Hifiverse

Bookshelf Speakers — ATC SCM100ASL

Description, images, technical data and specifications

ATC SCM100ASL
Image source - (c) ATC

The SCM100ASL is the active version of the SCM100 in ATC's Classic series, a three-way vented loudspeaker hand-built in England. It carries an on-board 350 W three-way amplifier pack with a balanced line input, and its passive counterpart is the SCM100PSL. In the Classic range it sits between the SCM50 and the SCM150. Both SCM100 versions are supplied with speaker stands and fabric-wrapped grilles, and ATC gives a six-year warranty.

Key specs that matter

Drive units are a 314 mm (12 in.) SB75-314SL bass driver (8 ohms), a 75 mm (3 in.) SM75-150S midrange (16 ohms) and a 25 mm (1 in.) SH25-76S high-frequency driver (6 ohms). Crossover points are 380 Hz and 3.5 kHz with 4th-order Linkwitz-Riley slopes. Low-frequency cut-off is 32 Hz (-6 dB), high-frequency cut-off is 25 kHz (-6 dB) and matched response is ±0.5 dB. Maximum SPL is 115 dB. Amplifier output is 200 W (8 ohms) bass, 100 W (16 ohms) mid and 50 W (8 ohms) HF. The input is one rear-panel female XLR, pin 2 hot, with 20 kohms (differential) impedance and 2.2 dBu/1 Vrms sensitivity for full power. Power consumption is 34 W at idle and 345 W at full power. Each speaker measures 834 x 398 x 581 mm (H x W x D), or 1,034 mm high on its stand, and weighs 55.2 kg.

Engineering and use context

Behind the line-level stages, which comprise a balanced input and a three-way electronic crossover, each class A/B power amplifier channel is dedicated to a single drive unit. The amplifiers are of the grounded-source MOSFET type and are convection cooled. Limiting is by ATC Active FET Momentary Gain Reduction, and d.c. offset and over-temperature protection are both indicated by a rear-panel LED. According to ATC, the active electronic crossover gives a more consistent balance over a wider range of listening levels.

The 314 mm SL bass driver is loaded in a 100 litre vented cabinet, heavily braced and damped to suppress cabinet resonances. In the middle band sits ATC's 75 mm Superdome midrange. The 25 mm S-Spec soft-dome tweeter uses a dual-suspension system that ATC first employed in this 75 mm midrange. Every critical element is designed and manufactured in-house.

Rear-panel DIP switches set input sensitivity to 0, -3, -6 or -9 dB and bass shelf to 0, +1, +2 or +3 dB. Natural veneers include Black Ash, Burr Magnolia, Cherry, European Walnut, Oak, Pippy Oak, Rosewood and Walnut, with Satin Black, Satin White, Piano Black and Piano White also listed.

Pairing

A preamplifier, DAC or streamer with a balanced XLR output and volume control is required. Each speaker needs its own balanced cable and mains connection. No external power amplifier is needed.

Alternatives

The SCM50ASL is the smaller active Classic model, with a 234 mm SL bass driver in a 50 litre vented cabinet.

Specifications

  • Model name

    SCM100ASL

  • Frequency Response low +/- 3dB (Hz)

    32 (-6dB)

  • Frequency Response high +/- 3dB (Hz)

    22 000 (-6dB)

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    50 + 100 + 200

  • Size (sm)

    83.4 x 40.0 x 58.5

  • Weight (kg)

    58.5

  • Official link

More components