The MC 1600 is a balanced phono preamplifier in dual-mono design from Thorens, the brand founded in Switzerland in 1883 and now based in Bergisch Gladbach, Germany. It accepts MM and MC cartridges and is made in Germany. Thorens unveiled it at High End Munich 2025 together with the TD 404 DD and TD 124 DD Exclusive turntables. Recommended retail price was EUR 2,199 including VAT, US pricing was about USD 3,250, and in Canada it sold for CAD 4,699.
Key specs that matter
Gain is +32 dB to +68 dB in ten steps of 4 dB. MC input impedance is adjustable from 20 to 1,280 ohms in 20-ohm steps, and MM input impedance is 47 kohms. Input capacitance runs from 50 to 600 pF in 50 pF steps. Frequency response is 10 Hz - 20 kHz (±0.1 dB), and total harmonic distortion is below 0.005%. Signal-to-noise ratio is 100 dBA to 76 dBA depending on gain, relative to 2 V output and measured with 100 ohms. Crosstalk attenuation is 110 dB relative to 2 V, independent of gain. Maximum output is 10 V rms with up to 100 mA rms, and output impedance is 50 ohms (RCA) and 110 ohms (XLR). Inputs and outputs are on both RCA and XLR. Dimensions are 300 x 90 x 301 mm (W x H x D), and weight is 5 kg.
Engineering and use context
Each channel has its own fully symmetrical amplifier section with precision resistors, film capacitors and low-noise operational amplifiers. Thorens specifies two-stage amplification with passive and active RIAA equalisation. A separately shielded power supply section is built in and accepts 100-280 V with automatic adjustment.
MC cartridges deliver a balanced signal without ground reference, and Thorens names the balanced XLR connection as the connection of choice for them. For MM cartridges, which usually have a ground reference, it recommends the RCA input. There is no separate MM/MC switch, and MM operation is set by selecting 47 kohms.
Gain, input impedance, input capacitance and the subsonic filter are set with DIP switches on the underside, separately for each channel, and both channels must be set the same. Its subsonic filter has a cut-off frequency of 15 Hz with a slope of 6 or 12 dB per octave and is disabled in the DC position. According to Thorens, the 20-ohm setting makes the MC 1600 of interest to owners of Ortofon SPU cartridges. A further switch bank sets the colour of the illuminated Thorens logo on the brushed black aluminium front panel, in seven colours or off. Warranty is three years.
Pairing
A turntable with a balanced XLR output is the matching source for MC cartridges, such as the Thorens TD 1600 or TD 124 DD. The XLR outputs require a preamplifier or integrated amplifier with balanced line inputs, and the RCA outputs connect to any line input.
Alternatives
Thorens' MM 008 ADC is the brand's more compact phono preamplifier.