Hifiverse

Bookshelf Speakers - ATC SCM300ASL Pro

Description, images, technical data and specifications

ATC SCM300ASL Pro
Image source - (c) ATC

The SCM300ASL Pro is a large format three-way active main monitor from the professional range of ATC. It is driven by a separate P4 rack-mount amplifier, one per monitor. In the UK the pair price was GBP 38,333 before VAT.

Key specs that matter

Each cabinet carries a 34 mm soft dome tweeter, the ATC 75 mm Super Dome mid driver and two full spec SL 375 mm bass drivers. Crossover frequencies are 380 Hz and 3.5 kHz. Amplitude linearity is 50 Hz - 12 kHz (±2 dB). Cut-off frequencies at -6 dB are 25 Hz and 20 kHz free-standing, and 20 Hz and 20 kHz soffit mounted. Horizontal dispersion is ±80° and vertical dispersion ±10°, both coherent. Maximum continuous SPL is 121 dB at 1 m. Cabinet dimensions are 884 x 925 x 460 mm (H x W x D), and ATC lists the weight as 87 kg on the product page and 140 kg in its brochure.

Engineering and use context

The P4 is a standalone 5U rack-mount grounded source class A/B amplifier rated at 850 W in total. It contains the three-way active filters and four power amplifiers - two for LF and one each for MF and HF. Per ATC's manual, the LF channels deliver 275 W RMS into 8 ohms each, the MF channel 200 W RMS into 16 ohms and the HF channel 100 W RMS into 6 ohms. Filters are even order critically damped. Overload protection combines active FET momentary gain reduction with thermal tweeter protection.

Amplitude response of the P4 is 5 Hz - 20 kHz (±0.1 dB), signal-to-noise ratio is better than 105 dB and crosstalk better than 90 dB. Cooling is by forced ventilation, with air intake at the rear and exhaust at the front, and the fans start at a heatsink temperature of about 30 °C. A 5-pin interface socket allows active and standby status to be controlled from studio automation. Each monitor connects to its P4 through one custom eight-way speaker cable, and 5 m cables are supplied as standard, with lengths up to 10 m available. The monitor can be free-standing or soffit mounted. ATC gives a six-year warranty.

Pairing

The P4 input is a rear panel female XLR, pin 2 positive, with balanced input impedance above 10 kohm and 2 V input sensitivity. A balanced line source such as a console, monitor controller or preamplifier is required. Two P4 units are needed for a stereo pair, along with rack space for each.

Alternatives

The ATC SCM200ASL Pro is the smaller large format active monitor in the same professional range, with two 314 mm bass drivers.

Specifications

  • Model name

    SCM300ASL Pro

  • Frequency Response low +/- 3dB (Hz)

    25 (-6d)

  • Frequency Response high +/- 3dB (Hz)

    20 000 (-6d)

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    275 + 275 + 200 + 100 (850 W), external amplifier P4

  • Size (sm)

    88.4 x 92.5 x 46.0

  • Weight (kg)

    87

  • Official link

More components