Hifiverse

Bookshelf Speakers - ATC SCM200ASL Pro

Description, images, technical data and specifications

ATC SCM200ASL Pro
Image source - (c) ATC

ATC's SCM200ASL Pro is a large format three-way main monitor from the company's professional range, intended for large studios and dubbing stages. It can stand free or be mounted in a soffit. Unlike most ATC active models, it has no amplifier inside the cabinet - each speaker is driven by its own P4 rack-mount amplifier, so a stereo system uses two P4 units. ATC hand-builds the drivers, cabinets and electronics in the UK, and the standard finish is black ash.

Key specs that matter

Drive units are a 34 mm soft dome HF unit, a 75 mm Super Dome midrange and twin full-specification 314 mm SL bass drivers. Crossover points are 380 Hz and 3.5 kHz. Amplitude linearity is 60 Hz - 12 kHz (±2 dB). Cut-off frequencies are 32 Hz and 20 kHz (-6 dB, free standing) and 25 Hz and 20 kHz (-6 dB, soffit mounted). Maximum continuous SPL is 118 dB at 1 m. Dispersion is ±80° horizontal and ±10° vertical, both coherent. Each cabinet measures 832 x 728 x 424 mm (H x W x D) and weighs 79 kg.

Engineering and use context

In the SL bass drivers, ATC's Super Linear technology reduces magnetic distortion. The P4 is a separate 5U rack-mount unit with grounded source Class A/B amplification rated at 850 W in total. Its four channels deliver 275 W RMS into 8 ohms for each of the two LF drivers, 200 W RMS into 16 ohms for the midrange and 100 W RMS into 6 ohms for the tweeter. Filters are even-order and critically damped, set at the same 380 Hz and 3.5 kHz points. All amplifiers have active FET momentary gain reduction for overload protection.

As a power amplifier, the P4 has an amplitude response of 5 Hz - 20 kHz (±0.1 dB), a signal-to-noise ratio above 105 dB and crosstalk better than 90 dB. Mains voltage is factory set to 100, 115 or 230 V at 50/60 Hz. Power consumption ranges from 150 VA (standby, minimum) to 1200 VA (maximum). Overall depth is 545 mm, made up of 75 mm for the front panel and handles, 430 mm for the body and 40 mm for the rear handles. A 6-year warranty covers the monitors.

Pairing

Each P4 has a male XLR input wired pin 2 positive, with 1.0 V balanced input sensitivity and an input impedance above 10 kohms. A console, monitor controller or preamplifier with balanced line outputs is required. Two P4 rack spaces of 5U each are needed for a stereo pair.

Alternatives

The ATC SCM150ASL Pro is the smaller three-way active monitor with a single 375 mm SL bass driver and its 350 W tri-amp pack built into the cabinet.

Specifications

  • Model name

    SCM200ASL Pro

  • Frequency Response low +/- 3dB (Hz)

    32 (-6dB)

  • Frequency Response high +/- 3dB (Hz)

    20 000 (-6dB)

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    275 + 275 (LF) + 200 (MF) + 100 (HF) = 850

  • Size (sm)

    83.2 x 72.8 x 42.4

  • Weight (kg)

    79

  • Official link

More components