Pro-Ject

Pro-Ject The Classic Reference Turntable looks beautiful and demonstrate natural “sound wall” listening expirience. The mofel based on The Classic EVO turntable and available with a hand-selected Vienna Philharmonic Orchestra Anniversary cartridge. The sound of this MC-cartridge (manufactured by Ortofon according Pro-Ject’s specifications) was tuned with members of the Vienna Philharmonics.

Austrian company Pro-Ject presented the largest model of the Pro-Ject Debut series of vinyl turntables, Pro-Ject Debut PRO S Balanced. The new product is equipped with a balanced output, which allows it to be used for connection to current Pro-Ject phono preamplifiers. The new player will replace the popular Pro-Ject Debut PRO model in the company's product range.

Like the top-level model 12, the Pro-Ject Speaker Box 10 E Carbon speakers are designed as a 2.5-way system operating in a phase-inverted design with a port located on the rear wall of the case. The crossover is made on discrete elements and provides a flat frequency response.

The Pro-Ject Speaker Box 12 E Carbon is a 2.5-way speaker system featuring a 1-inch silk dome tweeter, which the manufacturer claims should deliver clear high frequencies. This tweeter works with two 16.5 cm carbon composite woofers.

The Pro-Ject Amp Box RS2 power amplifier is built using a hybrid scheme - the preliminary amplification stage in each channel is implemented on a dual triode 6922 (6DJ8). The solid-state output stages operate in the traditional class A/B and provide up to 80 W in each channel when working on a load with a impedance of 8 Ohms and 130 W for a load of 4 Ohms. In bridge mode, the amplifier is capable of developing up to 350 W.

This is a two-way system with a bass reflex and an MDF housing. The same 0.75-inch tweeters with a silk dome are used here, and the midrange/woofer drivers are different. The Pro-Ject Speaker Box 3E Carbon model has drivers with carbon fiber diffusers with a diameter of 3 inches too.

The Pro-Ject Audio DAC Box RS Final Edition DAC offers a rich switching set, which includes an I2S input with Master Clock, a balanced AES/EBU input, an optical Toslink, a coaxial input, and a USB-B port. The DAC is capable of decoding audio in DSD formats up to DSD128 and PCM up to 24 bit/192 kHz (24 bit/96 kHz for the optical input). The new product is based on a pair of Texas Instruments PCM 1792 chips and offers a choice of digital filters. Output stages - ECC88 Diamond selection high-end tube and solid state (switchable).

The A1.2 has a fully automatic start/stop and offers an 8.3” ultra-light-mass aluminium tonearm, built-in switchable phono preamp, and Pro-Ject MM E cartridge.

The Pro-Ject Automat A2 vinyl record player supports three rotation speeds – 33 ⅓, 45 and 78 rpm. Unlike the Automat A1 model, the rotation speed is no longer tied to the plate size. This allows you to independently determine the starting point of playback, that is, the point at which the needle descends onto the record.

The Pro-Ject Automat A2 vinyl record player supports three rotation speeds – 33 ⅓, 45 and 78 rpm. Unlike the Automat A1 model, the rotation speed is no longer tied to the plate size. This allows you to independently determine the starting point of playback, that is, the point at which the needle descends onto the record.

ProJect E1 is a turntable with a passionic drive and speeds of 33.3 and 45 rpm, electronically switchable. An 8.6-inch-long gimbal arm with an aluminum tube is mounted on the turntable.

The player can be mounted on a table or shelf using a special rear support or hung on the wall (brackets included). It works in an upright position.

The Pro-Ject VT-E BT is the world's first vertical wireless vinyl turntable that combines advanced design and easy setup. This record player is designed for those vinyl fans who would like to purchase an original design model that occupies a minimum of room space.

The case is made of a special composite material, and the 8.6-inch aluminum tube tonearm uses sapphire bearings. An Ortofon OM MM cartridge is installed on it, and all the necessary settings have already been made at the factory. The support disc is made of high-density fiberboard and coated with a special compound.

ProJect Primary E Phono is an audiophile player with a pre-tuned tonearm, and at the same time without compromises in sound. The lightweight aluminum tonearm is optimized for the Ortofon cartridge and reaches its full potential. The Primary E Phono model is equipped with a switchable output (phono/line), which allows you to connect the player to an external phono corrector or use the built-in and directly connect the player to the line input of other devices.

In addition to the vinyl player itself, three RCA inputs and a Bluetooth connection are available (the DAC is available, the manufacturer does not disclose its characteristics). Volume control is available both via the included remote control and via a 32-step potentiometer on the front panel of the device.

The Juke Box S2 has a built-in phono corrector, stereo power amplifier, and even a Bluetooth receiver for wireless music playback from mobile devices. Its Class D amplifiers develop a power of 50 watts per channel, which allows you to use almost any modern Hi-Fi acoustics in conjunction with the player.

The model is equipped with a pass–through drive and supports two speeds of rotation of the support disc - 33 1/3 and 45 rpm. The speed switch is electronic. The heavy support disc of the T1 EVO turntables is made of glass to maximize resonance reduction, and a felt mat is included. The turntable is supported by vibration-proof legs that reliably protect the turntable from external influences.

Pro-Ject T1 EVO BT is a stylish Bluetooth player made of high-quality materials with electronic gearshift, glass disc and Ortofon OM10 cartridge.

Pro-Ject T1 Phono SB (OM 5E) is a vinyl record player with a passionic drive and an Ortofon OM 5e MM cartridge. The model is distinguished by the presence of an electronic disc rotation speed switch (33 or 45 revolutions per minute), as well as a built-in phono corrector.

All the main advantages of the previous T2s in the "just" T2 player are obvious. First of all, it is a heavy glass disk that is spectacular in terms of design and effective in terms of audio. Its rotation speed (traditionally belt-driven) is electronically controlled. The 9-inch aluminum tonearm is equipped with a spring antiskating and a pre-installed Japanese Sumiko Rainier cartridge.

The model is almost an exact copy of the T2 W model, but without the wired functionality. The turntable received a 9-inch aluminum tonearm with a pre-installed Sumiko Rainier MM cartridge and a built-in phono corrector.

Pro-Ject T2 W (Rainier) is a vinyl record player. The T2 W intelligently enhances the highly regarded T1 formula by introducing innovative Wi-Fi streaming technology. This innovative feature provides uninterrupted streaming to a wide range of modern network audio devices, including HiFi streamers, network-connected home theater A/V receivers, and state-of-the-art streaming speakers.

The support disc of the Pro-Ject Debut EVO 2 is made of particularly durable aluminum and damped using TPE, which also eliminates resonances. The disc is driven by a passic by means of a subdisc from a silent motor with electronic speed control. The new product supports speeds of 33 1/3, 45 and 78 revolutions per minute.

A special feature of the Pro-Ject Debut PRO S Balanced player is the tonearm used here. This is an S-shaped tonearm, which is clear from the model name, made of aluminum and anodized in black. The length of the tonearm is 10 inches, which guarantees tracking the groove of the plate with minimal error.

Pro-Ject Debut PRO B is a vinyl record player. After the Debut Carbon EVO revolutionized the Debut series in 2020, the Debut PRO raised the bar even higher. The Debut PRO B now receives a new MM — Pick it PRO Balanced cartridge. The new Pick it PRO Balanced delivers the same lively and robust sound and is now also ready for use in our True Balanced Connection.

The Pro-Ject Debut PRO B turntable features a proprietary 8.6-inch Carbon-Aluminum tonearm with a lightweight and rigid carbon fiber tube and aluminum elements to achieve better damping and shielding, resulting in increased resistance to interference.

The Pro-Ject Debut PRO B turntable features a proprietary 8.6-inch Carbon-Aluminum tonearm with a lightweight and rigid carbon fiber tube and aluminum elements to achieve better damping and shielding, resulting in increased resistance to interference.

The entry-level RPM 1 Carbon model features a low-resonance chassis and an updated inverted bearing bearing with a precision ceramic ball. The drive motor is mechanically decoupled from the chassis and powered by a precision alternator with an external power supply, which improves the accuracy and stability of the disk rotation speed.

The RPM 3 Carbon turntable has the same design as the RPM 1 Carbon, it is equipped with the same tonearm (10 inches long), bearing and motor. However, if the support disc of the "first" model is made of fiberboard and complemented with a felt mat, then the "three-piece" disc has a multilayer structure and a vinyl surface that does not require the use of an additional mat.

The Pro-Ject RPM 5 Carbon (DC) turntable has a damped MDF chassis and is equipped with an acrylic support disc on a precision bearing. The player is equipped with a 9-inch EVO tonearm.

The Pro-Ject RPM 9 Carbon (DC) (Quintet Bronze) turntable has a combined chassis that provides almost complete damping of vibrations and resonances, and a massive aluminum support disc. A 9 cc Evolution tonearm with an Ortofon Quintet Blue pickup is pre-installed on this model.

The top model in the series, the Pro-Ject RPM 10 player has the most advanced design in its class today. The player is equipped with a high-end proprietary tonearm, a large-weight support disc, is mounted on a vibration-insulating platform and has an electronic disc rotation speed switch.

The Pro-Ject The Classic Evo player has an improved sub-chassis, which has become heavier and stiffer to reduce resonances. In addition, the aluminum support disc in the Pro-Ject The Classic Evo player is made with high precision from a special aluminum alloy and damped using TPE.

The player's motor is electronically controlled and supports speeds of 33, 45 and even 78 revolutions per minute. The player uses an external switching power supply, which can be replaced with an optional linear Pro-Ject Power Box RS2 Phono, if desired.

The Pro-Ject XA B player is equipped with an aluminum tonearm and a combined support disc. Together with the complete Pick It PRO Balanced cartridge and special vibration-proofing supports, the manufacturer managed to make the novelty come alive with "convincing, dynamic and detailed sound handwriting."

The Pro-Ject X1 B vinyl turntable opens up balanced connectivity options for music lovers at the most affordable price. The model is equipped with a balanced output, which allows you to get a minimum noise level and a wide dynamic range of sound. An MM pickup is pre-installed on the tonearm with a double-layer carbon and aluminum tube, and the position of the cartridge on the tonearm is adjusted at the factory, which simplifies the initial setup of the player.

The Pro-Ject X2 B is a vinyl record player, ready for balanced connection, thanks to the mini-XLR outputs. The player is equipped with a damped carbon fiber and aluminum tonearm, which guarantees sound accuracy.

The Pro-Ject 6PerspeX player, first of all, became famous for its unusual design. The table made of transparent acrylic, mounted on black anodized aluminum supports, and the frame, also black, look very stylish.

The X8 B offers a heavy, damped, weight-loaded disc, precision-chiseled from a solid aluminum block and perfectly balanced.

The basic Pro-Ject Xtension 9 player is conceived as one of the most convenient and easy-to-use turntables from the Austrian company, combining a sturdy chassis with a heavy aluminum disc mounted on an inverted bearing.

The Xtension 10 Evolution player is equipped with an MDF chassis, the special cavities of which are filled with ballast to increase the total weight, mounted on vibration-proof magnetic supports. The base disc of the turntable is made of a metal alloy, has a damping inner coating of sorbotane and an outer vinyl one, for optimal mechanical contact with the record. The Evolution 10 cc tonearm is 10 inches long and is suitable for mounting a wide variety of pickups due to its wide range of counterweights.

The top model in the Classic line, the Xtension 12 Evolution player is equipped with a 12-inch tonearm and has an impeccable design that ensures exceptionally accurate reproduction of analog recordings.

The Pro-ject Signature 10 is an uncompromisingly high–quality vinyl record player with the most sophisticated concepts. The chassis of the turntable is made of high-quality fiberboard and filled with metal granules, which add extra weight to the structure and suppress vibrations. The Pro-ject Signature 10 uses magnetic supports that physically detach the player from the surface on which it is mounted, which reduces the likelihood of resonance and makes it possible to fully enjoy clear and high-quality sound.

At the base of the Pro-Ject Signature 12.2 player is a massive MDF chassis, which is even heavier than its predecessor and now has rounded corners. There are no recesses in the player's body where resonances can occur that harm the sound. The chassis is supported by vibration-proofing legs, which can be adjusted from above to compensate for any unevenness of the turntable installation surface.

The Pro-Ject Elementary Phono USB Final Edition player is equipped with a built-in phono corrector. In addition, the novelty has a Delta-Sigma ADC, which digitizes an analog music signal from a record in PCM format with a resolution of 16 bits/48 kHz and outputs it to a computer running Windows or macOS via a USB-B port.

The Pro-Ject T1 turntable has a one-piece chassis with excellent anti-resonance characteristics mounted on damping supports. The 8 mm thick tempered glass disc is complemented by a subdisc mounted on a precision bearing made of steel and bronze. The player has a low-noise motor with high rotational speed stability.

The Debut RecordsMaster II comes with improvements such as increasing the size and weight of the disc to ensure even smoother rotation, and the overall sound quality is significantly improved.

The Pro-Ject X8 Special Edition player immediately attracts attention. The combination of black lacquer and metallic coating on the edges of the table gives the model a strict, refined look. The flagship Ortofon MC Quintet Black S cartridge is selected as the pickup head. The cartridge provides exceptionally accurate tracking with almost complete absence of resonances and stray vibrations, high detail and a surround sound stage.

The Pro-Ject Debut S is a belt–driven vinyl record player for advanced beginners that will delight amateur audiophiles.

The Pro-Ject AC/DC player is equipped with a new low-resonance tonearm, with an original design that repeats the elements of the bright AC/DC logo. This 8.6-inch acrylic tonearm is equipped with a spring antiskating system to ensure accurate tracking of the groove of the record. The player is supplied with a pre-installed Ortofon 2M Red pickup head with a movable magnet (MM).

The Dark Side Of The Moon Turntable is part of the Pro-Ject Artist Series of turntables and is equipped with a distinctive rainbow LED backlight. When the record rotates, the refracted light from the iconic album cover is recreated. There is also a dimming function, and the on/off lever of the player performs the function of a beam of white light.

A passionic turntable, the body of which is the logo of a group of crossed zippers. The table is made of fiberboard, while the top panel is made of a metal alloy. The subdisk is made of aluminum, and the main disk is completely made of glass. The kit includes an 8.6-inch S-shaped tonearm with an anodized aluminum tube, and a Pick it S2C MM head with an elliptical needle.

Structurally, the model is a classic turntable with a glass support disc, an S-shaped tonearm and anti-vibration supports. The model comes with an Ortofon MM cartridge called Sonar, which is a special version of the Concorde model. It is enclosed in a yellow case to complement the player's color scheme.

The player, called "George Harrison Essential III", was designed by Studio Number One, a California-based design agency, and uses a 2014 lithograph created for Harrison's heirs by artist Shepard Fairey. It will be released in an edition of 2,500 pieces.

The reference disk in the Pro-Ject Essential III (OM 10) model, Special Edition: Sgt. Pepper is made of selected MDF and has a uniform density for maximum stable rotation. The disc is supported by a stainless steel projection bearing and is driven by a reliable pass-through drive. The player is equipped with a mat mat, which provides additional damping of the record.

The Pro-Ject Rolling Stones Record player vinyl player has become another model of this company dedicated to the work of legendary rock musicians. This time, the ProJect's designers have designed a classic Debut III player in the style of Rolling Stones albums, which fans of this team will surely appreciate. The Pro-Ject Rolling Stones Recordplayer is available in black and white lacquer finishes, with a recognizable red tongue that has become a kind of "Rolling Stones" logo.

As befits a player dedicated to the "white album", all the structural elements of the novelty are painted white, including a nine-inch EVO tonearm and a pressure disc. Moreover, Ortofon has even released a special version of the 2M series MM head in a white case for this turntable.

The designs remained traditional for the original model – an 8.6-inch aluminum tonearm with sapphire bearings, a pre-installed Ortofon OM10 MM cartridge, and a pass-through drive. The kit also includes a dust cover and an interblock RCA Connect-IT cable.

The model based on the Debut Carbon Esprit SB player followed the George Harrison that appeared in January 2017. The first two will be followed by four more Beatles turntables. The design of the 1964 Beatles used original brochures, as well as tickets for the band's performances during the tour, which began in June 1964.

2Xperience SB «Sgt. Pepper" Limited Edition is the third of six collectible models of Pro-Ject players. The design of the model uses a print depicting a bass drum from the cover of this legendary album. There are only 1,000 copies of this exceptional player available in the world.

Vinyl record player, designer version based on the Primary model, 8.6“ tonearm, pass-through drive, acrylic disc, speed control 33; 45 rpm; Ortofon OM5e MM cartridge, dust cover, dimensions 420 x 112 x 330 mm, weight 4 kg.

The Pro-Ject Essential II DC player belongs to one of the company's budget lines and is a new version of the Essential model with an improved power supply.

The Pro-Ject PS00-Wave vinyl disc player by Parov Stelar is based on the proven Debut Carbon Esprit DC (2M Red) player and is available in limited quantities - 1000 pieces worldwide!

The Pro-Ject PS00-Frida vinyl disc player by Parov Stelar is based on the proven Debut Carbon Esprit DC (2M Red) player and is available in limited quantities - 1000 pieces worldwide!

The Pro-Ject Hard Rock Cafe vinyl player was created in collaboration with the Hard Rock Cafe. The player's table is covered with a unique painting from the Hard Rock Cafe, which makes the player not only an excellent turntable, but also an essential attribute for every Hard Rock connoisseur. The player comes with a pre-installed OM5e MM cartridge, from the pioneers of Ortofon vinyl. The player is available in a limited batch, which makes it more valuable for connoisseurs of high-quality sound and fans of heavy music.

Phono Box E is an ideal phono amplifier for such systems. It works with MM pickups and offers audiophile-grade audio at an entry-level price. Advanced circuitry and SMD design keep noise and distortion at a surprisingly low level. Built-in internal shielding and an external power supply unit eliminate the risks of interference and interference. Due to its small size, the Phono Box E can be placed right next to the player.

In the case of the device, users will find two inputs — the input for the corrector and the linear one. There are also two exits. The first one, 3.5mm, is used to connect to an amplifier. The second is the Bluetooth 5.0 streamer module with support for aptX and aptX HD codecs. With good recording quality on a vinyl record, the Phono Box EB T5 is ready to stream music to mobile gadgets.

Optical Box E Phono is a multi-purpose phono corrector with analog-to-digital conversion and two output options: linear and digital optical! This small box will appeal to anyone who wants to use the turntable with digital-only devices such as home theater receivers, soundbars, or all-in-one systems.

The entry-level phono corrector Pro-Ject Phono Box E is designed to work with MM pickups of various models. This device is very easy to use and fully complies with the Plug-and-Play principle. On its back panel there are two pairs of gold-plated RCA jacks (input and output, respectively), a ground terminal, as well as a connector for connecting an external power source. The phono corrector is useful in a situation where the standard system amplifier does not have a special input for connecting a vinyl player, and its replacement is not planned in the near future.

In the case of the device, users will find two inputs — the input for the corrector and the linear one. There are also two exits. The first one, 3.5mm, is used to connect to an amplifier. The second is the Bluetooth 5.0 streamer module with support for aptX and aptX HD codecs. With good recording quality on a vinyl record, the Phono Box EB T5 is ready to stream music to mobile gadgets.

Optical Box E Phono is a multi-purpose phono corrector with analog-to-digital conversion and two output options: linear and digital optical! This small box will appeal to anyone who wants to use the turntable with digital-only devices such as home theater receivers, soundbars, or all-in-one systems.

Phono Box is the ideal phono corrector for these hifi systems, which accepts both MM and MC cartridges.

The Pro-Ject Phono Box MM is made in a compact metal case that provides good protection against external electrical interference. The device has a simple design and is made using high-quality components. The preamp circuit is based on the dual mono principle, which should provide a good stereo picture with minimal crosstalk.

The universal phono corrector for MM and MC-type pickups, the Pro-Ject Phono Box S2, is part of the company's updated series of components, whose models have received improved circuitry, as well as a more attractive design. The device is made in a metal case made of aluminum and steel, which provides good protection for sensitive electronic circuits from electrical interference and mechanical vibrations. The Pro-Ject Phono Box S2 is powered by an external DC power supply.

The Pro-Ject Phono Box S2 Ultra features a close to flawless RIAA correction curve, and also gives the user the ability to adjust the gain, resistance, and capacitance levels for use with almost any movable magnet and movable coil heads.

The Pro-Ject Tube Box S2 Ultra phono corrector is designed to work with MM and MC type cartridges. A special feature of the model is the use of vintage lamps, which are selected manually based on linearity and identical characteristics. They give the sound a special warmth and expressiveness. The device has all the necessary settings to work with different cartridge models. The Pro-Ject Tube Box S2 Ultra is available in a special chrome finish.

The model can work with both MM heads and movable coil pickups. For better matching with different models, the user can choose from four gain levels (40, 45, 60 and 65 dB), five input resistance values (10, 50 and 100 ohms, 1 and 47 kOhm) and four pluggable capacitances (50, 150, 300 and 400 pcF).

An interesting feature is the ability to smoothly adjust the input resistance level in the range from 10 to 1000 ohms when connecting the MS heads. For pickup heads with a movable magnet (MM), a fixed resistance level of 47 kOhm is set, but for them you can choose from four plug-in capacity options - 50, 150, 300 or 400 picofarads.

The Pro-Ject Phono Box DS3 is a phono corrector designed to work with MM and MC cartridges. The feature of this model is a fully balanced circuit design. Using a balanced connection ensures a detailed and neutral sound. The audio circuit of the Pro-Ject Phono Box DS3 B is performed entirely on discrete components to eliminate distortion.

According to the manufacturer, the novelty is implemented in a fully balanced circuit design on discrete elements with passive equalization of RIAA and DECCA curves for both movable magnet (MM) and movable coil (MC) heads.

The Pro-Ject Pre Box S2 Analogue is a compact preamp designed to work with analog signal sources. The model provides high-quality sound with minimal noise and distortion. The preamp has three line inputs: two on the RCA connectors, and one on the 3.5mm mini–jack connector.

The new Pro-Ject Pre Box S2 Digital Edition 2023 is based on the audiophile ESS Sabre ESS9038Q2M DAC chip and is designed in a dual mono concept. The component is capable of decoding digital PCM streams with a resolution of up to 32 bits/768 kHz and DSD up to DSD512. The MQA format is also familiar.

This device, made in a compact metal case, combines the functions of a preamp, headphone amplifier and DAC with support for all the latest audio formats. The Pro-Ject Pre Box RS2 Digital is equipped with all types of digital inputs, including a USB type B port with the ability to receive PCM signals with parameters up to 32 bits / 768 kHz, as well as DSD512.

The Pro-Ject Amp Box DS2 is a stereo power amplifier that will be an excellent base for a high-end stereo system or home theater. Despite its compact size, the device develops significant power output and will work perfectly with a wide variety of acoustics.

Perhaps he was referring to the Pro-Ject Amp Box RS— a stereo power amplifier that is part of the top RS Line from Pro-Ject.

The Pro-Ject Amp Box DS2 is a stereo power amplifier that will be an excellent base for a high-end stereo system or home theater. Despite its compact size, the device develops significant power output and will work perfectly with a wide variety of acoustics.

Amp Box DS2 Mono is a mono power amplifier from Pro-Ject Audio Systems. The four-layer printed circuit board allows for shorter signal paths, which improves sound compared to the previous model.

The Pro-Ject Amp Box S3 is a compact power amplifier equipped with an RCA input. The amplifier develops up to 50 watts per channel with a speaker resistance of 4 ohms. The range of features of the device is very wide - use it in conjunction with a streaming player with an adjustable output, in multiroom systems or in a home theater. The Pro-Ject Amp Box S3 amplifier is suitable for voicing medium-sized rooms. The model is equipped with class D amplifiers.

The Pro-Ject Amp Box S3 CI uses special pads optimized for professional use to connect speakers. There is also a standard 12V trigger input and output for any installation device and an RS232 interface. In addition, it should also be noted that the amplifier has not only an input sensitivity control, but also a low and high frequency control.

The Pro-Ject Head Box S2 headphone amplifier is small in size and can be easily installed on a desktop or near an audio system. At the same time, in terms of sound quality, this device is in no way inferior to larger models and is able to work with various models of headphones.

The Pro-Ject Head Box S2 Digital is equipped with multiple digital inputs and supports High resolution audio conversion. The device has a built-in amplifier for audiophile-class headphones, as well as a line-out for connecting an external integrated amplifier.

The Pre Box S2 Digital – since its release back in 2017 – has quickly ascended to an exceptional status in the DAC market and gained a reputation among digital and PC-audio enthusiasts for its remarkable ability to compete way above its price point.

Despite the fact that the Pro-Ject Stereo Box E integrated amplifier belongs to the initial state of Hi-Fi technology, it stands out for its rich functionality – there is a DAC unit, a phono corrector for cartridges with a movable magnet (MM) and a Bluetooth adapter with support for the aptX HD codec for wireless streaming of high-resolution audio.

The Pro-Ject Media S3 integrated amplifier impresses at first glance thanks to its premium aluminum housing. It not only gives the model an interesting look, but also allows you to eliminate interference and make the operation of the MaiA S3 more stable. The amplifier's circuitry is based on the dual mono principle. A motorized Alps potentiometer is used as a volume control.

To connect the sources, the novelty offers two analog inputs on RCA connectors. There is even a pre-amp output implemented on the 3.5mm mini jack connector. The amplifier develops 21 Watts in each channel when operating on a load with a nominal resistance of 8 ohms and 40 Watts at a load of 4 ohms. High-quality screw terminals are provided for connecting acoustic systems.

ProJect MaiA DS3 is a new generation integrated amplifier with amazing sound and advanced technology. The device develops a power of up to 140 watts per channel and is compatible with floor and shelf acoustics of various brands. Up to 9 signal sources can be connected to the amplifier, including a vinyl player, a computer via USB, and mobile gadgets via Bluetooth.

The Pro-Ject Stereo Box DS3 is implemented in a dual mono concept. The output amplification stages are capable of developing up to 150 watts when operating on a load with a nominal resistance of 8 ohms. There is also a high-quality headphone amplifier, offering an impressive 450 MW of power for headphones with a resistance of 32 ohms.

Digital-to-analog converter DAC Box E: a real pleasure from listening to digital sources at an absolutely favorable price! The entry-level E DAC is an excellent digital-to-analog converter for digital audio sources using optical and coaxial connections. Despite the low price, it sounds great and supports HD music data up to 24/192 kHz.

The DAC is equipped with a USB port, optical and coaxial inputs, as well as a linear analog output. Via the USB input, the DAC supports digital PCM streams with parameters up to 32 bit / 768 kHz and DSD up to 256 MHz, that is, it is capable of reproducing audio material in the latest High Resolution formats.

The Pro-Ject Audio DAC Box RS Final Edition switching arsenal includes an I2S input with Master Clock, balanced AES/EBU input, optical Toslink, coaxial input and USB-B port. The component is capable of decoding audio in DVD formats up to DSD128 and PCM up to 24 bit/192 kHz (24 bit/96 kHz for optical input). The novelty is based on two PCM1792 DAC chips from Texas Instruments and offers the ability to select digital filters according to the listener's sound preferences.

The conversion is entrusted to a dual ESS Sabre 9038Q2M chip, and the set of inputs includes two optical, one coaxial, one AES/EBU, a USB 2.0 port, as well as an HDMI connector for receiving an I2S signal from a Pro-Ject CD Box RS2 T CD player.

The Pro-Ject Pre Box RS2 Digital preamp is designed in a balanced configuration and is built in the "dual mono" concept using two ESS9038Q2M Sabre32 DAC chips from ESS Technology (one in each channel).

The Pro-Ject CD Box E is the first CD player from the Austrian company Pro-Ject in the budget series Elementary. The quality of the model can be assessed at a glance: the compact metal body and aluminum front panel negate vibrations and electrical interference.

The DAC in the Pro-Ject CD Box S3 is based on the Burr-Brown PCM5102 chip from Texas Instruments. Data from a CD is decoded after upsampling to 32-bit / 384 kHz parameters. As a result, the dynamic range is expanded and distortion is minimized.

Specialized CD players are significantly better at reproducing stereo CD recordings than DVD or Blu-ray players. CD Box DS2T is designed as a pure audio CD transport that transmits high-precision digital signals of the "Red Book" standard to an external digital-to-analog converter.

The Pro-Ject Stereo Box DS3 is a classic integrated stereo amplifier in a compact package. The device is equipped with three line inputs and an output for MM or MC pickups. With an output power of up to 150 watts per channel, the Pro-Ject Stereo Box DS3 works perfectly with a wide variety of acoustics.

The Pro-Ject Stereo Box DS3 is a classic integrated stereo amplifier in a compact package. The device is equipped with three line inputs and an output for MM or MC pickups. With an output power of up to 150 watts per channel, the Pro-Ject Stereo Box DS3 works perfectly with a wide variety of acoustics.

The high-quality CD transport Pro-Ject CD Box RS2 T is the top model of this class in the catalog of this Austrian company. The device has a top-loading disk drive based on a precision mechanism. The Pro-Ject CD Box RS2 T is the perfect embodiment of the Red Book Audio CD standard, which will allow you to hear your CD collection in a new way.

The Pro-Ject Stream Box S2 offers support for high-resolution data up to 24 bit / 192 kHz, and it is also possible to build a fully wireless network. ? stereo systems (can you arrange one?one for the left channel and one for the right channel).

The Pro-Ject Stream Box S2 Ultra is a DLNA-compatible USB network transport, that is, it is designed for USB connection to an external DAC. The device supports playback of files in PCM formats (up to 32 bit / 352.8 kHz), as well as DSD256, can work with TIDAL, Spotify services and receive Internet radio.

The Pro-Ject Bluetooth Box E HD receiver is designed for wireless streaming of music from smartphones and tablets to an audio system. The APTX and SBC codecs are supported. The frequency range ranges from 20 Hz to 20,000 Hz.

Support for the improved aptX-HD audio codec guarantees detailed and dynamic music sound. The ProJect BT Box S2 HD analog output circuit allows you to evaluate the many years of experience of ProJect engineers in creating Hi-Fi technology. BT Box S2 HD is equipped with analog (on RCA connectors) and optical outputs.

The Pro-Ject Speaker Box 3 E is an ultra-compact audiophile two-way monitor speaker system from the Pro-Ject Audio Box Design series with a bass reflex, which is guaranteed to deliver impressive sound and powerful sound with its small size. This sleek two-way speaker system can also be mounted to a wall, making it ideal for a variety of purposes. This is a wonderful demonstration of how a compact bookshelf speaker system can deliver an exceptional audiophile experience, exceeding expectations with powerful sound despite its small size.

The Pro-Ject Speaker Box 3 E Carbon is an ultra-compact audiophile two-way monitor speaker system from the Pro-Ject Audio Box Design series with a bass reflex, which is guaranteed to deliver impressive sound and powerful sound with its small size.

The Pro-Ject Speaker Box 5 E is a two–way speaker system with a phase-inverted design. The high-frequency range here is voiced by a tweeter with a silk dome with a diameter of 1 inch. The rest of the spectrum is assigned to the 5-inch speaker, whose conical diffuser is made of Fiberglass fabric.

The model's bass reflex is mounted on the back wall and it is worth providing a little more space for such sticks on the shelf. Speaker Box 5 E Carbon, with a minimum amplifier power of 10 watts, is able to withstand all 150.

The Pro-Ject Speaker Box 5 S2 shelf speakers are perfect for Hi-Fi systems placed in medium-sized rooms. Despite their compact size, these speakers deliver rich bass, dense, energetic sound, and a wide stereo picture. The Pro-Ject Speaker Box 5 S2 is made using selected components, and its robust MDF housings look very attractive due to the high-quality exterior finish.

The compactness of the new product in comparison with the older model is due to the use of midrange/woofer speakers with carbon fiber diffusers with a diameter of 10 cm, while the Pro-Ject Speaker Box 12 E Carbon speakers are equipped with speakers with diffusers with a diameter of 16.5 cm. All models of the line have the same tweeters, with a 2.5 cm diameter silk dome.

The Pro-Ject Speaker Box 12 E Carbon speakers are made in a 2.5-band configuration and feature an inch tweeter with a silk dome, which, according to the manufacturer, should provide transparent, natural high-frequency sound. This tweeter works with two low-frequency speakers with diffusers made of carbon composite material with a diameter of 16.5 cm.

Speaker Box 15 DS2 is the flagship speaker system from Pro-Ject. The massive design of the speaker system guarantees the absence of unwanted vibrations. To increase stability, an internal cavity filled with sand is used, which also allows for better vibration absorption.

The 130 mm speaker in the Pro-Ject Sub Box 50 E model is pointing downwards, which ensures circular orientation and makes it easier to find the best place in terms of sound. The built-in amplifier of the novelty is designed for 50 watts of constant or 100 watts of peak power. The Sub Box 50 E covers the frequency range from 38 to 160 Hz.

Headphones in a classic design, leather-covered and adjustable lining, soft, enveloping leather ear pads.

The Pro-Ject Hear It-2 headphones, unlike the older model in the Hear It-1 catalog, have an overhead design. These stereophones are very light, do not lose the feeling of comfort when worn for a long time and are very well suited for use in conjunction with portable equipment.