The 8030C is a compact two-way active studio monitor in Genelec's 8000 series and the successor to the 8030B. Genelec positions it above the 8010 and 8020 for users who need higher SPL and more bass extension in the same compact format. It is bi-amplified, with the drivers, power amplifiers, active crossover filters and protection circuitry in one enclosure. Listed uses include near field monitoring, mobile vans, broadcast and TV control rooms, surround systems and home studios.
Key specs that matter
Drivers are a 130 mm cone bass unit and a 19 mm metal dome tweeter, crossed over at 3.0 kHz. Each is driven by a 50 W Class D amplifier, with amplifier THD below 0.05% at nominal output. Frequency response is 54 Hz - 20 kHz (±2.0 dB), with -6 dB points below 47 Hz and above 25 kHz. Maximum short-term SPL is above 104 dB and long-term SPL above 96 dB (1 m), and peak output per pair exceeds 110 dB. Self-generated noise is below 5 dB (A-weighted, 1 m). Harmonic distortion at 85 dB SPL is below 2% from 50 to 100 Hz and below 0.5% above 100 Hz. Power consumption is 0.5 W or less in ISS standby, 3 W or less at idle and 60 W at full output, on 100 - 240 V AC. Height is 285 mm, or 299 mm with the Iso-Pod, width 189 mm, depth 178 mm, and weight 5.0 kg.
Engineering and use context
Its Minimum Diffraction Enclosure (MDE) is die-cast aluminium, shaped to reduce edge diffraction and combined with a Directivity Control Waveguide (DCW). A long, curved reflex tube ends in a wide flare on the rear of the enclosure. Input is a balanced female XLR at 10 kOhm, and -6 dBu gives 100 dB SPL at 1 m, with a continuously variable sensitivity control over 12 dB. An unbalanced source can be used if pin 3 is grounded to pin 1.
Four rear-panel controls set the response. Desktop gives -4 dB at 160 Hz, Treble Tilt 0 to -2 dB at 15 kHz, Bass Roll-Off a -4 dB step at 55 Hz and Bass Tilt 0 to -6 dB at 100 Hz in -2 dB steps. When the ISS switch is on, Intelligent Signal Sensing puts the monitor into standby after playback ends and wakes it when a signal returns.
Genelec's Iso-Pod (Isolation Positioner/Decoupler) table stand is made of a lossy rubber-like material and allows a tilt of ±15°. A 3/8 UNC hole in the base fits a microphone stand, and two M6x10 mm holes on the rear take Omnimount size 20.5 brackets. Each monitor comes with a 1.8 m mains cable and the Iso-Pod kit. Finishes are dark grey, black, white and RAW.
Pairing
A balanced line-level source such as an audio interface, mixer or preamplifier is required. Bass extension is available with a matching Genelec subwoofer.
Alternatives
The Genelec 8330A is the Smart Active Monitor of the same size, with GLM network control.