Hifiverse
Audio

ONEIROS – speakers made according to the principles of Formula 1 supercars

18.12.2024 07:25 | ~1 minute read

ONEIROS acoustic systems are an example of a combination of engineering excellence and extraordinary approaches to audio. The speaker bodies are made of genuine monocoque 100% carbon fibre composite – exactly the same as that used to produce an F1 car.

ONEIROS loudspeakes. Image source (c) ONEIROS
ONEIROS loudspeakes. Image source (c) ONEIROS

The drivers are no less interesting. The bass is provided by 2 x 10” proprietary multi-layer inverted parabolic Twaron graphene nano-composite woofers with 3” voice coil and dual suspension. Excursion reaches 50 mm, and the magnetic system alone weighs 8.2 kg. The midrange frequencies are voiced by a pair of 3” proprietary Dyneema graphene composite domes with single-layer ribbon CCAW underhung voice coil drivers, and the high frequencies are handled by a 1” CVD diamond dome tweeter.

The signal path uses only High End components – capacitors Mundorf MCap SUPREME EVO SilverGold.Oil, inductors Mundorf MCoil CF 70μm copper foil and resistors Mundorf MResist ultra HS 30W. Internal wiring is made of 651 x 0.07 mm OFC copper wire, TPE CL-free insulation.

Specifications

This product is in the Hi-Fi and High End Electronics and Acoustics database

Floorstanding loudspeakers — ONEIROS ONEIROS

  • Model name

    ONEIROS

  • Frequency Response low +/- 3dB (Hz)

    20

  • Frequency Response high +/- 3dB (Hz)

    35000

  • Sensitivity (dB at 1 W/1m)

    90

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    100 - 750

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    1610 x 575 x 760

  • Weight (kg)

    140

  • Official link

More content

  • Canor Virtus A3 – a Hybrid Integrated

    Canor Virtus A3 – a Hybrid Integrated "Dual Mono" Amplifier

    Canor Audio has introduced the hybrid integrated amplifier Canor Virtus A3. The model uses the "dual mono" topology, a vacuum tube preamplifier on a pair of E88CC tubes, is equipped with a built-in digital-to-analog converter, a phono preamplifier and has a 1.3-inch touch LCD screen.

  • Nagaoka MP-700 – a Special Type of Moving Permalloy Cartridge

    Nagaoka MP-700 – a Special Type of Moving Permalloy Cartridge

    The new Nagaoka MP-700 cartridge tops the Moving Permalloy (MP) series and will be available in the standard MP-700 and premium MP-700H versions. Compared to conventional moving magnet (MM) cartridges, the Moving Permalloy (MP) variant features a lighter permalloy magnet attached to the cantilever.

  • Sennheiser ACCENTUM Open — New Affordable TWS Headphones from a Famous Company

    Sennheiser ACCENTUM Open — New Affordable TWS Headphones from a Famous Company

    Sennheiser has introduced the Sennheiser ACCENTUM Open TWS headphones – the model, designed in a stylish compact design, promises, according to the manufacturer, exceptional comfort during use and a secure fit.

  • Ranieri Audio Labs Varieta – a Preamplifier for Tube-Rolling

    Ranieri Audio Labs Varieta – a Preamplifier for Tube-Rolling

    The Ranieri Audio Labs Varieta preamplifier has been released – the model uses directly heated triodes and allows for a wide range of tubes (300B, 2A3/6A3, 12A/201A, 26, 30, 31, 45, 50, 71A, 801A/10Y, 275A/252A, 245 and 842/VT52 will do). Simply ideal for those wishing to experiment with tube rolling.

  • Accuphase C-57 — Balanced Phonostage with Dual Mono Topology

    Accuphase C-57 — Balanced Phonostage with Dual Mono Topology

    Accuphase has introduced the Accuphase C-57 phono preamplifier, based on a fully balanced circuit design from output to input with dual mono topology. The Accuphase C-57 also uses a two-stage solution: the first stage is the output stage to ensure matching with MM and MC cartridges, the second stage is the correction amplifier itself.

hifiverse