Hifiverse
...
...

Types of vinyl gear

Turntables are the starting point for most buyers. They combine plinth, motor and platter, and many arrive with an arm and sometimes a pickup already fitted, so a new owner can play records at 33 1/3 and 45 rpm straight away. Tonearms are bought separately for decks sold without an arm or for upgrading a fixed one, and the usual lengths run from 9 to 12 inches. Cartridges are the pickups themselves, grouped by generator type, from magnet and iron designs to coils, with replacement styli listed alongside them. Phonostages complete the chain by lifting the cartridge signal to line level and applying RIAA equalisation, either as standalone boxes or with step-up transformers for low-output coils. If your amplifier already has a phono input, you may only need the first three groups.

How to choose vinyl components

Think of the pickup chain as a matched set. The arm's effective mass should suit the cartridge compliance, and the phono gain must fit the cartridge output, roughly 40 dB for moving magnet and 60 dB or more for low-output moving coil. Spread the budget so no single link is far behind the rest, and check plinth mounting before buying any separate arm. Each subcategory page lists the specific figures to compare.

Brands & related reading

The section mixes full-line analogue makers that build decks, arms and pickups under one roof with specialists focused on a single product, such as cartridge houses or phono stage designers. Names like Rega, Pro-Ject or Ortofon appear as examples of each approach. Setup guides and vinyl care articles sit in the site's articles section.