Hifiverse

Bookshelf Speakers - ATC SCM20ASL LE

Description, images, technical data and specifications

ATC SCM20ASL LE
Image source - (c) ATC

The SCM20ASL LE is a limited-edition two-way active loudspeaker from ATC. It was released to mark the beginning of ATC's 50th Anniversary year and is limited to 150 pairs. Its compact sealed cabinet is finished in high-gloss blue lacquer, and the front baffle is hand-upholstered in dark blue full-grain Napa leather. It is hand-built in England and carries a 6-year warranty.

Key specs that matter

Drive units are a 150 mm/6-inch bass/mid driver (SB75-150SL, 8 ohms) and a 25 mm/1-inch HF driver (SH25-76S, 6 ohms). Low-frequency cut-off is 55 Hz (-6 dB, anechoic) and high-frequency cut-off is 25 kHz (-6 dB). The crossover point is 2.2 kHz. Maximum SPL is 108 dB continuous and 114 dB peak (per pair, IEC weighted pink noise, 1 m, anechoic). Output power is 200 W into 8 ohms for the bass/mid driver and 50 W into 8 ohms for the HF driver. THD+N is below 0.0017% (1 kHz, 1 dB below rated power, 90 kHz bandwidth). Each speaker measures 450 x 250 x 425 mm (H x W x D) and weighs 27 kg.

Engineering and use context

ATC builds a 250 W amp pack module into the cabinet. It has 2nd-order Linkwitz-Riley active crossovers and two class A/B amplifiers of the Grounded Source MOSFET type, convection cooled. Signal enters through one rear-panel female XLR (pin 2 hot, 20 kohm differential) with input CMRR above 60 dB at 10 kHz.

Input sensitivity is 2.2 dBu/1 Vrms for full power. A -6 dB switch and a -6 dB variable control give a total adjustment from 2.2 dBu/1 Vrms to 14.2 dBu/4 Vrms, and the bass shelf is switchable from -2 dB to +3 dB in 1 dB steps. Protection consists of an ATC Active FET Momentary Gain Reduction limiter plus DC offset and over-temperature protection, both indicated by a rear-panel LED. Mains voltage is factory set to 220 - 230 V or 115 V. Power consumption is 26 W at idle and 312 W at full power.

The C4 Sub Mk2 LE of the same edition has a sealed cabinet in the same high-gloss blue with a leather-upholstered baffle and an on-board 300 W MOSFET class A/B amplifier.

Pairing

A source or preamplifier with balanced XLR outputs is required. The matching subwoofer is the C4 Sub Mk2 LE.

Alternatives

The SCM20ASL is ATC's regular-production active two-way loudspeaker.

Specifications

  • Model name

    SCM20ASL LE

  • Frequency Response low +/- 3dB (Hz)

    55 (-6dB)

  • Frequency Response high +/- 3dB (Hz)

    25 000 (-6dB)

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    50 + 200

  • Size (sm)

    45.0 x 25.0 x 42.5

  • Weight (kg)

    27

  • Official link

More components