Hifiverse

Phonostages - Aries Cerat Kirke LE

Description, images, technical data and specifications

Aries Cerat Kirke LE
Image source - (c) Aries Cerat

The Kirke is a Triode Fet phono amplifier from Aries Cerat, the Cypriot brand founded in 2010 by designer Stavros Danos. It is a two-chassis phono system that uses evolved circuits from the Talos Limited Edition, Aries Cerat's top phono preamplifier, together with the Gen2 TriodeFet circuits of the Ianus Series.

Key specs that matter

Tube complement is eight E280F (6J11PE, E810F, E180F or compatible) and four 6AU4 rectifiers. Gain of the tube stages is 55 dB minimum and 70 dB maximum, and the step-up transformer inputs add 12 - 26 dB. Maximum signal-to-noise ratio is 90 dB, RIAA accuracy is ±0.2 dB and maximum output is 20 Vrms at an output impedance of 1 ohm. Inputs are two step-up transformer inputs, each of which can have a different ratio, and one direct input for any MC cartridge or an external SUT. The system measures 540 x 590 x 165 mm (W x D x H) and weighs 140 kg in total.

Engineering and use context

Its input stage is a proprietary differential tube stage evolved from the Talos LE, with two independent full tube stages per channel in differential mode. Two E280F tubes per channel sit on Aries Cerat Vibration Isolation sockets and are loaded with a transformer that has a proprietary MU/permalloy core blend and geometrically and electrically balanced windings. The cartridge connects directly through floating RCA or XLR inputs, or through the step-up transformers, whose balanced windings give a true balanced output. According to Aries Cerat, differential amplification cancels common-mode noise picked up between the cartridge body and the phono inputs.

RIAA equalisation uses constant low impedance Double-T LCR filters. A small SET amplifier with an E280F and a custom step-down transformer drives them and can drive loads down to 50 ohms. At the output, a single-stage, single-ended TriodeFet circuit from the Ithaka DAC generation could deliver 12 W into a loudspeaker, though the Kirke is not a power amplifier.

The unit comes with no internal loading presets. Loading modules of any value are custom built on request for the owner's cartridges, work on direct and SUT inputs and load each input independently.

All power supplies sit in a second chassis with 8 independent high voltage/current and 5 low voltage sources. For the input and LCR stages there are two tube-rectified, multi-choke supplies per channel with 6AU4GTA damper diodes and quad PI filters. The TriodeFet stage is solid-state rectified, 11 chokes are used in total, and local capacitor banks in the main chassis provide decoupling.

Pairing

A line stage or preamplifier with a line-level input is required. Loading modules matched to each cartridge are built to order.

Alternatives

The Talos LE is the Aries Cerat phono preamplifier from which the Kirke's input stage evolved.

Specifications

  • Model name

    Kirke LE

  • Inputs (balanced)

    N/A

  • Inputs (single-ended)

    N/A

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    N/A

  • Output impedance (Ω)

    N/A

  • Gain (dB)

    N/A

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Dimensions (mm)

    540 x 590 x 165

  • Weight (kg)

    140

  • Official link