NAD

The NAD CI SA2-120 BluOS streaming integrated amplifier is a part of new CI Modular Series, and offers 2 x 120 W DirectDigital amp with built-in thermostatic cooling. 4 x 60 W configuration via Dynamic Load Management also exists.

The device uses Purifi Eigentakt technology. It almost completely eliminates harmonic and intermodulation distortion, providing a frequency response that is independent of load.

The model uses modified versions of Hypex UcD hybrid amplifier modules, characterized by low noise and distortion in the audible range. In addition, they are excellent at handling complex loads, as well as insensitive to long cable lengths.

The novelty's power is 185 watts for an 8 ohm load, and in bridge mode, the device is capable of delivering an incredible 620 watts for the same resistance load. A solid power supply provides enough current for reliable operation at a 4 Ohm load, at which the model outputs 340 watts of constant power and up to 570 watts of peak power.

The power is 150 watts for each of the eight channels, and in bridge mode, the device can output up to 365 watts for four channels. In addition to the analog and network inputs, the amplifier has optical and coaxial digital inputs. The device is built on Hyperx amplifier modules, network control and equalizer settings via a network interface are also provided.

Hypex UcD amplification modules are installed inside the thin case, delivering up to 120 Watts per channel in class D, while in bridge mode their power increases to 200 watts. However, at the same time, the number of channels is reduced by half. On the front panel there are LED indicators showing the number of active modules, as well as ventilation grilles that ensure heat dissipation from the output stages.

With balanced inputs, the C 268 is a natural choice for high-performance preamps and processors. These inputs have a trim control function, for matching with other components, or for two-amp connection to speakers. The through-line output allows you to add another power amplifier to the same channel for additional speakers or subwoofers. In addition, there is a bridge switch that turns the C 268 into a surprisingly powerful monoblock amplifier.

The seven-channel Masters M28 power amplifier embodies everything that is possible with modern amplification technology. It is one of the first amplifiers to use Purifi Eigentakt amplifier technology.

The NAD CI 980 is an 8-channel amplifier for professional installations. Output power is 8 x 50 W, at 8 ohms / 2 x 120 W, at 8 ohms (bridge connection). The ability to work in 4 zones. Individual level adjustment for each zone. Removable Phoenix-type acoustic terminals. Brackets for mounting in a rack rack.

The NAD C379 integrated amplifier is equipped with UcD output stages with proprietary HybridDigital technology, providing 80 watts of continuous power (when operating on a load with a nominal resistance of 4 and 8 ohms) and 120 watts of dynamic power for a load of 4 ohms.

NAD Electronics presented the C 389 integrated circuit at the High End exhibition in Munich. Like the NAD C 399 released last fall, the novelty received a modular design scheme — NAD Modular Design Construction, MDC2. The amplifier concept uses proprietary HybridDigital UcD circuitry in a balanced architecture. In addition, there is an ESS Sabre DAC on board, which processes PCM resolutions up to 32 bit/384 kHz.

NAD Electronics presented the C 389 integrated circuit at the High End exhibition in Munich. Like the NAD C 399 released last fall, the novelty received a modular design scheme — NAD Modular Design Construction, MDC2. The amplifier concept uses proprietary HybridDigital UcD circuitry in a balanced architecture. In addition, there is an ESS Sabre DAC on board, which processes PCM resolutions up to 32 bit/384 kHz.

Using Hypex modules allows you to connect devices with an impedance of 4 or 8 ohms, giving out 180 watts per channel. A DAC based on the ESS Labs Sabre ES9028 migrated to the NAD C 399 from the Master Series. It works with signals up to 32 bit/384 kHz.

The NAD C 700 v2 integrated amplifier is based on the C 700 model and looks almost identical to it. But inside there is an improved DAC from the same manufacturer — ESS Sabre. In addition, the novelty can correct the Dirac Live room.

According to the developers, the circuitry in the C 700 is characterized by a minimum level of distortion and noise. They promise the output power of 2 × 80 watts on a constant basis and 2 ×120 watts at its peak.

The output stages of the NAD M10 V3 integrated amplifier are based on HybridDigital assemblies with nCore technology, which provide 100 watts of continuous power (for loads with a nominal resistance of 8 and 4 ohms) and 160 watts of dynamic power (8 ohms) with virtually zero noise and distortion, according to NAD.

The amplifier part of the device is built on Eigentakt HybridDigital class D modules, which develop power up to 200 Watts per channel, and Sabre chips with 32 bits are used in the DAC section, which also support Meridian's MQA format.

The NAD AMP1 is a super compact and incredibly efficient stereo amplifier that sets new standards for its category. Here you get convincing pure power and true hi-fi sound quality without any unnecessary words, without looking at the big device in the rack. And thanks to the built-in Chromecast, you can stream high-quality wireless music all over your smartphone.

The NAD D 3045 is an improved version of the integrated amplifier D 3020 V2. The most noticeable change in the NAD D 3045 amplifier compared to the NAD D 3020 V2 is the presence of a USB-B input, an ARC-enabled HDMI input, and an additional optical input.

The device is based on the proprietary Power DriveS circuit, which is tolerant to the resistance of the connected acoustics. The device has a distortion level of 0.03%, a signal-to-noise ratio of 95 dB; the output power reaches 2 x 45 or 2 x 60 watts for loads of 8 and 4 ohms, respectively.

The V2 device uses the same Hypex hybrid modules, which allow the device to develop a constant power of up to 30 watts per channel and up to 100 watts at peak. The shape of the body also remained unchanged, the chassis is organized in such a way that the device can be positioned both horizontally and vertically.

With a 100W UcD HybridDigital amplifier per channel and a Texas Instruments high-resolution differential DAC, the C 3050 delivers sound that will amaze today's discerning listeners. And with MDC2's future protection technology against NAD, C 3050 owners can add advanced features such as BluOS high-resolution streaming and Dirac Live room correction.

The NAD C328 is built around the classic NAD principle of "the simpler, the better". At the same time, the developers will modernize the topology by replacing the voracious output stage in class AB with a customized version of Hyper UcD running in class D. The device outputs 50 watts per channel at 4 and 8 ohms with 0.03% THD and a signal-to-noise ratio of 100 dB.

Hybrid digital stereo amplifier. 2 x 50 Watts, Wi-Fi with the ability to stream various music services, Internet radio, Google Cast and UPnP support, Bluetooth®, MM phono input, TV audio input, SPDIF coaxial and optical inputs, subwoofer output, headphone amplifier, woofer equalizer, remote control, smartphone application.

The NAD C 368 is an integrated amplifier. The power of the C 368 is 80 watts per channel at 4 and 8 ohms. The eight-channel DAC chip operates in a dual differential mode (four channels on each side), increasing the resolution. The chip receives a signal from two coaxial and two optical inputs. The aptX Bluetooth module allows you to transfer music from a tablet or to wireless headphones.

The NAD C 388 is an integrated power amplifier with a built–in DAC and a separate headphone amplifier, with low output impedance and very high voltage, which allows you to use even studio headphones with high resistance. The RS-232 port makes the NAD amplifier an indispensable companion of the installer (Control4, Crestron, RTI, URC, AMX, Savant, Elan certification).

The NAD CI 720 V2 is the ideal solution for adding gain to a single stereo area in a multi-zone system. With the ability to be used in a 64-zone system, the NAD CI720 V2 amplifier provides easy access to local storage, intranet radio, popular streaming services and control systems such as Crestron and Control4. And as a BluOS-enabled device, the amplifier can be easily integrated with other NAD products, as well as wireless multiroom players. Thanks to HybridDigital's amplification technology, the CI720 V2 can "rock" almost any speaker.

The integrated DAC unit in the NAD M66 is based on ESS Technology's Sabre ES9038PRO chips. In addition, there is also an MM/MC phono corrector. But this is not the end of the list of distinctive features of the NAD M66. The new product implements Dirac Live Room Correction and Dirac Live Bass Control technologies, "which allows the NAD M66 to provide a more accurate indoor response than any dual-channel component ever offered."

The NAD C 658 is BluOS Enabled, which means it boasts the most sophisticated high-definition streaming system. BluOS natively supports almost 20 streaming music services and indexes more than 250,000 tracks from local network sources.

PP 4 Digital Phono/USB Preamp allows you to digitize your favorite vinyl record collections. The device is equipped with low-noise inputs for both MM (with a movable magnet) and MC (with a movable coil) types for a wide variety of pickups, as well as a line input for cassette transmission. PP 4 includes Studio Lite software for copying and recording records. The Phono-to-USB PP 4 preamp offers a complete software and hardware solution with exceptional flexibility for recording from LP or cassette.

The NAD PP 2e is a new MM/MC phono corrector model with an external power supply. It's perfect for budget-conscious audiophiles, it's incredibly easy to use, and it's sure to be a treat for vinyl record lovers. Its distinctive features are a low noise level, a wide band of MM & MC phono correction, through it you can connect your vinyl player to almost all amplifiers and receivers. It has gold-plated input connectors, an LED power indicator, and a 24 V external power supply.