ELAC

The model is equipped with an inch tweeter with a fabric dome and a 6.5-inch bass speaker with a braided aramid fiber diffuser with an enlarged magnet and a ventilated pole tip.

ELAC Debut 5.2 has a two-band configuration, and both drivers installed in them have been updated. The low-frequency receiver received a new reinforced fiber diffuser and a powerful magnetic system, which increased its efficiency in the operating frequency range and further reduced distortion.

The model uses a new tweeter with a waveguide. The silk dome tweeter is equipped with a wide suspension, and the upper limit of its operating range is raised to 35 kHz to ensure a more realistic RF reproduction.

The ELAC Debut 5.2 is relatively small in size, but thanks to its sophisticated design, it has a powerful and rich sound with fairly deep bass. This acoustics can be used when building a stereo system in a small room, or in the back channels of a high-end home theater.

The S10.2 subwoofer was created by ELAC engineers specifically to work with the acoustics of the Debut 2.0 series, adding a powerful bass foundation for musical and vocal parts.

These models feature a high-frequency driver with a silk dome on a wide suspension, operating in the range up to 35 kHz. The tweeter is loaded onto a sound guide, which aligns its directional pattern and increases efficiency. The woofer with reinforced fiber diffuser has a diameter of 4 inches.

The custom-made 1-inch aluminum tweeters of this model are rigorously calibrated to enhance the distinctive acoustic properties of the speakers of which they are a part. This fine-tuning process enhances clarity, complexity, and precision by capturing a dynamic range of modern melodies and soundtracks.

The ELAC Debut 3.0 DB53-BK is a 2-way bookshelf speaker with a low-frequency aramid fiber driver with a high strength-to-weight ratio, which boasts improved damping characteristics and excellent thermal conductivity.

The DF53-BK is a 3-way floorstanding model from the ELAC Debut 3.0 series. It is equipped with three 5.25-inch woofers.

Special tweeters are installed here — individual 1-inch aluminum tweeters are strictly calibrated to improve the distinct acoustic properties of the speakers of which they are a part.

The UniFi 2 UB52 is the perfect solution when space is expensive, but the demand for audiophile sound is non-negotiable. Using the same outstanding drivers and technologies as the other models in the series ensures that this compact 3-way bass reflex monitor delivers the appropriate sound performance.

The ELAC UniFi Reference UF52 floorstanding loudspeakers are part of the company's updated model series, which is a further development of the Uni-Fi and Uni-Fi 2.0 lines. These speakers have received a completely updated design that fully meets the requirements of today's high-end models.

The ELAC Debut Reference DFR 52 has a three-band configuration and is equipped with two low-frequency drivers. They have a diameter of 5.25 inches, which made it possible to keep the case narrow enough for convenient placement of the speaker in a residential interior.

A fairly large woofer in the bookshelf speaker has a diameter of 6.5 inches and a diffuser made of aramid fiber.

The speakers are equipped with new drivers and have a three-way configuration. The emitters for medium and high frequencies in the ELAC Uni-Fi Reference UFR52 are combined into a single design — a coaxial driver. It consists of a 1-inch tweeter with a soft dome covered with a protective mesh, which is placed in the center of a 4-inch midrange speaker. The diffuser of the latter is made of aluminum and has a low weight and high rigidity.

Although the speakers look like standard two-way speakers, they are actually equipped with three speakers. The secret is that the ALAC Uni-Fi Reference OB62 has a concentric RF/midrange emitter. It consists of a 25mm tweeter with a soft dome placed in the center of an aluminum diffuser of a 4-inch midrange.

The main part of the frequency spectrum of this model — above 300 Hz — is processed by XStat CLS electrostatic converters with a width of 13 inches (about 325 mm). They implement a number of well-known Martin Logan technologies. The CLS panels (Curvilinear Line Source) used in the Martin Logan Expression SL 13A, as in all MartinLogan electrostatic speakers, optimize the transmission of high-frequency information and stereo panoramas.

The DCB41-DS is the same active bookshelf dual-band in the master-slave configuration, equipped with a 4.5-inch bass and a 0.75-inch soft dome tweeter with 100 watts of gain in the bass reflex housing.

The speakers are equipped with 115 mm diameter bass drivers with polypropylene diffusers and 20 mm tweeters with a soft dome. The power of the built-in amplifiers is 50 watts per channel, which is quite enough for voicing medium-sized rooms.

The Navis ARB-51 is an active three–way bookshelf speaker with the aforementioned coaxial RF/midrange emitter. In addition, they are equipped with a 150mm woofer.

The ELAC Navis ARF-51 is equipped with proprietary drivers that have been designed specifically for these acoustics and have precisely set parameters. They have a combined radiator, which consists of a 4-inch midrange speaker with an aluminum diaphragm and a tweeter mounted in its center with a 1-inch soft dome.

The ELAC Carina BS 243 is equipped with a 5.25-inch diameter woofer with a solid aluminum diffuser and a wide elastic suspension. The driver is mounted on a cast chassis, equipped with a powerful magnet and an enlarged diameter sound coil. The JET branded ribbon tweeter, which is the pride of the ELAC company, is paired with the bass player.

The ELAC Carina FS 247 floorstanding speakers have a 2.5-band configuration and, with a fairly compact size, provide an assertive sound with powerful bass. The speakers are made in damped MDF housings reinforced with additional couplers to dampen unwanted resonances.

The ELAC Concentro S 503 bookshelf speakers have a three-way configuration. The concentric radiator in the speaker system consists of a Jet 5c branded ribbon tweeter and a 130 mm midrange speaker. The latter's diffuser is made of aluminum using proprietary AS-XR technology, which effectively eliminates unwanted resonances and makes the sound as transparent and detailed as possible.

The ELAC Concentro S507 four-way floorstanding loudspeaker occupies a junior position in the flagship speaker series. The low-frequency register is handled by as many as four 150 mm long-range woofers built into the sides of the ELAC Concentro S 507 case (two on each side) and covered with round grills. Thanks to the special ICD configuration (Impluse Compensated Design), it is possible to minimize unwanted mechanical vibrations and obtain a powerful, clear and precise bass without any staining.

The speakers have a four-band configuration, which is also necessary in this market segment. A combined treble/midrange unit is installed in the upper part of the front panel of the ELAC Concentra S509, consisting of a concentrically arranged Jet 5 ribbon tweeter and a treble/midrange driver with a 130 mm aluminum diffuser.

The model is a three-band design in which the main part of the frequency range is reproduced by a coaxial concentric driver consisting of a JET 5 ribbon radiator and a Ring Radiator midrange driver with an aluminum diffuser of a complex Crystal Membrane profile.

Endowed with a recognizable style and sound, the BS 302 two-way speakers, released to replace the BS 301.2 model, feature a number of interesting innovations. A modified magnetic system and an improved crossover contribute to improved sound quality, and for easy placement on the back panel of the case, there are slots for mounting on an optional wall bracket.

The speaker body is made of aluminum and carefully damped. One of the key features of the ALLOC Elegance 312.2 is the new JET 6 tape tweeter, which has been further improved by a new method of laying sound-emitting film. As a result, the detail has increased even more, and the stereo picture has become truly transparent and airy.

The ELAC Elegant BS305 is a 2-way bookshelf speaker that delivers bright and fresh sound with precise bass.

The model has a 150mm midrange/woofer driver mounted on a cast aluminum basket. Its combined AS diffuser consists of a paper base and an outer aluminum layer and is mounted on a wide rubber suspension.

Compact 2.5-way floorstanding speakers. Low-frequency drivers with a diameter of 150 mm with combined AS diffusers mounted on a cast basket. JET 6 branded AMT ribbon tweeter of the new generation. The crossover is made of selected components.

The model has a two-lane configuration. It has a 180 mm diameter bass drive with a patented AS-XR design. The low-frequency driver diffuser is made of a multilayer aluminum-based material; its faceted surface has increased rigidity. The diffuser is mounted on a wide semicircular rubber suspension, which provides piston movement of the diaphragm to obtain high sound pressure. The bass is mounted on a cast aluminum basket and equipped with a powerful magnetic system.

The speaker body is tilted back at a slight angle. This ensures the most consistent sound of the drivers and aligns the stereo picture. The geometry of the case in cross-section is close to a trapezoid, the width of the slightly convex front panel exceeds the width of the rear wall. This solution makes it possible to effectively deal with internal resonances.

The rounded corners of the housing not only give the ELAC FS 408.2 an elegant appearance, but also eliminate sound distortion caused by acoustic wave diffraction.

The ELAC FS 409.2 floorstanding loudspeaker is equipped with a JET VI ribbon tweeter. The ultralight tape membrane provides an instant response to the received signal, resulting in high sound accuracy. Another advantage of such a Twitter is a very wide frequency range with an upper limit of 50 kHz.

The ELAC BS 403.2 uses a new JET 6 tape AMT tweeter equipped with a very thin and lightweight membrane for RF transmission. It accurately reacts to the fastest changes in the musical signal, transmitting the smallest details of musical compositions. The ribbon tweeter provided frequency reproduction in the range up to 50 kHz, which made the sound transparent and airy. Acoustics can fully unlock the potential of musical compositions in new high-resolution audio formats.

An active subwoofer, a 10-inch diameter bass driver with paper diffusers, and a bass reflex hole on the bottom panel. The damped housing is made of MDF. A custom-made BASH amplifier with a rated power of 250 watts.

The ELAC Varro Premium PS350 subwoofer is equipped with a 12-inch diameter woofer and is great for voicing medium-sized rooms. The device is made in a housing made of selected MDF of considerable thickness, which ensures the rigidity of its structure.

The ELAC Varro Premium PS500 active subwoofer is equipped with a large bass driver and a powerful amplifier, and it can be used for voicing large rooms. The device is a versatile model that perfectly complements a modern home theater or stereo system.

The high-end ELAC Vero Reference RS500 subwoofer has several patented design solutions that set it apart from competing models. Despite its relatively compact size, the subwoofer develops high sound pressure and reproduces bass from a value of 15 Hz (when measured indoors).

The subwoofer body is made of MDF panels of considerable thickness and is additionally reinforced with internal ties. Thanks to this, it was possible to completely extinguish vibrations and resonances and eliminate the sound distortions caused by them. A 12-inch diameter woofer is mounted on the front panel. The driver has a patented design for increased sound output and deep bass.

The ELAC Varro DS1000-GB is a Dual Reference series subwoofer. Provides smooth and well-tuned bass for the most demanding movies or music.

The subwoofer has two low-frequency drivers with a diameter of 12 inches, manufactured using a patented technology. It involves the use of a combined diffuser made of paper and aluminum, mounted on a suspension of unusual Hex geometry. The advantage of the latter is the possibility of linear displacement of the diaphragm with a large amplitude, which is a prerequisite for obtaining a convincing sound pressure.

The subwoofer has two low-frequency drivers with a diameter of 250 mm, operating in common mode for a total internal enclosed volume. One of the speakers is pointing down and the other is pointing up, and both have a fixed acoustic load in the form of panels mounted at a certain distance in front of the diffusers. These panels, working as reflectors, ensure a uniform distribution of bass in the listening room.

The ELAC SUB 2010 is equipped with an 8-inch diameter woofer with an impregnated paper diffuser and a powerful magnetic system. This radiator is located on the side wall of the subwoofer housing, which is completely enclosed by a metal safety net. The bass is acoustically loaded onto a bass reflex, the outlet of which is located on the front panel of the case.

The ELAC Muro Sub2020 is made in a damped MDF housing, which can have black or white finishes. A low-frequency driver with a diameter of 10 inches is mounted on the side panel of the subwoofer, equipped with a lightweight and rigid polypropylene diffuser. The speaker is covered with a metal safety net that prevents accidental damage and at the same time ensures the free passage of sound waves.