Hifiverse

Phonostages - Aries Cerat Talos LE

Description, images, technical data and specifications

Aries Cerat Talos LE
Image source - (c) Aries Cerat

The Talos LE (Limited Edition) is a two-chassis, all-tube phono system from Aries Cerat of Cyprus. It uses technology from the Talos Reference and improved sections of the Talos Signature, and its Inverted Triode output stage comes from the brand's top Impera Series preamplifiers. The name refers to Talos, the bronze giant of Greek mythology who guarded Crete.

Key specs that matter

The tube complement is eight E280F, four 6D22S, one GZ34 and two Inverted Triodes. Gain without step-up transformer is 44 - 60 dB, and the custom SUT input adds 12 - 26 dB, for a total of 72 - 86 dB. Noise floor is given as <80 dB, and maximum signal-to-noise ratio is 90 dB. RIAA accuracy is ±0.2 dB, and maximum output is 10 V rms. Inputs are customisable, and loading is set with external loading modules in unlimited combinations. The main chassis measures 540 x 530 x 165 mm (W x D x H), and total weight is 130 kg.

Engineering and use context

The input stage is a proprietary differential tube stage with two independent full tube stages per channel, using two E280F tubes per channel on vibration isolation sockets. Both tubes are loaded with a transformer on a MU/permalloy core with geometrically and electrically balanced windings. The stage takes the cartridge directly in differential mode from floating RCA or XLR inputs, or through the custom SUTs, which are wound the same way and have a true balanced output. Aries Cerat states that differential amplification cancels common mode noise picked up between the cartridge body and the inputs.

RIAA equalisation uses constant low impedance Double-T LCR filters with custom coils and capacitors, fine-tuned against real-time data. Its driver stage is a small SET amplifier with an E280F loaded by a custom step-down transformer, able to drive loads down to 50 ohms. A further E280F SET stage with its own step-down transformer supplies drive current at the output.

All power supplies are in the second chassis, and local capacitor banks in the main chassis provide decoupling. The input stage supply is tube rectified with 6D22S damper diodes, multiple chokes and quad PI filters. Twelve chokes in total provide eight independent power rails returning to a single star ground. All eight tubes can be bias adjusted and monitored during operation, and heaters are DC filtered with a five-fold Pi-filter.

Pairing

A turntable with an MC or MM cartridge connects through the RCA or XLR inputs. Loading modules are built to order for the owner's cartridges. The output stage is specified to drive any preamplifier load and capacitive cables.

Alternatives

The Aries Cerat Talos Signature is the next phono stage in the Talos line.

Specifications

  • Model name

    Talos LE

  • Inputs (balanced)

    N/A

  • Inputs (single-ended)

    N/A

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    N/A

  • Output impedance (Ω)

    N/A

  • Gain (dB)

    N/A

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Dimensions (mm)

    540 x 530 x 165

  • Weight (kg)

    130

  • Official link