Hifiverse

Phonostages - Aries Cerat TALOS REFERENCE MKII

Description, images, technical data and specifications

Aries Cerat TALOS REFERENCE MKII
Image source - (c) Aries Cerat

The Talos Reference MKII is a two-chassis tube phono system from Aries Cerat. It is an all-tube, three-stage design in which every stage is transformer-coupled, and it sits in the Talos series alongside the Talos Signature and the Talos LE. During development the company tested and rejected operational amplifier and discrete JFET input stages.

Key specs that matter

Tube complement is eight E280F and four 6D22S. Total system gain is 62 dB, or 80 dB maximum through the +18 dB SUT input, and custom step-up ratios and impedances are available. Custom direct gain from 48 dB to 62 dB is available to order. Noise floor is below 88 dB unweighted, and maximum signal-to-noise ratio is 106 dB. RIAA accuracy is ±0.2 dB. Maximum output is 30 Vpp, and Aries Cerat states that very high output MM cartridges can be used without overload. The main chassis measures 480 x 350 x 165 mm (W x D x H), and total weight is 79 kg.

Engineering and use context

At the input, a proprietary true differential stage uses E280F tubes, so the cartridge signal is amplified as a symmetrical signal from either floating RCA or XLR inputs. Its two tube banks are parafeed-coupled to two mumetal transformers. Inside the chassis a step-up transformer is pre-installed, with an 18 dB ratio and fully geometrically and electrically balanced windings that give a true balanced output to the differential stage.

No internal loading presets are provided. Loading comes from custom-built modules made to the owner's cartridges, usable on both the direct and the SUT inputs, and each input can be loaded independently.

Equalisation uses a constant impedance, transformer-coupled LRC RIAA network. A small transformer-loaded single-ended triode amplifier drives this RIAA transformer system. Next comes the output stage, a transformer-coupled triode stage with another E280F, and its step-down transformer provides low output impedance, galvanic isolation and power gain.

All power supplies are housed in a matching second chassis connected by a heavy-duty umbilical cord, giving magnetic separation between the power transformer and the eight signal transformers. Local capacitor banks in the main chassis provide decoupling. Both the SET stage driving the LRC RIAA network and the SET output stage have their own separate power supply units.

Pairing

A turntable connects over floating RCA or XLR, and MC cartridges use either the direct input or the SUT input. Loading modules are ordered for the cartridges in use.

Alternatives

The Aries Cerat Talos Signature is the higher model in the Talos series, with dual adjustable input tube banks and an AC link bias system on all stages.

Specifications

  • Model name

    TALOS REFERENCE MKII

  • Inputs (balanced)

    N/A

  • Inputs (single-ended)

    N/A

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    N/A

  • Output impedance (Ω)

    N/A

  • Gain (dB)

    N/A

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Dimensions (mm)

    480 x 350 x 165

  • Weight (kg)

    79

  • Official link