Bryston

The continuous RMS power of this stereo amplifier per channel at a resistance of 8 ohms is 225 watts, at a resistance of 4 ohms — 450 watts.

The Bryston BD-325 is a Class D multichannel power amplifier. Dynamic power (100 ms) available for all channels: 4,500 watts.

The Bryston BD-325 is a Class D multichannel power amplifier. Dynamic power (100 ms) available for all channels: 4,500 watts.

The Bryston 28B3 monoblock amplifiers are among the best sounding models at any output power. These amplifiers take full control of your speakers and make them work with maximum efficiency.

The new generation of amplifiers has noticeably improved protection against various interference, redesigned power supply, now StandBy consumption is less than 500 MW, and the design has been modernized (a decorative overlay has appeared in the center of the front panel, and additional chamfers have been made on the handles). The remaining electrical characteristics and switching capabilities remained at the highest level of Bryston. Like all Bryston devices, the 14 B3 amplifier can be available in both black and silver colors, as well as in a 17- or 19-inch front panel design.

The amplifier demonstrates all its strengths: first of all, its modular design, in which each channel is autonomous (it has its own audio transmission scheme, independent connectors and a power supply unit), as before, the 9B3 amplifier modules are removable. This means that the 9B3 can be configured with fewer channels if its application area requires it, or it can be ordered immediately in a 3-, 4- or 5-channel version. As a result of the patented technology developed for the Bryston cubic series of amplifiers in collaboration with Dr. Salomi, intermodulation distortion decreased to 0.006 percent and total harmonic distortion to 0.005 percent at maximum power, which, as already mentioned, nevertheless increased significantly for each channel — up to 200 watts at 8 ohms load.

The Bryston 7B3 mono amplifier is really special. Although it doesn't differ much from each other, it's a big step forward compared to the venerable 4B3. The power supply for the 7B3 amplifier is built around a transformer with a special winding, which is significantly more efficient than a conventional one. With twice the available power, it can manage all but the toughest loads to near-real levels. But even at the level of a whisper, it reveals details and nuances in your recordings that you didn't even know about until now.

This product has been continuously produced (although often improved) since 1978. This esteemed amplifier is currently in its sixth generation, and it has never been better. Now with 300 watts per channel at 8 ohms (and over 500 watts at 4 ohms), this true dual mono amplifier is powerful enough for almost any speaker, but its price remains affordable. The degree of clarity, power, nuance, and outright truthfulness of this amplifier is staggering. If you've always wanted one, maybe now is the right time.

As a result of the patented technology developed for the Bryston cubic series of amplifiers in collaboration with Dr. Salomay, intermodulation distortion decreased to 0.006 percent and total harmonic distortion to 0.005 percent at maximum power, which nevertheless increased significantly for each channel to 200 watts at 8 ohms load. Bryston's 20-year warranty remains the same.

The Bryston Bi-200 integrated amplifier is essentially a combination of a BP-19 preamp and a 3B Cubed power amplifier made in one package. This saves space and also allows you to eliminate the interblock cables between the preamplifier and the power amplifier.

The Bryston BHA-1 is a long—awaited addition to the ranks of truly expensive headphone amplifiers. The traditionally professional, uncompromising approach and extensive amplifier manufacturing experience are fully realized in this model.

The Bryston BR-20 preamp is designed in a fully balanced concept. Independent power supply of the analog and digital parts is implemented here. The digital subsystem includes a network streamer and a DAC, and the new product is ready to work with both network storage on a home network and popular streaming lossless services such as Tidal and Qobuz. The DAC unit can process PCM streams with parameters up to 24 bits /384 kHz, as well as DSD up to DSD256.

The Bryston BP-19 uses years of research and development, as well as many design innovations that were achieved during the development of the award-winning BR-20 preamp. The BP-19 reproduces music effortlessly because it uses only the best premium hand-selected components, including a large toroidal power transformer. The optimized discrete operational amplifier delivers a staggeringly low THD+N level at or below 0.0006%.

The Bryston BDA-3 digital-to-analog converter is packed to the brim with various functions, but none of them is superfluous. Let's start with the main differences between BDA-2 and BDA-3 – improved PCM playback capabilities and full DSD support. While BDA-2 supported PCM up to 24/192, BDA-3 supports PCM up to 32/384. Moreover, BDA-3 supports DSD up to DSD256. ((More information about my experience playing DSD in different resolutions is provided below).

The DAC has a built-in streamer and can work both over the UPnP network and via the USB port. The digital connection of the streamer to the converter section inside the device is made via the i2S bus. The Bryston BDA-3.14 also has a digital volume control module on board, so you can dispense with a preamp if you wish.

The Bryston BCD-3 is a high-quality CD player with a 17-inch control panel in classic black. The digital audio read from the CD is sent to the DAC chipset, where it is converted to an analog signal. The output stage is built using fully balanced discrete Class A operational amplifiers developed by Bryston.

The Bryston BP-2 uses low-distortion broadband amplification. There are two phono corrector options available: MM only or universal MM/MC. The BP-2 phono corrector is ideal for most cartridges sold. Both versions include a switchable capacitive load for use with movable magnet cartridges.

Made in the "micro" form factor (like the BUC-1 and BOT-1), the device works with MM/MC type pickups (61/72 dB). An external power supply (optional full-size PS-2 or new PS3 DC) serves not only to keep the device compact, but also to minimize possible interference from high-current circuits. The MM/MC modification is recommended to be used with the TF-2 boost transformer.

This device has the same housing as the BP-2 or BOT-1 and BUC-1 phono correctors and increases the output voltage to 3-6 mV, which will be enough for most MM-type phono correctors. The Bryston TF-2 is available in two versions.: with a gain of 20 and 30 dB. To select the correct version, we recommend following the following tips: if the output voltage of your pickup is between 0.1 and 0.2 mV, the version with a gain of 30 dB is suitable for you. From 0.4 to 0.5, use the version with a gain of 20 dB.

This device has the same housing as the BP-2 or BOT-1 and BUC-1 phono correctors and increases the output voltage to 3-6 mV, which will be enough for most MM-type phono correctors. The Bryston TF-2 is available in two versions.: with a gain of 20 and 30 dB. To select the correct version, we recommend following the following tips: if the output voltage of your pickup is between 0.1 and 0.2 mV, the version with a gain of 30 dB is suitable for you. From 0.4 to 0.5, use the version with a gain of 20 dB.

Most speakers approach this quality by using single or coaxial speakers, or in most cases, 2- or 3-way speakers grouped as close together as possible. The sound from the point source speaker expands from the speaker like an ever-increasing sphere. Unlike a linear array system or an omnidirectional speaker, a point source speaker emits sound in a spherical shape.

The Bryston Compact T10 has a maximum RMS power of 500 watts and a crossover section frequency of 250 Hz / 2000 Hz;

The Bryston Mini T speakers are the result of decades of research in acoustics, electronics, sound reinforcement and modern materials and technologies, they were created with the sole purpose of recreating your recordings with stunning realism.

The Bryston Compact T10 has a maximum RMS power of 500 watts and a crossover section frequency of 250 Hz / 2000 Hz;

The Bryston MODEL Trim floorstanding loudspeakers are the junior floor model of Bryston speakers. Her lot is the voicing of rooms ranging from 20 to 50 square meters.m.

Each Bryston Middle T speaker has four speakers, all metal. The tweeter is domed, made of titanium, the rest of the emitters are conical, with diffusers made of magnesium and aluminum alloy with ceramic coating for greater rigidity.

The Bryston Model T10 speaker system has been designed to deliver maximum quality at an affordable price while offering superior design. New driver designs, case vibration analysis, crossover refinement, and anechoic chamber testing have all led to the creation of an amazing product.

The Brighton model has mechanical and acoustic sound, accommodates the appearance and the possibility of redistributing resources from three countries.

Each Middle T speaker has four speakers, all metal. The tweeter is domed, made of titanium, the rest of the emitters are conical, with diffusers made of magnesium and aluminum alloy with ceramic coating for greater rigidity.

The Mini T really looks more like the characteristics of excellent floor speakers. The bass is incredible, the dynamics are huge, the visualization is unfathomable, and everything is clear as a bell. Mini T is a frequent star of our hi-fi shows and never ceases to amaze both the audience and us! As a direct descendant of the Model T, you should expect nothing less.

A large active subwoofer capable of producing 600 watts of output power.

A large active subwoofer with a built-in power amplifier that can output 600 watts of power.

The Model A1 is the top model in the mid-range of Bryston speakers. The dense natural sound inherent in the old-school Hi–Fi is the highlight of these speakers. The recommended amplifier is 14B-SST2.

If you are the lucky owner of a living room of 40 square meters and a stereo system based on Bryston components, then you can now treat yourself to a new floor pair. The dense natural sound inherent in the old-school Hi–Fi is the highlight of these speakers. The recommended amplifier is 4B-SST2.

The Model A3 is the youngest floor lamp in the series. The dense natural sound inherent in the old-school Hi–Fi is the highlight of these speakers. The recommended amplifier is 4B-SST2.

The Bryston Mini A Bookshelf is an excellent shelf speaker system that provides the listener with extremely high sound quality. The purity of the timbres, realistic sound reproduction, wide stereo image and the absence of any distortion, this is not a complete list of the advantages of this acoustics.