Hifiverse

Regallautsprecher - Genelec 4010A

Beschreibung, Bilder, technische Daten und Spezifikationen

Genelec 4010A
Bildquelle - (c) Genelec

The 4010A is the smallest model in the 4000 series of active installation loudspeakers from Genelec of Iisalmi, Finland. It is a bi-amplified two-way design for fixed installations and contains drivers, power amplifiers, active crossover filters and protection circuitry in one die-cast aluminium enclosure. Genelec rates it for indoor use only, at 15 - 35 °C and 20 - 90% relative humidity. Standard finishes are black and white, with RAL colours and a RAW aluminium version to order.

Key specs that matter

Drivers are a 76 mm cone woofer and a 19 mm metal dome tweeter. Amplifier power is 25 W bass plus 25 W treble (Class D, 8 ohm load), and amplifier THD+N is below 0.08%. Crossover frequency is 3.0 kHz. Frequency response is 74 Hz - 20 kHz (±2.5 dB), with -6 dB points at 67 Hz and 25 kHz. Maximum short-term SPL is 96 dB at 1 m and 102 dB at 0.5 m, long-term SPL is 91 dB, and peak output per pair is 105 dB. Self-generated noise is 5 dB or lower (A-weighted, 1 m). Harmonic distortion at 80 dB SPL is below 3% from 70 to 400 Hz and below 0.5% above 400 Hz. Dimensions are 181 x 121 x 115 mm (H x W x D), and weight is 1.5 kg.

Engineering and use context

Its Minimum Diffraction Enclosure (MDE) is shaped to reduce edge diffraction and is combined with a Directivity Control Waveguide (DCW) around the tweeter. Bass loading is a reflex port. Power consumption is below 0.5 W in standby, 5 W at idle and 30 W at full output, on 100 - 240 V AC.

Intelligent Signal Sensing (ISS) switches the amplifiers to standby after about one hour without input and resumes playback once a signal is detected. Setting the ISS DISABLE switch to ON leaves power control to the mains switch. A SENSITIVITY -10 dB switch selects between the normal setting, where -6 dBu gives 100 dB SPL at 1 m, and a 10 dB lower level. Treble Tilt attenuates the response above 5 kHz by 2 dB, and Bass Tilt reduces output below 2 kHz by 2, 4 or 6 dB. The acoustic axis is 107 mm above the base.

Each 4010A comes with a mains cable, a 3-pin audio plug and a keyhole wall mount. A 3/8 UNC thread in the base fits a standard microphone stand, and three pairs of threaded holes on the rear accept Omnimount, VESA and Sanus brackets. Genelec specifies at least 3 cm of free space behind, above and on both sides for amplifier cooling and the reflex port. The guarantee period is two years.

Pairing

Audio input is a balanced 10 kOhm Euroblock connector for a line-level source. The 4010A must never be connected to the loudspeaker outputs of a power amplifier, integrated amplifier or receiver.

Alternatives

The 4020C is the next larger model in the Genelec 4000 series, with a 105 mm woofer.

Spezifikationen

  • Modellbezeichnung

    4010A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    67

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    25 + 25

  • Größe (sm)

    18.1 x 12.1 x 11.5

  • Gewicht (kg)

    1.5

  • Offizieller Link

Weitere Komponenten