Hifiverse

Regallautsprecher - Genelec 8020D

Beschreibung, Bilder, technische Daten und Spezifikationen

Genelec 8020D
Bildquelle - (c) Genelec

The 8020D is a two-way active nearfield monitor in the Genelec 8000 series and the latest revision of the 8020, a design Genelec says has been a reference for nearfield monitoring for more than 15 years. Compared with previous versions, Genelec quotes higher SPL and lower energy consumption. Finishes are dark grey, white, black and unpainted RAW aluminium.

Key specs that matter

Drive units are a 105 mm cone bass driver and a 19 mm metal dome tweeter. Amplification is 50 W Class D for the bass and 50 W Class D for the treble, and the crossover is at 3 kHz. Frequency response is 56 Hz - 25 kHz (-6 dB), with an accuracy of ±2.5 dB from 62 Hz to 20 kHz. Short-term maximum SPL is ≥100 dB (sine wave, on axis in half space, averaged 100 Hz - 3 kHz, 1 m), long-term maximum SPL ≥93 dB and peak SPL per pair ≥107 dB with music material. Harmonic distortion is ≤3% from 50 to 200 Hz and ≤0.5% above 200 Hz. Self-generated noise is ≤5 dB SPL at 1 m on axis. Height is 230 mm, or 242 mm with the Iso-Pod, width 148 mm, depth 142 mm, and weight 3.2 kg.

Engineering and use context

Its enclosure is a Genelec Minimum Diffraction Enclosure (MDE) of die-cast aluminium, with a large internal volume and softly curved edges. Thin aluminium walls give EMC shielding and work as a heat sink for the power amplifiers. Inside, the damping material is polyester fibre (PES). A Directivity Control Waveguide (DCW) is integrated into the front around the tweeter. Bass loading is reflex, through a long curved tube that terminates in a wide flare on the rear of the enclosure.

Both drivers have their own amplifier, placed after an analogue active crossover that operates at low signal levels. Protection circuitry takes the signal level down on sudden peaks or constantly excessive levels. Intelligent Signal Sensing (ISS) puts the monitor into a power-saving sleep state at ≤0.5 W when no input signal is found and switches it on as soon as a signal arrives. With the ISS Disable switch set, the monitor is powered on and off only by the mains switch. Idle consumption is ≤3 W and full-output consumption 60 W, from 100-240 V AC, 50/60 Hz mains.

M6 support points in the die-cast cabinet take wall and ceiling mounts, and a thread in the base accepts a microphone stand. The Iso-Pod stand is made of a lossy rubber-like material and slides along the curved enclosure for a ±15° tilt. Supplied with it are a 1.8 m mains cable, the operating manual and the Iso-Pod kit.

Pairing

A source with a balanced line output is required, and the input is a balanced female XLR at 10 kOhm. A Genelec subwoofer can be added for bass extension.

Alternatives

The Genelec 8030C is the next two-way model in the 8000 series, with a 130 mm bass driver and a 47 Hz lower -6 dB point.

Spezifikationen

  • Modellbezeichnung

    8020D

  • Untere Grenzfrequenz +/- 3dB (Hz)

    56

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    50 + 50

  • Größe (sm)

    24.2 x 14.8 x 14.2

  • Gewicht (kg)

    3.2

  • Offizieller Link

Weitere Komponenten