Latest News – page 28

AdmiraVox AV 170 – High End speakers, designed in a closed case with an external crossover unit. Depending on the buyer's choice, the model can be designed in blue, light brown, green and gray shades of cases.

Aune has introduced a new headphone amplifier, the Aune S17 Pro EVO. The model is suitable for headphones with a nominal impedance of 32 to 600 Ohms and is equipped with balanced outputs.

YG Acoustics has introduced the reference floor-standing XX 3 loudspeakers in passive and active design. One or the other version is obtained by replacing the base of the speaker and adding external DSP module with full commutation set.

FiiO has introduced the S15 model - a digital music streamer (network player) and DAC with a high-quality analog section and a balanced XLR output. FiiO S15 can also be used as a preamplifier, which allows you to connect the player directly to a power amplifier or active loudspeakers.

The Vitus Audio MP-P201 Mk.III phono preamplifier uses the same discrete gain stage modules that were developed for the MP-L201, but for this phono preamplifier they have been optimized to achieve much lower noise levels. This is important to ensure high-quality musical performance even with cartridges with the lowest output voltage currently available on the market.

The Japanese company Air Tight has presented the latest revision of its famous amplifier Air Tight ATM-1 (the first device was released in 1986, and in 2006 a more advanced version ATM-1s was released). The amplifier uses a push-pull circuit on 1/12AT7 (ECC81), 2/6CG7 (6FQ7) and 4/EL34 tubes.

According to the company, the HSE Swiss Audio RL-7 is designed for a service life of at least 30 years. The new product uses only high-quality Swiss hand-made components. The RL-7 is based on the same zero-resistance class A operational amplifiers with an ultra-low noise level as the top-line ML-7 model. This guarantees the best possible audio characteristics and a minimum noise level.

Japanese manufacturer of High End electronics, Soulnote presented a stereo (2 x 120 W at 4 Ohms) power amplifier A-3core, which implements the concept of "dual mono". Each channel of amplification is powered by a separate toroidal 700 W transformer.

Following the Reference Preamp, the Swiss company Nagra has introduced the Nagra Reference AMP monoblock power amplifiers. The model replaces the well-known Nagra HD AMP and boasts a 25% larger power supply with 2000 VA transformers.

A new integrated amplifier from the British company Musical Fidelity Nu-Vista 600.2 scheduled for release since January 2025. The device is fully consistent with the brand's philosophy and uses a massive design with a dual mono configuration, a solid power supply, preamplifier and power-amp filtering and the use of Class-A tube stage consisting of nuvistor tubes.

German company Burmester calls its new Burmester 232 integrated amplifier “swiss army knife” for audio. The model offers high fashionability and optional offers a full set of streaming functions.

The new Core Audio DENPO DAC uses a single-chip configuration with a Japanese NOS ROHM BD34301 (MUS-IC) without FPGA. The model promises luxurious and natural sound - every element in the signal chain has been given great attention.

The Grimm Audio PW1 phono preamplifier stands out with its minimalist circuitry, aimed at preserving the integrity of vinyl playback. The PW1 minimizes the number of components in the signal path, allowing the music to flow with minimal interference. Each gain stage uses a single active component, while a carefully selected op-amp serves as a buffer to maintain signal quality. The “PW” stands for Phono Wizard, so the PW1 features a wide range of input adjustment options to suit the characteristics of the cartridge.

Nagry has introduced a new Reference Preamp, of the top series. The flagship model of the famous High End equipment manufacturer promises incredible sound quality.

ModalAkustik has introduced new two-way acoustic systems ModalAkustik MusikBoxx without a crossover (you can use two-channel amplification with a low-level crossover based on DSP, which can be implemented, for example, in a sound processor, or use a proprietary external high-level crossover MusikCrss, made on Mundorf and WBT components).

T+A Pulsar S 130 – new slim acoustic systems in the model range of the famous German company. The model is designed according to the brand design with “symmetrical directivity”, which helps to minimize reflections in the listening room. The forward-facing bass reflex port also facilitates installation.

ONEIROS acoustic systems are an example of a combination of engineering excellence and extraordinary approaches to audio. The speaker bodies are made of genuine monocoque 100% carbon fibre composite – exactly the same as that used to produce an F1 car.

Wave Kinetics has unveiled a black version of its iconic Wave Kinetics NVS Reference turntable. The release of the model is dedicated to the memory of the company's founder and co-designer Jonathan Tinn. The turntable accumulates the latest developments in the audio to achieve the highest sound quality.

The Pro-Ject presented a new vinyl turntable, PRO S Balanced. The body of the Pro-Ject Debut PRO S Balanced turntable is made of MDF and has hand-painting in eight layers. The turntable features a belt drive with an aluminum subplatter, which is designed to guarantee increased speed accuracy. The main platter is also made of aluminum - first using a die-casting process and then with the highest precision using a CNC machine.

Homogenix Gold is a very interesting MC cartridge for vinyl turntables. The highlight of the system is the body made of year 1512 fir wood, as the company claims, a real treasure, akin to the wood from which Stradivarius violins were made. Homogenix Gold’s incredible sound reproduction capabilities are also achieved by using High End materials in other parts of the cartridge – a sapphire cantilever, a diamond stylus with Micro Ridge sharpening and coils wound with pure 7N copper.