The 8350A is a Genelec SAM studio monitor from the Smart Active 2-Way Monitors line, where it sits above the 8340A. Genelec describes it as a nearfield monitor for studio and broadcast environments. It connects to the GLM loudspeaker management network for setup and calibration.
Key specs that matter
A 205 mm cone bass driver and a 25 mm metal dome tweeter are both magnetically shielded. Each has its own amplifier - 200 W Class D for bass and 150 W Class D for treble, short-term ratings. Crossover frequency is 1.8 kHz. Frequency response is 33 Hz - 22 kHz (-6 dB), with an accuracy of ±1.5 dB from 38 Hz to 20 kHz. Maximum short-term SPL is ≥112 dB (sine wave, half space, averaged 100 Hz - 3 kHz, 1 m), long-term SPL is 103 dB with IEC weighted noise, and peak output per pair is ≥121 dB at 1 m. Self-generated noise is ≤5 dB SPL (A-weighted, 1 m). Harmonic distortion at 90 dB SPL is below 2% from 50 to 100 Hz and below 0.5% above 100 Hz. Dimensions are 452 x 286 x 278 mm (H x W x D) with the Iso-Pod, height without it is 433 mm, and weight is 12.8 kg.
Engineering and use context
Its Minimum Diffraction Enclosure is die-cast aluminium in two parts, front and rear, with rounded edges and an integrated Directivity Control Waveguide around the tweeter. A long curved reflex tube ends in a wide flare on the rear of the enclosure. On the connector panel there is a balanced XLR analogue input (10 kOhm), an AES/EBU input and an AES/EBU thru output on 110 ohm XLR, plus two RJ45 sockets for the GLM network, which is not Ethernet LAN compatible. The digital input accepts 16 - 24 bit at 32 - 192 kHz, and the thru output allows daisy-chaining of up to four monitors.
GLM offers 16 parametric notch filters and two LF and two HF shelving filters, and settings are saved in each monitor for use without the network. Calibration requires the 9320A SAM Reference Controller or the GLM Calibration Kit, sold separately. Without GLM, rear DIP switches set Desktop (-4 dB at 160 Hz), Bass Tilt, Bass Roll-Off, Treble Tilt above 5 kHz, ISS, LED and level in 10 dB steps. Latency is 3.0 ms with Extended Phase Linearity off. Power consumption is <1 W with ISS active, 12 W idle and 230 W at full output, on 100 - 240 V AC. The back has two M6 threads and the base an M10 thread. Finishes are dark grey, black and white, and the warranty is two years plus three on registration.
Pairing
A balanced line-level source or an AES/EBU digital output is required. The matching subwoofers are the Genelec SAM models on the same GLM network.
Alternatives
The Genelec 8340A is the smaller SAM two-way monitor, with a 165 mm bass driver in a smaller cabinet.