Emotiva

The Emotiva Airmotiv XB1 is a compact two-way shelf speakers with a 22x32mm Airmotiv ribbon tweeter and a 4-inch braided fiber mid- and low-frequency speaker, equipped with an audiophile crossover and a satin-coated HDF case.

The Airmotiv XT3 is an excellent example of a modern three-way tower-type speaker system, equipped with a 32 mm corrugated ribbon tweeter, two 5.25-inch midrange emitters and three 8-inch woofers. A carefully thought-out crossover circuit with high-quality film capacitors and induction coils without a steel core allows you to achieve unsurpassed sound quality.

The Airmotiv XT2 is a remarkable example of tower design with a 32 mm ribbon corrugated Airmotiv tweeter, a 5.25—inch midrange radiator with a braided fiberglass diffuser and three 6-inch woofers. A carefully thought-out crossover circuit with high-quality film capacitors and induction coils guarantees an audiophile-level sound.

Emotiva Airmotiv XB2 is a versatile two-way shelf speaker, ideal for placing on bookshelves or racks. Equipped with a 25 x 32 mm corrugated ribbon tweeter and a 6-inch woofer with a woven synthetic fiber diffuser, it is an ideal choice for use in a high-quality stereo system.

The Airmotiv XT1 is a powerful three-way tower-type floor speaker that is ideal for both beginners and discerning music lovers. Equipped with an advanced 25 x 32 mm ribbon tweeter for crystal clear treble reproduction, a 4.5-inch braided synthetic fiber midrange radiator for clear vocals, and three 5.25-inch woofers for deep and powerful bass.

The Airmotiv XS15 is a powerful premium subwoofer with a massive 15—inch direct-emitting woofer and a 600-watt audiophile-grade A/B amplifier, allowing you to convincingly and brilliantly expand the bass response of your audio system to reproduce several critical bass octaves thoroughly and subtly.

The Emotiva Airmotiv XS12 is a powerful premium subwoofer with a powerful 12-inch (300mm) woofer and a 500W audiophile-quality A/B class amplifier to reproduce the lowest octaves of your favorite songs and movie soundtracks with sophistication and authority.

The Emotiva Airmotiv XS10 is a premium full—featured active subwoofer that has been designed to deliver great sound from both movie soundtracks and audiophile-quality music content. The Airmotiv XS10 is the perfect way to extend the bass response of your audio system to cover the last few critical bass octaves in a convincing and sophisticated way.

The Emotiva Airmotiv XS8 is a compact premium active subwoofer with an 8-inch long-range speaker and a 250W RMS class AB amplifier designed for high-quality bass reproduction in music and movies; the frequency range is from 29 to 200 Hz, there are volume, cutoff frequency, phase and bass gain controls.

The BasX A1 is a single—channel amplifier ideal for delivering dedicated power to the most important speakers in your system. Use A1 to build a high-performance stereo system or to provide the cleanest channel possible for each speaker.

The XPA-3 Gen3 is a three-channel version of the latest generation of high-quality modular amplifiers. First of all, the XPA-3 Gen3 offers excellent technical characteristics, exceptionally accurate and dynamic reproduction of all types of music, which makes it an ideal choice for voicing the three most important front channels of great-sounding home theater systems, or high-end surround sound systems.

The XPA-5 GEN3 is a five—channel version of the latest generation of Emotiva modular high-end amplifiers. The XPA-5 GEN3 offers superior technical performance and exceptionally accurate and dynamic playback of all types of music, making it an ideal choice for connecting front channels and speakers to the center channel and rear channels of a home theater or surround sound music system.

The XPA-5 GEN3 is a five—channel version of the latest generation of Emotiva modular high-end amplifiers. The XPA-5 GEN3 offers superior technical performance and exceptionally accurate and dynamic playback of all types of music, making it an ideal choice for connecting front channels and speakers to the center channel and rear channels of a home theater or surround sound music system.

The BasX A4 is a four—channel power amplifier that outputs 100 watts/channel at 8 ohms and 130 watts/channel at 4 ohms, all channels are engaged, with a nominal harmonic distortion + noise ratio of <0.02% and a signal-to-noise ratio weighted on the A scale.

The BasX TA1 model, offered at a surprisingly affordable price, allows you to fully experience the excellent sound quality and extensive functionality provided by the use of separate components. The TA1 combines a stereo preamp and a high-quality amplifier in one package.

The BasX A2 is a two-channel power amplifier of 160 W/channel at 8 ohms and 250 W/channel at 4 ohms with a nominal value of KNI+W < 0.02% and a signal-to-noise ratio of 112 dB on the A scale. It has a massive built-in power supply, a high-quality class A/B amplification circuit, fault protection that does not affect the signal, as well as trigger input and output.

The XPA-7 GEN3 is a seven—channel version of the latest generation of high-end modular amplifiers. The XPA-7 GEN3 offers excellent technical performance, and exceptionally accurate and dynamic playback of all types of music, making it an ideal choice for connecting a 7.1 home theater or surround sound music system.

The BasX A3 is equipped with a powerful linear power supply, high-quality Class A/B amplification, transparent fault protection, and trigger input and output.

The BasX A3 is equipped with a powerful linear power supply, high-quality Class A/B amplification, transparent fault protection, and trigger input and output.

Equipped with three Differential Reference™ amplifier modules, the XPA-DR3 is ideal for maximizing the efficiency of a three-front channel system in a powerful surround sound system or home theater. The XPA-DR3 outputs 550 watts RMS at 8 ohms and 800 watts RMS at 4 ohms with a load on all three channels with a voltage of less than 0.1%.

The XPA-DR2 model, equipped with two Differential Reference™ amplifier modules, is ideal for maximizing the efficiency of the stereo system, or critical left and right front channels as part of a powerful spatial sound system or home theater. The XPA-DR2 outputs 550 Watts RMS at 8 ohms and 800 Watts RMS at 4 ohms with a load on both channels of less than 0.1%.

The XPA-11 GEN3 is an ideal amplifier for a surround sound system that uses three large front speakers (left, right, and center) and eight small surround speakers or ceiling speakers - and this amplifier is ideal for implementing Dolby Atmos 7.1.4 or 5.1.6. The XPA–11 GEN3 is also an excellent choice. for home theater systems 7.1 or 7.2, and for voicing two pairs of speakers in other areas.

The Emotiva XPA HC-1 amplifier is a monoblock power amplifier built on the basis of XPA Gen3 modules. The amplifier is powered by a powerful SMPS power supply. If you like our XPA Gen3 series amplifiers, but you need a compact monoblock, then HC-1 is the best choice!

Emotiva BasX A6 is a six–channel power amplifier providing 90 watts/channel at 8 ohms and 125 watts/channel at 4 ohms, all channels are active, with rated THD+N < 0.02% and A-weighted signal/noise at 112 dB.

Emotiva BasX TA2 allows you to experience the flexibility and superior sound quality that you can achieve with individual audiophile components at a surprisingly affordable price. The TA2 combines a high-quality stereo preamp and a high-quality stereo amplifier in one package.

The XPA-9 GEN3 is an ideal amplifier for a surround sound system that uses five large speakers, or three large front speakers (left, right and center) and six small surround speakers or ceiling speakers – and this amplifier is ideal for implementing DolbyAtmos 5.1.4 or 7.1.2. XPA-9 GEN3 It will also be an excellent choice for home theater 7.1 or 7.2 systems, and for second-zone speaker dubbing.

The XPA-DR1 is a mono power amplifier with a single Differential Reference amplifier module in a monoblock configuration with its own 3 kW switching power supply. The XPA-DR1 delivers tremendous power, excellent dynamics, incredible resolution, and absolute control of all parameters. If you are looking for the best sound quality, with an inexhaustible supply of power and complete absence of background noise, this amplifier is what you need.

The BasX A1 is a single—channel amplifier ideal for delivering dedicated power to the most important speakers in your system. Use A1 to build a high-performance stereo system or to provide the cleanest channel possible for each speaker.

The XPA-4 GEN3 provides 260 x 4 Watts RMS at 8 ohms on four channels (and 300 Watts RMS at 8 ohms or 490 Watts RMS at 4 ohms on two channels) and the modular design allows you to add 3 additional modules whenever you need it.

The XPA-6 GEN3 is a six—channel version of the latest generation of high-end modular amplifiers. The XPA-6 GEN3 offers excellent technical performance, and exceptionally accurate and dynamic playback of all types of music, making it an ideal choice for connecting a 5.1 home theater or surround sound music system. The XPA-6 GEN3 provides 225 x 6 Watts RMS at 8 ohms on five channels (and 300 watts RMS at 8 ohms or 490 watts RMS at 4 ohms on two channels).

The BasX A1 is a single—channel amplifier ideal for delivering dedicated power to the most important speakers in your system. Use A1 to build a high-performance stereo system or to provide the cleanest channel possible for each speaker.

Emotiva BasX A2L+ is a dual-channel Class A/B power amplifier delivering 50 watts per channel at 8 ohms and 90 watts per channel at 4 ohms, with very low distortion (<0.1%) and high signal-to-noise ratio (112 dB).

The Emotiva XPA-1 Gen3 is a modular monoblock power amplifier capable of delivering 600 watts at 8 ohms and 1000 watts at 4 ohms in Class AB, making it an excellent choice for high-end stereos or home theaters.

Emotiva BasX PT1 is a preamp with a DAC, more and more manufacturers are following this path with their amplifiers and preamps. It also has a built-in stereo tuner, which is usually the preserve of AV amps and American audio enthusiasts. Nevertheless, here it is, the BasX PTI preamp/DAC/tuner, which includes a high-resolution asynchronous USB input, an integrated Bluetooth receiver with aptX support, and an MM/MC phono corrector.

Emotiva BasX PT2 is a high-quality stereo preamp that includes a high-quality stereo FM tuner, a large number of inputs for analog line-level sources, an integrated DAC with a large number of digital inputs for all your digital audio sources, including a high-resolution asynchronous USB input and an integrated Bluetooth receiver with aptX HD support, and It is also a high-performance phono corrector that supports cartridges with a movable magnet and a movable coil.

The Emotiva XDA-3 DAC is a differential reference DAC/preamp. It is a two-channel digital-to-analog converter (DAC) of audiophile quality with digital and analog inputs. It can be used as a DAC, or as a control center or preamp.

Emotiva PH-1 is a compact phono corrector with a metal body and gold-plated connectors, supporting MM and MC cartridges, providing accurate RIAA correction (±0.5 dB), low noise and distortion, as well as amplification of 40 dB for MM and 60 dB for MC.

The BasX MR1 AV receiver combines a high-performance 13.2-channel surround sound processor and an 11-channel audiophile-level amplifier in one package. The MR1 processor section supports 4k UHD video, including HDR and Dolby Vision, the enhanced ARC standard (eARC). as well as the latest immersive ambient sound formats Dolby Atmos and DTS:XTM. The MR1 is equipped with six HDMI 2.0b video inputs, all of which support the 4k UHD extended Dynamic Range (HDR) video format, as well as the new audio return Channel (eARC) standard. The MR1 is equipped with several types of analog and digital audio inputs and an integrated Bluetooth receiver with aptX support.

The device is equipped with a 13.2 multichannel output from a preamp, which allows you to use the Emotiva BasX MR1L as an AV processor by adding external power amplifiers to the system. Moreover, you can determine for yourself to what extent to use the receiver's built-in amplifiers and whether to use them at all, which provides a wide field for maneuver when configuring a home theater system.