Genelec's 4420A is a two-way Smart IP installation loudspeaker, announced on 30 January 2020 for ISE together with the larger 4430A. Like the rest of the family, it is bi-amplified, takes power, audio and control over one CAT cable and runs on PoE+ or PoE. The 4420A adds a balanced analogue line input to the network connection. Inside are dedicated Class D amplifiers, a switched-mode power supply, an active crossover filter and electronic system protection.
Key specs that matter
A 105 mm cone woofer and a 19 mm metal dome tweeter each have a 50 W Class D amplifier (short-term), and the crossover is at 2.9 kHz. Frequency response is 62 Hz - 20 kHz (±1.5 dB), with -6 dB points at 55 Hz and above 42 kHz. Using PoE+ power, maximum short-term SPL is 100 dB or more, long-term SPL 94 dB or more and peak SPL above 104 dB (1 m). Self-generated noise is 5 dB or lower (A-weighted, 1 m), and harmonic distortion at 85 dB SPL is below 3% from 50 to 200 Hz and below 0.5% above 200 Hz. Dispersion is 120° horizontal and 100° vertical. Minimum delay from the analogue input to acoustic output is 2.3 ms. Power consumption is 4 W in ISS power-down, 5 W at idle and 25.5 W at full output. It measures 226 x 151 x 142 mm (H x W x D) and weighs 3.1 kg.
Engineering and use context
On the rear panel, one RJ45 port (100BASE-TX) receives AES67 or Dante streams at 32 - 96 kHz and 16 - 24 bit, and each speaker plays one channel or the sum of two. Power is PoE+ (IEEE 802.3at, Class 4, 30 W) or PoE (IEEE 802.3af, Class 3, 15.4 W) over CAT 5, 5e or 6 cable up to 100 m long. Next to it is a 3-pin Euroblock analogue input, balanced at 10 kOhm, which needs -6 dBu for 100 dB SPL and accepts up to +24 dBu. Even with the analogue input in use, PoE power on the CAT cable is still required. Typically 10 to 20 loudspeakers can be daisy-chained on one balanced line.
Its Minimum Diffraction Enclosure (MDE) is recycled die-cast aluminium, with a Directivity Control Waveguide (DCW) around the tweeter and a reflex port. Smart IP Manager software sets 20 user-adjustable filters, sensitivity from -60 to 0 dB and delay from 0 to 98 ms, and an API allows house automation control. Two rear M6 x 10 mm threaded holes take brackets or the supplied keyhole wall mount, with a 3/8 UNC hole in the base. Black, white, RAW and 120 RAL colours are offered.
Pairing
A PoE+ IP switch or PoE+ injector is required, plus an AES67 or Dante source. The analogue input takes a balanced line-level signal. Genelec advises against connecting it to power amplifier outputs.
Alternatives
The Genelec 4430A is the larger Smart IP installation loudspeaker, with a 130 mm woofer.