Hifiverse

Cartridges - Gryphon Audio Black Diamond DLC

Description, images, technical data and specifications

Gryphon Audio Black Diamond DLC
Image source - (c) Gryphon Audio

The Black Diamond DLC is a moving-coil cartridge from the Danish company Gryphon Audio Designs and the first phono cartridge in its 40-year history. Gryphon has made phono preamplifiers since The Head Amp of 1985. It was presented at High End Munich in 2024 at USD 20,000, together with the Gryphon Siren phono stage and Apollo turntable. Its starting point is the Ortofon MC Diamond, and the project was a collaboration between Gryphon, Ortofon and the Danish Technological Institute.

Key specs that matter

Output voltage is 0.26 mV (1 kHz, 5 cm/s). Internal impedance (DC resistance) is 8 ohms, and the recommended load resistance is above 10 ohms. Gryphon lists 80 ohms as the load for the Siren. Frequency response is 20 Hz - 50 kHz (±2 dB). Channel balance is 0.5 dB and channel separation is 26 dB, both at 1 kHz. Tracking ability at 315 Hz is 70 µm, and dynamic lateral compliance is 10 µm/mN. Tracking force range is 2.4 - 2.8 g, with 2.6 g recommended. Vertical tracking angle is 23°. An Ortofon Replicant 100 stylus with an r/R 5/100 µm tip radius sits on a diamond cantilever. Cartridge weight is 18 g, and the colour is black.

Engineering and use context

Like the MC Diamond, the body is titanium formed by Selective Laser Melting (SLM). Gryphon adds a 5 µm DLC-TR (Diamond-Like Carbon) coating, developed with the Danish Technological Institute. According to Gryphon, this coating doubles the transmission speed of sound and resonance in titanium from 9,000 m/s to 18,000 m/s.

Gryphon also revised the generating system. Coil wire changes from copper to gold-plated copper (Aucurum), wound in a newly developed six-layer coil configuration with 2 x 84 windings per channel. Front and rear rubber bearings are made from a new rubber compound, and the mechanical tension of the generating system was optimised for these bearings, the coil layout and the coil material. Diamond cantilever and Replicant 100 stylus are carried over from the Ortofon MC Diamond.

Pairing

A phono stage with an MC input and high gain, or a step-up transformer for a low-impedance MC, is required. The matching phono stage is the Gryphon Siren, with MC gain of +58 or +68 dB and MC loading from 20 to 1600 ohms. A tonearm whose counterweight range covers the cartridge weight is required.

Alternatives

Gryphon lists no other cartridge, so the Black Diamond DLC has no alternative from the same brand.

Specifications

  • Model name

    Black Diamond DLC

  • Type

    MC

  • Stylus

    Replicant 100 diamond

  • Body

    titanium

  • Cantilever

    diamond

  • Coils

    6-layer coil configuration with 2 x 84 turns per channel

  • Output voltage (mV@5cm/sec)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Internal impedance (Ohm)

    N/A

  • Channel separation (dB / 1,000 Hz)

    N/A

  • Compliance (×10-6cm/dyne at 100Hz)

    N/A

  • Recommended load (Ohm)

    N/A

  • Recommended tonearms

    N/A

  • Weight (g)

    N/A

  • Official link

Related content