Hifiverse

Regallautsprecher - Genelec 8040B

Beschreibung, Bilder, technische Daten und Spezifikationen

Genelec 8040B
Bildquelle - (c) Genelec

The 8040B is a two-way active studio monitor from Genelec's 8000 series, placed between the 8030C and the 8050B, and its Smart Active Monitor counterpart of the same size is the 8340A. Genelec now lists the 8040B as discontinued. It is a compact bi-amplified design for near field monitoring, broadcast and TV control rooms, audio and video post production, mobile vans and project or home studios.

Key specs that matter

A 165 mm cone bass driver and a 19 mm metal dome tweeter are crossed over at 3.0 kHz. Bass and treble amplifiers are rated at 90 W each into 8 ohms (Class AB), with THD, SMPTE-IM, CCIF-IM and DIM 100 all at 0.05% or lower and a signal-to-noise ratio of at least 100 dB. Frequency response is 48 Hz - 20 kHz (±2.0 dB), with -3 dB points at 45 Hz and 20 kHz and -6 dB points at 41 Hz and 25 kHz. Maximum short-term SPL is 105 dB or more at 1 m and 111 dB or more at 0.5 m, long-term SPL 99 dB or more, and peak output per pair 115 dB or more. Self-generated noise is 10 dB or lower (A-weighted, 1 m). Harmonic distortion at 90 dB SPL is below 2% from 50 to 100 Hz and below 0.5% above 100 Hz. Power consumption is below 0.5 W in standby, 10 W at idle and 110 W at full output. Height is 350 mm, or 365 mm with the Iso-Pod, width 237 mm, depth 223 mm, and weight 9.4 kg.

Engineering and use context

Its Minimum Diffraction Enclosure (MDE) is die-cast aluminium with curved walls that are thin but rigid, and it provides EMC shielding and heat dissipation for the amplifiers. Placing the reflex port at the back leaves room on the front baffle for an enlarged Directivity Control Waveguide (DCW), which loads the tweeter. The long, flow-optimised reflex tube has a large cross-section and ends in a wide flare. Both drivers are magnetically shielded, and a protection circuit monitors output levels.

Input is a balanced female XLR at 10 kOhm, with the level for 100 dB SPL at 1 m variable from +6 to -6 dBu. Tone controls work in 2 dB steps - Treble Tilt from +2 to -4 dB at 15 kHz, Bass Tilt from 0 to -6 dB at 100 Hz, both with a mute position, and Bass Roll-Off from 0 to -6 dB at 45 Hz. Desktop LF gives -4 dB at 160 Hz. Intelligent Signal Sensing (ISS) switches the monitor to standby after playback ends, and an ISS DISABLE switch turns this off.

Two sets of M6x10 mm threaded holes on the rear take an Omnimount size 30.0 bracket or a K&M 24180 wall mount. An M10x10 mm hole sits in the base, so the monitor is not for a microphone stand. Finishes are dark grey, black, white and RAW.

Pairing

A balanced line-level source is required. A Genelec subwoofer can be added for greater SPL and lower bass.

Alternatives

The Genelec 8340A is the Smart Active Monitor of the same size, with GLM network control.

Spezifikationen

  • Modellbezeichnung

    8040B

  • Untere Grenzfrequenz +/- 3dB (Hz)

    41

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    90 + 90

  • Größe (sm)

    36.5 x 23.7 x 22.3

  • Gewicht (kg)

    9.4

  • Offizieller Link

Weitere Komponenten