Hifiverse

Bookshelf Speakers - ATC SCM150SL

Description, images, technical data and specifications

ATC SCM150SL
Image source - (c) ATC

The SCM150SL is the largest and most powerful model in ATC's Classic Series, and this passive version is designated SCM150PSL by the maker. It has the largest cabinet in the range and is intended for large rooms. Every unit is hand-built in England, carries a six-year warranty and is supplied with speaker stands and fabric-wrapped grilles. A floor-standing version with the same drive units is sold as the SCM150PSLT.

Key specs that matter

This is a three-way passive loudspeaker with a 375 mm (15 in.) SB75-375SL bass driver (8 ohms), a 75 mm (3 in.) SM75-150S Superdome mid-range (16 ohms) and a 25 mm (1 in.) SH25-76S soft-dome HF driver (6 ohms). Crossover points are 380 Hz and 3.5 kHz. Low frequency cut-off is 25 Hz (-6 dB) and high frequency cut-off is 25 kHz (-6 dB), with pairs matched to ±0.5 dB. System sensitivity is 91 dB (1 W/1 m), and maximum SPL is 117 dB. Impedance is 8 ohms nominal, 5.6 ohms minimum, and recommended amplifier power is above 100 W (8 ohms). Speaker dimensions are 884 x 498 x 595 mm (H x W x D), or 1137 mm high on the supplied stand before spikes, and net weight is 67 kg.

Engineering and use context

ATC loads the 'SL' bass driver in a 150 litre vented cabinet, and its cone area is 2.7 times that of the SCM50 bass driver. The 'S-Spec' HF unit uses ATC's dual-suspension system, a technology first used in the company's 3-inch mid-range dome. Inside, the cabinet is extensively braced and damped to suppress resonances.

Its 2nd order crossover network is hand-built by ATC with tight tolerance film capacitors and air-cored inductors, chosen by ATC for low distortion and freedom from magnetic hysteresis. Connection is through heavy-duty binding posts. Stand spikes add 25 - 40 mm to the height. Real-wood veneers include black ash, burr magnolia, cherry, European walnut, oak, pippy oak, rosewood and walnut, alongside satin black and satin white paint and gloss options.

Pairing

ATC lists its P1 and P2 power amplifiers and the SIA2 integrated amplifier as partnering electronics. The terminals allow tri-wiring.

Alternatives

ATC's SCM100SL sits below it in the Classic Series, with a 12-inch bass driver in a 100-litre cabinet.

Specifications

  • Model name

    SCM150SL

  • Frequency Response low +/- 3dB (Hz)

    25 (-6dB)

  • Frequency Response high +/- 3dB (Hz)

    22 000 (-6dB)

  • Sensitivity (dB at 1 W/1m)

    91

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    100 - 1500

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    88.4 x 49.8 x 56.8

  • Weight (kg)

    67.2

  • Official link

More components