Hifiverse
...
...

How to choose a phono stage

Which cartridges do you own or plan to buy? That answer sets everything else. A moving-magnet or moving-iron pickup needs about 35 to 45 dB of gain, while a low-output moving coil needs 55 to 70 dB, or an MM stage fed through a step-up transformer. Then consider loading. MM inputs normally present 47 kOhm with selectable capacitance, and MC inputs benefit from adjustable resistance, often from about 10 Ohm upward. Count the inputs if you run two arms or a deck with two cartridges, and check whether settings live on internal jumpers, rear switches or a remote. Finally, look at outputs, since balanced XLR outputs help on long runs to a preamp, and some units add a mono switch or alternative EQ curves for older records.

Key specs that matter

Gain in dB sets how well the stage matches cartridge output to your amplifier, and switchable steps make one unit fit several pickups. Signal-to-noise ratio is often 75 to 90 dB for MM and lower for MC because of the extra gain. RIAA accuracy, usually quoted within plus or minus 0.1 to 0.5 dB, shows how closely the curve is followed. Overload margin tells you how much headroom remains for loud groove peaks.

Price ranges & what you get

Under USD 300, expect compact boxes with MM and basic MC gain and few loading options. Between USD 300 and 2,000, stages add adjustable resistance and capacitance, external power supplies and sometimes two inputs. Above USD 2,000, dual-mono layouts, valve or transformer circuits and remote-adjustable loading become common.

Related subcategories & reading

Gain and loading depend on the pickup, so check cartridges for output and impedance figures. Turntables lists decks, some with a phono stage built in, and amplifiers covers the line stage that follows. Our vinyl articles explain loading and gain matching.