Phonostages - Hifiverse audio equipment catalog

The device supports the operation of MM and MS cartridges. For the former, balanced and conventional inputs with a new step-down transformer are provided, in which the core is made of high-purity permalloy. The input stages are built on several FET transistors connected in parallel sequence. The amplifier is quite traditional with general feedback.

The circuit design of the device includes several cascades, which use radio tubes from the Slovak manufacturer JJ: four double ECC83 triodes, two double ECC82 triodes and an EZ81 tube rectifier. The phono corrector uses four boost transformers (two per channel) equipped with super-permalloy cores to increase performance.

Schiit Mani is a compact phono corrector for vinyl players that supports operation with MM and MC cartridges, equipped with four gain modes, low noise and distortion, as well as accurate RIAA correction; mode switches are located at the bottom of the case.

You can raise the level of the vinyl track with Mastersound amplification using the Stilo external MM/MS phono corrector. The device is powered by three lamps: 1 x ECC82 and 2 x ECC83. The internal boards are made of gold, and perhaps this is what gives the sound a deep gold gloss that sets Stilo apart from a number of other similar devices.

Fully balanced Class A phono corrector Inputs: 1 x XLR/RCA 5 equalizer curves, output phase selection, Outputs: XLR/RCA.

The huge reserves of the model's capacity ensure a fast and dynamic correct response and a huge reserve of power when dealing with complex and multi-layered music content. As many as nine (9) stages of filtering and regulating current and voltage per channel were implemented, as well as separate power sources for each audio channel (separate transformers and control circuits). It goes without saying that all digital circuits, input selection, and illuminated displays have their own dedicated, separate transformers, regulation, and filtering.

The compact body of the device is divided into two parts inside, which allows you to physically separate the power supply circuits from low-current circuits. The external power supply is built on a W-shaped transformer and housed in a separate enclosure. Separate inputs for the MM and MS heads are provided for connecting the vinyl player, and there are two outputs for connecting the corrector to the amplifier – the usual one for RCA and the symmetrical one for XLR.

A high-end phono corrector designed to work with MC cartridges. High-quality elements guarantee excellent dynamics. The character of the sound can be described as mature and sublime. The case dimensions are reduced compared to the standard version of Fezz Audio Gaia. High-quality components, capacitors and the Stabilized + EI standard transformer power supply unit guarantee excellent dynamics at the level of more expensive designs.

A high-end phono corrector for high-level MC cartridges. The design includes top-quality components such as Burson V5i operational amplifiers and a toroidal transformer from Toroidy.pl .

Fuzz Audio Gaia EVO Prestige MM/MC is a tube phono corrector. It is compatible with MM and MC cartridges. Two specially selected low-noise vacuum tubes 12AU7 are used for reinforcement. The extended power path is provided by the Supreme Audio amplifier Toroidy.pl the transformer.

The Gratia phono corrector is designed to work with MM, MC HO and MC cartridges. The amplification section is based on a top-class operational amplifier, the Burton Supreme Sound Opamp V5i. The heart of the power path is the Supreme Audio transformer Toroidy.pl Gratia MM / MC design refers to the current style of Fuzz Audio. The indisputable advantage of Gratia is its versatility.

A significant innovation of the Fezz Audio Gratia Prestige EVO Mk2 phono corrector is the addition of input capacity adjustment for movable magnet (MM) heads with options of 0.47, 100 and 220 pF. In addition, the novelty allows you to set the input impedance for MC cartridges with a choice of values of 1 kOhm, 470 ohms, 220 ohms and 100 ohms. These features allow you to customize and optimize the operation of the phono corrector with different pickup heads and based on personal preferences.

This device has the same housing as the BP-2 or BOT-1 and BUC-1 phono correctors and increases the output voltage to 3-6 mV, which will be enough for most MM-type phono correctors. The Bryston TF-2 is available in two versions.: with a gain of 20 and 30 dB. To select the correct version, we recommend following the following tips: if the output voltage of your pickup is between 0.1 and 0.2 mV, the version with a gain of 30 dB is suitable for you. From 0.4 to 0.5, use the version with a gain of 20 dB.

This device has the same housing as the BP-2 or BOT-1 and BUC-1 phono correctors and increases the output voltage to 3-6 mV, which will be enough for most MM-type phono correctors. The Bryston TF-2 is available in two versions.: with a gain of 20 and 30 dB. To select the correct version, we recommend following the following tips: if the output voltage of your pickup is between 0.1 and 0.2 mV, the version with a gain of 30 dB is suitable for you. From 0.4 to 0.5, use the version with a gain of 20 dB.

Made in the "micro" form factor (like the BUC-1 and BOT-1), the device works with MM/MC type pickups (61/72 dB). An external power supply (optional full-size PS-2 or new PS3 DC) serves not only to keep the device compact, but also to minimize possible interference from high-current circuits. The MM/MC modification is recommended to be used with the TF-2 boost transformer.

The Bryston BP-2 uses low-distortion broadband amplification. There are two phono corrector options available: MM only or universal MM/MC. The BP-2 phono corrector is ideal for most cartridges sold. Both versions include a switchable capacitive load for use with movable magnet cartridges.

The Ayre PX-8 Phono Preamplifier has two separate analog inputs with balanced and unbalanced connections and allows you to change gain and load settings from the front panel.

The PAM G2 reproduces recordings with an amazing degree of information diversity, revealing even the smallest nuances with full emotion, convincing with its exquisite naturalness and fidelity to details. Playing the fundamental minimum gives a deep sound and an authentic rhythm. The PAM G2 generates an amazingly wide tonal range, creating a superbly sophisticated musical experience with the highest degree of reality, in which music is not played, but brought to life.

According to the manufacturer, the phono corrector can be ordered with two MM inputs, with two MS and with MM and MS. If desired, the owner can later replace the replacement modules with the required ones. To adjust the corrector to the parameters of the heads, you need to remove the protective plate on the back panel — jumpers are found under it to adjust each channel of each of the inputs.

The AVM Audio PH 30.3 phono corrector is suitable for amplifying signals from MC as well as MM pickups. In order to perfectly adapt your system to receive the MC signal from PH 30.3, 100/200/1000 Ohm load adapters are included.