Pro-Ject

Pro-Ject The Classic Reference Turntable looks beautiful and demonstrate natural “sound wall” listening expirience. The mofel based on The Classic EVO turntable and available with a hand-selected Vienna Philharmonic Orchestra Anniversary cartridge. The sound of this MC-cartridge (manufactured by Ortofon according Pro-Ject’s specifications) was tuned with members of the Vienna Philharmonics.

Austrian company Pro-Ject presented the largest model of the Pro-Ject Debut series of vinyl turntables, Pro-Ject Debut PRO S Balanced. The new product is equipped with a balanced output, which allows it to be used for connection to current Pro-Ject phono preamplifiers. The new player will replace the popular Pro-Ject Debut PRO model in the company's product range.

The A1.2 has a fully automatic start/stop and offers an 8.3” ultra-light-mass aluminium tonearm, built-in switchable phono preamp, and Pro-Ject MM E cartridge.

The Pro-Ject Automat A2 vinyl record player supports three rotation speeds – 33 ⅓, 45 and 78 rpm. Unlike the Automat A1 model, the rotation speed is no longer tied to the plate size. This allows you to independently determine the starting point of playback, that is, the point at which the needle descends onto the record.

The Pro-Ject Automat A2 vinyl record player supports three rotation speeds – 33 ⅓, 45 and 78 rpm. Unlike the Automat A1 model, the rotation speed is no longer tied to the plate size. This allows you to independently determine the starting point of playback, that is, the point at which the needle descends onto the record.

ProJect E1 is a turntable with a passionic drive and speeds of 33.3 and 45 rpm, electronically switchable. An 8.6-inch-long gimbal arm with an aluminum tube is mounted on the turntable.

The player can be mounted on a table or shelf using a special rear support or hung on the wall (brackets included). It works in an upright position.

The Pro-Ject VT-E BT is the world's first vertical wireless vinyl turntable that combines advanced design and easy setup. This record player is designed for those vinyl fans who would like to purchase an original design model that occupies a minimum of room space.

The case is made of a special composite material, and the 8.6-inch aluminum tube tonearm uses sapphire bearings. An Ortofon OM MM cartridge is installed on it, and all the necessary settings have already been made at the factory. The support disc is made of high-density fiberboard and coated with a special compound.

ProJect Primary E Phono is an audiophile player with a pre-tuned tonearm, and at the same time without compromises in sound. The lightweight aluminum tonearm is optimized for the Ortofon cartridge and reaches its full potential. The Primary E Phono model is equipped with a switchable output (phono/line), which allows you to connect the player to an external phono corrector or use the built-in and directly connect the player to the line input of other devices.

In addition to the vinyl player itself, three RCA inputs and a Bluetooth connection are available (the DAC is available, the manufacturer does not disclose its characteristics). Volume control is available both via the included remote control and via a 32-step potentiometer on the front panel of the device.

The Juke Box S2 has a built-in phono corrector, stereo power amplifier, and even a Bluetooth receiver for wireless music playback from mobile devices. Its Class D amplifiers develop a power of 50 watts per channel, which allows you to use almost any modern Hi-Fi acoustics in conjunction with the player.

The model is equipped with a pass–through drive and supports two speeds of rotation of the support disc - 33 1/3 and 45 rpm. The speed switch is electronic. The heavy support disc of the T1 EVO turntables is made of glass to maximize resonance reduction, and a felt mat is included. The turntable is supported by vibration-proof legs that reliably protect the turntable from external influences.

Pro-Ject T1 EVO BT is a stylish Bluetooth player made of high-quality materials with electronic gearshift, glass disc and Ortofon OM10 cartridge.

Pro-Ject T1 Phono SB (OM 5E) is a vinyl record player with a passionic drive and an Ortofon OM 5e MM cartridge. The model is distinguished by the presence of an electronic disc rotation speed switch (33 or 45 revolutions per minute), as well as a built-in phono corrector.

All the main advantages of the previous T2s in the "just" T2 player are obvious. First of all, it is a heavy glass disk that is spectacular in terms of design and effective in terms of audio. Its rotation speed (traditionally belt-driven) is electronically controlled. The 9-inch aluminum tonearm is equipped with a spring antiskating and a pre-installed Japanese Sumiko Rainier cartridge.

The model is almost an exact copy of the T2 W model, but without the wired functionality. The turntable received a 9-inch aluminum tonearm with a pre-installed Sumiko Rainier MM cartridge and a built-in phono corrector.

Pro-Ject T2 W (Rainier) is a vinyl record player. The T2 W intelligently enhances the highly regarded T1 formula by introducing innovative Wi-Fi streaming technology. This innovative feature provides uninterrupted streaming to a wide range of modern network audio devices, including HiFi streamers, network-connected home theater A/V receivers, and state-of-the-art streaming speakers.

The support disc of the Pro-Ject Debut EVO 2 is made of particularly durable aluminum and damped using TPE, which also eliminates resonances. The disc is driven by a passic by means of a subdisc from a silent motor with electronic speed control. The new product supports speeds of 33 1/3, 45 and 78 revolutions per minute.

A special feature of the Pro-Ject Debut PRO S Balanced player is the tonearm used here. This is an S-shaped tonearm, which is clear from the model name, made of aluminum and anodized in black. The length of the tonearm is 10 inches, which guarantees tracking the groove of the plate with minimal error.

Pro-Ject Debut PRO B is a vinyl record player. After the Debut Carbon EVO revolutionized the Debut series in 2020, the Debut PRO raised the bar even higher. The Debut PRO B now receives a new MM — Pick it PRO Balanced cartridge. The new Pick it PRO Balanced delivers the same lively and robust sound and is now also ready for use in our True Balanced Connection.

The Pro-Ject Debut PRO B turntable features a proprietary 8.6-inch Carbon-Aluminum tonearm with a lightweight and rigid carbon fiber tube and aluminum elements to achieve better damping and shielding, resulting in increased resistance to interference.

The Pro-Ject Debut PRO B turntable features a proprietary 8.6-inch Carbon-Aluminum tonearm with a lightweight and rigid carbon fiber tube and aluminum elements to achieve better damping and shielding, resulting in increased resistance to interference.

The entry-level RPM 1 Carbon model features a low-resonance chassis and an updated inverted bearing bearing with a precision ceramic ball. The drive motor is mechanically decoupled from the chassis and powered by a precision alternator with an external power supply, which improves the accuracy and stability of the disk rotation speed.

The RPM 3 Carbon turntable has the same design as the RPM 1 Carbon, it is equipped with the same tonearm (10 inches long), bearing and motor. However, if the support disc of the "first" model is made of fiberboard and complemented with a felt mat, then the "three-piece" disc has a multilayer structure and a vinyl surface that does not require the use of an additional mat.

The Pro-Ject RPM 5 Carbon (DC) turntable has a damped MDF chassis and is equipped with an acrylic support disc on a precision bearing. The player is equipped with a 9-inch EVO tonearm.

The Pro-Ject RPM 9 Carbon (DC) (Quintet Bronze) turntable has a combined chassis that provides almost complete damping of vibrations and resonances, and a massive aluminum support disc. A 9 cc Evolution tonearm with an Ortofon Quintet Blue pickup is pre-installed on this model.

The top model in the series, the Pro-Ject RPM 10 player has the most advanced design in its class today. The player is equipped with a high-end proprietary tonearm, a large-weight support disc, is mounted on a vibration-insulating platform and has an electronic disc rotation speed switch.

The Pro-Ject The Classic Evo player has an improved sub-chassis, which has become heavier and stiffer to reduce resonances. In addition, the aluminum support disc in the Pro-Ject The Classic Evo player is made with high precision from a special aluminum alloy and damped using TPE.

The player's motor is electronically controlled and supports speeds of 33, 45 and even 78 revolutions per minute. The player uses an external switching power supply, which can be replaced with an optional linear Pro-Ject Power Box RS2 Phono, if desired.

The Pro-Ject XA B player is equipped with an aluminum tonearm and a combined support disc. Together with the complete Pick It PRO Balanced cartridge and special vibration-proofing supports, the manufacturer managed to make the novelty come alive with "convincing, dynamic and detailed sound handwriting."

The Pro-Ject X1 B vinyl turntable opens up balanced connectivity options for music lovers at the most affordable price. The model is equipped with a balanced output, which allows you to get a minimum noise level and a wide dynamic range of sound. An MM pickup is pre-installed on the tonearm with a double-layer carbon and aluminum tube, and the position of the cartridge on the tonearm is adjusted at the factory, which simplifies the initial setup of the player.

The Pro-Ject X2 B is a vinyl record player, ready for balanced connection, thanks to the mini-XLR outputs. The player is equipped with a damped carbon fiber and aluminum tonearm, which guarantees sound accuracy.

The Pro-Ject 6PerspeX player, first of all, became famous for its unusual design. The table made of transparent acrylic, mounted on black anodized aluminum supports, and the frame, also black, look very stylish.

The X8 B offers a heavy, damped, weight-loaded disc, precision-chiseled from a solid aluminum block and perfectly balanced.

The basic Pro-Ject Xtension 9 player is conceived as one of the most convenient and easy-to-use turntables from the Austrian company, combining a sturdy chassis with a heavy aluminum disc mounted on an inverted bearing.

The Xtension 10 Evolution player is equipped with an MDF chassis, the special cavities of which are filled with ballast to increase the total weight, mounted on vibration-proof magnetic supports. The base disc of the turntable is made of a metal alloy, has a damping inner coating of sorbotane and an outer vinyl one, for optimal mechanical contact with the record. The Evolution 10 cc tonearm is 10 inches long and is suitable for mounting a wide variety of pickups due to its wide range of counterweights.

The top model in the Classic line, the Xtension 12 Evolution player is equipped with a 12-inch tonearm and has an impeccable design that ensures exceptionally accurate reproduction of analog recordings.

The Pro-ject Signature 10 is an uncompromisingly high–quality vinyl record player with the most sophisticated concepts. The chassis of the turntable is made of high-quality fiberboard and filled with metal granules, which add extra weight to the structure and suppress vibrations. The Pro-ject Signature 10 uses magnetic supports that physically detach the player from the surface on which it is mounted, which reduces the likelihood of resonance and makes it possible to fully enjoy clear and high-quality sound.

At the base of the Pro-Ject Signature 12.2 player is a massive MDF chassis, which is even heavier than its predecessor and now has rounded corners. There are no recesses in the player's body where resonances can occur that harm the sound. The chassis is supported by vibration-proofing legs, which can be adjusted from above to compensate for any unevenness of the turntable installation surface.

The Pro-Ject Elementary Phono USB Final Edition player is equipped with a built-in phono corrector. In addition, the novelty has a Delta-Sigma ADC, which digitizes an analog music signal from a record in PCM format with a resolution of 16 bits/48 kHz and outputs it to a computer running Windows or macOS via a USB-B port.

The Pro-Ject T1 turntable has a one-piece chassis with excellent anti-resonance characteristics mounted on damping supports. The 8 mm thick tempered glass disc is complemented by a subdisc mounted on a precision bearing made of steel and bronze. The player has a low-noise motor with high rotational speed stability.

The Debut RecordsMaster II comes with improvements such as increasing the size and weight of the disc to ensure even smoother rotation, and the overall sound quality is significantly improved.

The Pro-Ject X8 Special Edition player immediately attracts attention. The combination of black lacquer and metallic coating on the edges of the table gives the model a strict, refined look. The flagship Ortofon MC Quintet Black S cartridge is selected as the pickup head. The cartridge provides exceptionally accurate tracking with almost complete absence of resonances and stray vibrations, high detail and a surround sound stage.

The Pro-Ject Debut S is a belt–driven vinyl record player for advanced beginners that will delight amateur audiophiles.

The Pro-Ject AC/DC player is equipped with a new low-resonance tonearm, with an original design that repeats the elements of the bright AC/DC logo. This 8.6-inch acrylic tonearm is equipped with a spring antiskating system to ensure accurate tracking of the groove of the record. The player is supplied with a pre-installed Ortofon 2M Red pickup head with a movable magnet (MM).

The Dark Side Of The Moon Turntable is part of the Pro-Ject Artist Series of turntables and is equipped with a distinctive rainbow LED backlight. When the record rotates, the refracted light from the iconic album cover is recreated. There is also a dimming function, and the on/off lever of the player performs the function of a beam of white light.

A passionic turntable, the body of which is the logo of a group of crossed zippers. The table is made of fiberboard, while the top panel is made of a metal alloy. The subdisk is made of aluminum, and the main disk is completely made of glass. The kit includes an 8.6-inch S-shaped tonearm with an anodized aluminum tube, and a Pick it S2C MM head with an elliptical needle.

Structurally, the model is a classic turntable with a glass support disc, an S-shaped tonearm and anti-vibration supports. The model comes with an Ortofon MM cartridge called Sonar, which is a special version of the Concorde model. It is enclosed in a yellow case to complement the player's color scheme.

The player, called "George Harrison Essential III", was designed by Studio Number One, a California-based design agency, and uses a 2014 lithograph created for Harrison's heirs by artist Shepard Fairey. It will be released in an edition of 2,500 pieces.

The reference disk in the Pro-Ject Essential III (OM 10) model, Special Edition: Sgt. Pepper is made of selected MDF and has a uniform density for maximum stable rotation. The disc is supported by a stainless steel projection bearing and is driven by a reliable pass-through drive. The player is equipped with a mat mat, which provides additional damping of the record.

The Pro-Ject Rolling Stones Record player vinyl player has become another model of this company dedicated to the work of legendary rock musicians. This time, the ProJect's designers have designed a classic Debut III player in the style of Rolling Stones albums, which fans of this team will surely appreciate. The Pro-Ject Rolling Stones Recordplayer is available in black and white lacquer finishes, with a recognizable red tongue that has become a kind of "Rolling Stones" logo.

As befits a player dedicated to the "white album", all the structural elements of the novelty are painted white, including a nine-inch EVO tonearm and a pressure disc. Moreover, Ortofon has even released a special version of the 2M series MM head in a white case for this turntable.

The designs remained traditional for the original model – an 8.6-inch aluminum tonearm with sapphire bearings, a pre-installed Ortofon OM10 MM cartridge, and a pass-through drive. The kit also includes a dust cover and an interblock RCA Connect-IT cable.

The model based on the Debut Carbon Esprit SB player followed the George Harrison that appeared in January 2017. The first two will be followed by four more Beatles turntables. The design of the 1964 Beatles used original brochures, as well as tickets for the band's performances during the tour, which began in June 1964.

2Xperience SB «Sgt. Pepper" Limited Edition is the third of six collectible models of Pro-Ject players. The design of the model uses a print depicting a bass drum from the cover of this legendary album. There are only 1,000 copies of this exceptional player available in the world.

Vinyl record player, designer version based on the Primary model, 8.6“ tonearm, pass-through drive, acrylic disc, speed control 33; 45 rpm; Ortofon OM5e MM cartridge, dust cover, dimensions 420 x 112 x 330 mm, weight 4 kg.

The Pro-Ject Essential II DC player belongs to one of the company's budget lines and is a new version of the Essential model with an improved power supply.

The Pro-Ject PS00-Wave vinyl disc player by Parov Stelar is based on the proven Debut Carbon Esprit DC (2M Red) player and is available in limited quantities - 1000 pieces worldwide!

The Pro-Ject PS00-Frida vinyl disc player by Parov Stelar is based on the proven Debut Carbon Esprit DC (2M Red) player and is available in limited quantities - 1000 pieces worldwide!

The Pro-Ject Hard Rock Cafe vinyl player was created in collaboration with the Hard Rock Cafe. The player's table is covered with a unique painting from the Hard Rock Cafe, which makes the player not only an excellent turntable, but also an essential attribute for every Hard Rock connoisseur. The player comes with a pre-installed OM5e MM cartridge, from the pioneers of Ortofon vinyl. The player is available in a limited batch, which makes it more valuable for connoisseurs of high-quality sound and fans of heavy music.

The Pro-Ject E1.2 is a fully manual entry—level vinyl turntable designed for maximum ease of use and excellent analog sound without unnecessary features and “tricks”. The new version received a 730-gram aluminum die-cast support disc with integrated TPE damping to suppress vibrations and stabilize rotation, and the sub-disc is made of fiberglass-reinforced ABS for travel accuracy.

The Pro-Ject E1.2 is a simple and reliable vinyl turntable with a 730g anti—resonance cast aluminum support disc, an 8.6" aluminum tonearm, electronic gearshift and high-quality balance for clear sound.