The 1032C is a two-way Smart Active Monitor (SAM) from Genelec of Finland, described by the maker as a high-SPL nearfield monitor. It keeps the soffit-mountable styling of the 1000 series and is the third version of the 1032, after the 1032A of 1992 and the 1032B. Introduced in 2017, the C version adds digital connectivity, a universal power supply and Class D amplification, and Genelec quotes higher SPL and greater low-frequency extension than the A and B versions.
Key specs that matter
Drivers are a 250 mm cone bass driver and a 25 mm metal dome treble driver, both magnetically shielded. Amplifiers are 250 W Class D for bass and 150 W Class D for treble (short term), with amplifier system THD below 0.05% at nominal output. Crossover frequency is 1.8 kHz. Frequency response is 33 Hz - 23 kHz (-6 dB) and 40 Hz - 20 kHz (±2.5 dB). Maximum short term SPL is 114 dB or more, long term SPL is 104 dB, and peak output per pair is 124 dB (1 m). Harmonic distortion at 90 dB SPL is below 1% from 50 to 100 Hz and below 0.5% above 100 Hz. Dimensions are 495 x 320 x 290 mm (H x W x D), and weight is 17 kg.
Engineering and use context
Its enclosure is MDF, and the tweeter sits in a Directivity Control Waveguide (DCW). On the rear panel are an analogue XLR input (balanced, 10 kohms, maximum +25 dBu), an AES/EBU digital XLR input at 110 ohms and an AES/EBU thru output. The digital input accepts 16 - 24 bits at 32 - 192 kHz. Two RJ45 connectors link the monitor to Genelec's proprietary GLM control network, which is not Ethernet LAN compatible. Settings made in the GLM software can be stored inside the monitor and recalled with the Stored switch.
Stand-alone controls include Bass Roll-Off (-2, -4 or -6 dB), Bass Tilt below 800 Hz (-2, -4 or -6 dB), Treble Tilt above 5 kHz (+2, -2 or -4 dB) and Desktop (-4 dB at 160 Hz). Further switches cover LED disable, ISS, digital channel selection (A, B or A+B with 6 dB of attenuation) and Level in 10 dB steps, with a combined range of -42 dB. With ISS on, the monitor enters a sleep state after 60 minutes without signal by default. A front panel light shows amplifier overload and overheat protection. Mains input is 100 - 240 V, 50/60 Hz, and consumption is below 1 W with ISS active, 11 W at idle and 200 W at full output. Warranty is two years, extended to five with registration.
Pairing
Calibration requires the GLM software with a 9320A SAM Reference Controller or the GLM Calibration Kit. The matching subwoofers named by Genelec are the 7300 series SAM models. Mounting accessories include the 1032-460B wall mount and the 1032-450B stand plate.
Alternatives
The 8350A is a SAM two-way monitor with a 205 mm bass driver, 200 W and 150 W Class D amplifiers and a die-cast aluminium enclosure.