Cary Audio

The dual mono design also allows for a fully balanced differential circuit with 8 channels of digital-to-analog conversion (4-channel AK4499EQ chips). The DMS-800PV uses two DSP (digital signal processing) service circuits, a superstable Crystek clock generator, 14 stabilized power lines for digital and utility circuits, two stabilized power lines for analog output stages, and many other large and small parts that work for sound quality.

DACs with an R2R current output, which use simple current division on resistors with a sequential resistance ratio of 1:2:4:8 and so on, have been known since the birth of digital audio.

The DMS-650 is a player with a new design, where dynamic elements are located on the right side of the front panel. The output stage is based on a high-resolution digital audio circuit. The basis of the scheme was the AKM AK4497EQ DAC. Users will be able to choose a player in black or silver trim.

The Cary Audio SI-300.2d is a Class AB amplifier with 300 watts per channel, equipped with analog RCA and XLR inputs, as well as an analog preamp. The digital part uses the same chip used in Cary Audio's top digital products, the topology of the digital circuit is specially optimized, the digital-to-analog conversion process is configured, and Cary TruBit's proprietary technology is used. Upsampling.

The model can play files in 32-bit / 384 kHz PCM and DSD 64, 128, and 256 formats. The device boasts a CSR aptX Bluetooth adapter, Toslink, SPDIF, and AES/EBU digital inputs, XLR and RCA outputs, TruBit proprietary oversampling technology, and a DiO vacuum tube.

The Cary Audio SLI-100 has a headphone output with a specially optimized circuit - the signal to the headsets comes directly from the output transformers.

The Cary Audio Design CAD 300 SEI integrated stereo amplifier is made according to a classic single-stroke circuit without feedback. The amplifier's output is powered by 300B lamps, highly respected by audiophiles around the world for their rich and dynamic sound over a wide frequency range.

The Cary Audio Design CAD 300 SEI integrated stereo amplifier is made according to a classic single-stroke circuit without feedback. The amplifier's output is powered by 300B lamps, highly respected by audiophiles around the world for their rich and dynamic sound over a wide frequency range.

The corrector is built on dual 6SL7 triodes, passive correction is carried out using a chain of resistors between two amplification stages. There are separate inputs for heads with movable magnets and movable coils on the back wall, and a wide range of resistance options will allow you to match almost any cartridge with the Cary Audio VT-500.

The Cary Audio Design SLP 98L preamp has a classic design for the company's technology and is manufactured using selected components. The model with the L index is equipped with only line inputs, while the preamp with the P index in the name also has an input for connecting the pickup of a vinyl disc player.

The Cary Audio Design SLP 98L preamp has a classic design for the company's technology and is manufactured using selected components. The model with the L index is equipped with only line inputs, while the preamp with the P index in the name also has an input for connecting the pickup of a vinyl disc player.

The Cary Audio CAD 120S is a modern tube power amplifier. The amplifier design is equipped with four 6SN7 lamps and eight KT88 lamps. All lamps are located on the outside of the case. The operating frequencies range from 17 to 25,000 Hz.

The Cary Audio CAD 120S is a modern tube power amplifier. The amplifier design is equipped with four 6SN7 lamps and eight KT88 lamps. All lamps are located on the outside of the case. The operating frequencies range from 17 to 25,000 Hz.

The input stage is made on a pair of 6SN7 dual triodes: first, the signal passes through the input stage on a dual triode with resistor connections operating in parallel mode, and then enters the anode circuit built on the second lamp.

The Cary CAD 211 is a top—of-the-line tube Hi-End power amplifier. Built using zero feedback technology, the CAD 211 provides 110 watts of output in Class A/B mode and 70 watts in Class A mode.

The Cary SA-200.2 ES is a stereo amplifier with a power of 200 watts per channel at 8 ohms or 350 watts at 4 ohms. There are both unbalanced and balanced connectors on the back of the SA-200.2 ES.

This device is a monoblock with 500 watts at 8 ohms (1000 watts at 4 ohms). Like the SA-200.2 ES stereo amplifier, the monoblock model has balanced and unbalanced inputs.

The Cary Audio DMS-300A is a Class AB integrated amplifier that delivers 75W of power to each of its two channels when driven into a load with a nominal impedance of 8 Ohms.

The third-generation Cary Audio DMS-550 network player supports signals up to PCM 32/768 and DSD512 and is based on a quad 2x2 AK4493EQ chipset with Velvet Sound architecture. A solid power supply and precision components complete the pleasant picture.

Cary Audio SLI‑80HS is an integrated tube amplifier that reveals the emotionality and depth of music. The signature warm sound and expressive dynamics make listening truly exciting. The elegant design and robust construction emphasize the premium status of the device. An ideal choice for audiophiles who appreciate the character and atmosphere of live sound.