Hifiverse

Regallautsprecher - Genelec 8050B

Beschreibung, Bilder, technische Daten und Spezifikationen

Genelec 8050B
Bildquelle - (c) Genelec

The 8050B is a two-way model of the Genelec 8000 series of active studio monitors, intended by Genelec for nearfield monitoring in larger spaces and at longer listening distances. It is now listed as discontinued. Finishes were dark grey, white and black.

Key specs that matter

Drive units are a 205 mm cone bass driver, magnetically shielded, and a 25 mm metal dome tweeter. Amplification is 150 W Class AB for the bass and 120 W Class AB for the treble, with the crossover at 1.8 kHz. Frequency response is 32 Hz - 25 kHz (-6 dB), and accuracy is ±2 dB from 38 Hz to 20 kHz. Short-term maximum SPL is ≥110 dB (sine wave, on axis in half space, averaged 100 Hz - 3 kHz, 1 m), long-term maximum SPL ≥101 dB and peak SPL per pair ≥120 dB with music material. Harmonic distortion is ≤2% from 50 to 100 Hz and ≤0.5% above 100 Hz. Self-generated noise is ≤10 dB SPL (A-weighted, 1 m on axis). Height is 433 mm, or 452 mm with the Iso-Pod, width 286 mm, depth 278 mm, and weight 14.4 kg.

Engineering and use context

All 8000 series models use a Minimum Diffraction Enclosure (MDE) of die-cast aluminium, with a large internal volume and softly curved edges. Its walls give EMC shielding and act as a heat sink for the power amplifiers, and the casting is made in two parts, front and rear. Polyester fibre (PES) is the internal damping material. Around the tweeter, a Directivity Control Waveguide (DCW) is integrated into the enclosure. Bass loading is reflex, with a long curved tube of large cross-section terminating in a wide flare on the rear panel.

Each driver is driven by its own amplifier placed after an active crossover operating at low signal levels, and Genelec delivers the loudspeaker as a factory-aligned system. Protection circuitry reduces the output level when required, for example when the voice coil temperature reaches the safe limit. Intelligent Signal Sensing (ISS) sets the monitor to a sleep state at ≤0.5 W when no audio is present and turns it on again once a signal is detected, and an ISS Disable switch on the back panel leaves only the mains switch in control. Consumption is ≤10 W at idle and 170 W at full output. Mains voltage is 100, 120, 220 or 230 V AC, 50/60 Hz, according to region.

M6 support points in the enclosure take wall and ceiling mounts. Its Iso-Pod stand, made of a lossy rubber-like material, slides along the curved enclosure for a ±15° tilt. A 1.8 m mains cable, the operating manual and the Iso-Pod kit come in the box.

Pairing

A source with a balanced line output is required, and the input is a balanced female XLR at 10 kOhm.

Alternatives

The Genelec 8040B is the smaller two-way model in the same series, with a 165 mm bass driver and 90 W Class AB amplifiers.

Spezifikationen

  • Modellbezeichnung

    8050B

  • Untere Grenzfrequenz +/- 3dB (Hz)

    32

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    150 + 120

  • Größe (sm)

    45.2 x 28.6 x 27.8

  • Gewicht (kg)

    14.4

  • Offizieller Link

Weitere Komponenten