Hifiverse
Audio

NAD CI SA2-120 BluOS Streaming Amplifier With Modular Architecture

23.01.2025 10:03 | ~1 minute read

The new NAD CI SA2-120 BluOS streaming integrated amplifier is a part of CI Modular Series, and offers high power with minimal dimensions - 1/3 width x 1U height. The model uses DirectDigital digital amplification with built-in thermostatic cooling, allowing installation of the amp in a professional rack and offers a power of 2 x 120 W. The platform also allows switching to a 4 x 60 W configuration and the use of an additional pair of outputs with Dynamic Load Management system.

NAD CI SA2-120 BluOS
NAD CI SA2-120 BluOS. Image source - (c) NAD

The NAD CI SA2-120 integrated amplifier offers a rich set of commutation capabilities, including WiFi and Ethernet connectivity, Bluetooth, Apple AirPlay 2, HDMI eARC, analogue and digital line inputs, and subwoofer output. The BluOS streaming platform on board the NAD CI SA2-120 integrated amplifier enables built-in Spotify, Tidal, Pandora, and Amazon Music streaming clients, as well as easy integration into Control4, Crestron, NICE, URC, RTI, Lutron, and KNX multiroom control systems. The cherry on top is support for Dirac Live room correction. Full specifications for the NAD CI SA2-120 will be available soon.

Specifications

This product is in the Hi-Fi and High End Electronics and Acoustics database

Integrated amplifiers — NAD CI SA2-120

  • Model name

    CI SA2-120

  • Type

    BluOS streaming integrated amplifier

  • Analog inputs (balanced)

    N/A

  • Analog inputs (single-ended)

    N/A

  • Input sensitivity (mV)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • D/A conversion

    N/A

  • Phono MM/MC current-sensing input impedance (Ω)

    N/A

  • Output power (8Ω) (W)

    2 x 120 or 4 x 60

  • Output power (4Ω) (W)

    N/A

  • Gain (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Damping factor

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

More content

  • Nagaoka MP-700 – a Special Type of Moving Permalloy Cartridge

    Nagaoka MP-700 – a Special Type of Moving Permalloy Cartridge

    The new Nagaoka MP-700 cartridge tops the Moving Permalloy (MP) series and will be available in the standard MP-700 and premium MP-700H versions. Compared to conventional moving magnet (MM) cartridges, the Moving Permalloy (MP) variant features a lighter permalloy magnet attached to the cantilever.

  • Sennheiser ACCENTUM Open — New Affordable TWS Headphones from a Famous Company

    Sennheiser ACCENTUM Open — New Affordable TWS Headphones from a Famous Company

    Sennheiser has introduced the Sennheiser ACCENTUM Open TWS headphones – the model, designed in a stylish compact design, promises, according to the manufacturer, exceptional comfort during use and a secure fit.

  • Ranieri Audio Labs Varieta – a Preamplifier for Tube-Rolling

    Ranieri Audio Labs Varieta – a Preamplifier for Tube-Rolling

    The Ranieri Audio Labs Varieta preamplifier has been released – the model uses directly heated triodes and allows for a wide range of tubes (300B, 2A3/6A3, 12A/201A, 26, 30, 31, 45, 50, 71A, 801A/10Y, 275A/252A, 245 and 842/VT52 will do). Simply ideal for those wishing to experiment with tube rolling.

  • Accuphase C-57 — Balanced Phonostage with Dual Mono Topology

    Accuphase C-57 — Balanced Phonostage with Dual Mono Topology

    Accuphase has introduced the Accuphase C-57 phono preamplifier, based on a fully balanced circuit design from output to input with dual mono topology. The Accuphase C-57 also uses a two-stage solution: the first stage is the output stage to ensure matching with MM and MC cartridges, the second stage is the correction amplifier itself.

  • Goldmund Rhea and Theia are Now Available in Passive Versions

    Goldmund Rhea and Theia are Now Available in Passive Versions

    Last year, Goldmund launched the impressive Goldmund Rhea and Theia acoustics in active versions with a wireless streamer. The all-in-one solution certainly looked brilliant, but High-End fans often prefer component systems. So now the company has introduced the Goldmund Rhea and Theia loudspeakers in a Passive version.

hifiverse