SMSL PL200T – CD transport with USB DSD streaming support
08.03.2025 05:37 | ~1 minute read
SMSL presented the SMSL PL200T CD transport – the highlight of the model was the proprietary SMSL PASS Servo system, which ensures very accurate reading of information from optical media. The SMSL PL200T also has the ability to play MQA-CDs and a very interesting function of working as a digital transport - the device can be used as a digital interface with a USB-C input, supporting digital streams in PCM format with a resolution of up to 32 bit/768 kHz and in DSD format up to DSD512.
Another feature of the SMSL PL200T transport is the ability to connect an external clock generator to it. The transport can work both as input and output, and supports a clock frequency of 44.1 kHz and a standard clock frequency of 10 MHz.
The SMSL PL200T features gold-plated connectors and a tempered glass IPS display. The SMSL PL200T is available for a suggested retail price of $499.
Specifications
This product is in the Hi-Fi and High End Electronics and Acoustics database
CD / SACD players and transports — SMSL PL200T
Model name
PL200T
Transport
Yes
Player
N/A
SACD support
Yes
Engine
N/A
Frequency response low +/- 3dB (for CD) (Hz)
N/A
Frequency response high +/- 3dB (for CD) (Hz)
N/A
Frequency response low +/- 3dB (for SACD) (Hz)
N/A
Frequency response high +/- 3dB (for SACD) (Hz)
N/A
Gain (dBu)
N/A
Output Level (balanced) (V)
N/A
Output Level (single-ended) (V)
N/A
Input Impedance (balanced) (Ω)
75
Input Impedance (single-ended) (Ω)
50
Output Impedance (balanced) (Ω)
N/A
Output Impedance (single-ended) (Ω)
N/A
Dynamic range (for CD) (dB)
N/A
Dynamic range (for SACD) (dB)
N/A
Signal to Noise Ratio (for CD) (dB)
N/A
Signal to Noise Ratio (for SACD) (dB)
N/A
Total Harmonic Distortion + Noise (for CD) (%)
N/A
Total Harmonic Distortion + Noise (for SACD) (%)
N/A
Dimensions (mm)
200 x 42 x 175
Weight (kg)
1.62
Official link
More content
FiiO K15 – an Inexpensive DAC with a Headphone Amplifier
FiiO plans to release a new DAC with a headphone amplifier and a preamplifier FiiO K15. Detailed performance characteristics of the new product will be announced after the presentation at the CanJam exhibition in London - but it is already known that the model will go on sale in August 2025 for an affordable 599 euros. Of course, FiiO K15 supports Hi-Res up to PCM 32/768 and DSD512.
D&A Alpha PRO – Digital-to-Analog Converter with Zero-Jitter Clock Architecture
D&A (Digi & Aesth) has introduced a relatively inexpensive ($699) digital-to-analog converter with headphone amplifier D&A Alpha PRO. Alpha Pro was developed on the basis of the flagship ESS Technology ES9039MSPRO chip, it supports signals up to PCM 32/768, DSD512 and hardware decodes MQA.
Cyrus 40 PPA – the Latest Phonostage is Now Available
Cyrus Audio has officially unveiled the Cyrus 40 PPA phono preamplifier – the model has been previously demonstrated at exhibitions and is now available for sale at a suggested retail price of €2,499 or $2,899.
Cambridge Audio EVO 150 SE – Meet the Updated Amplifier
Cambridge Audio has released an improved version of its famous network integrated amplifier – this month the Cambridge Audio EVO 150 SE will go on sale. The device uses Class D amplification based on NCOREx “Tuned by Cambridge” modules and delivers 2 x 150 watts to 8 ohm speakers. The amplifier is equipped with a built-in digital-to-analog converter based on the advanced ESS Technology Sabre ES9018K2M chip.
Bluesound Powernode – Now GaN-Based
Bluesound has introduced a new generation of the Bluesound Powernode network integrated amplifier. The model now uses gallium nitride (GaN) amplification technology and is equipped with three amplification channels for the center speaker in home theater mode. At the same time, the Bluesound Powernode can operate in traditional stereo mode – then the power will be 2 x 100 watts, and when switching to three-channel mode – 80 watts.
