MoFi Electronics

The MoFi MasterDeck turntable has a belt drive and supports three rotation speeds - 78, 33.3 and 45 rpm, smooth speed adjustment is available, the exact indicators of which are shown on the display. The drive uses a DC motor enclosed in an insulated casing. The MoFi MasterDeck has a 10-inch dual-support tonearm with a removable shell, allowing adjustment of azimuth, vertical tracking angle, overhang and anti-skating. Internal wiring is made with a cable from Cardas Audio.

The novelty is equipped with a passionic drive, a 10-inch tonearm, anti-vibration supports and an AC motor. There are two speeds of rotation of a vinyl record: 33 1/3 and 45 revolutions per minute.

An 8-inch coaxial driver is used to reproduce the medium and high frequencies, similar to that used in SourcePoint 8. This driver is installed at the top of the sculptured front panel, and two 8-inch woofers are located further away. The woofers have a paper diffuser and a bass reflex with two 3" diameter ports on the back panel.

MoFi SourcePoint 10 is a two–way speaker with a large coaxial radiator with a diameter of 10 inches, designed by Andrew Jones specifically for this model.

MoFi SourcePoint 10 is a two–way speaker with a large coaxial radiator with a diameter of 10 inches, designed by Andrew Jones specifically for this model.

A lot of attention was paid to the body and the shape of the two-inch-thick front panel. The complex multi-faceted front panel of the speakers minimizes the diffraction of sound waves. Made of one-inch thick MDF panels, the cabinet has an internal volume of 50 liters. The speakers have a sensitivity of 91 dB and a nominal resistance of 8 ohms with a minimum of 6.4 ohms.

SourcePoint 8 is equipped with a coaxial driver with a diameter of 8 inches (hence the number 8 in the model name) with a paper diffuser on a corrugated suspension, as well as a powerful Twin-Drive magnetic system on neodymium magnets with high magnetic flux. The speaker works in a phase reflex acoustic design.

The Fender x MoFi PrecisionDeck Limited Edition is a collectible vinyl record player created in collaboration between Fender and Mobile Fidelity Electronics. It stands out with an ash body with the legendary tricolor Sunburst color, like Fender guitars.

MoFi Electronics UltraDeck is a premium vinyl turntable made in the USA and has been awarded, for example, Stereo Analog Product of the Year. It is designed to reproduce vinyl as accurately and cleanly as possible, without staining the sound and with minimal vibration and noise.

MoFi Electronics UltraDeck is a premium vinyl turntable made in the USA and has been awarded, for example, Stereo Analog Product of the Year. It is designed to reproduce vinyl as accurately and cleanly as possible, without staining the sound and with minimal vibration and noise.

MoFi Electronics StudioDeck is the "entrance ticket" to the world of hi-fi vinyl from Mobile Fidelity, but with a very serious approach to sound and design. The turntable is equipped with a 10-inch straight aluminum tonearm with a ball bearing, fully adjustable in VTA, azimuth and anti-skate, which is rare in this price segment.

MoFi Electronics StudioDeck is the "entrance ticket" to the world of hi-fi vinyl from Mobile Fidelity, but with a very serious approach to sound and design. The turntable is equipped with a 10-inch straight aluminum tonearm with a ball bearing, fully adjustable in VTA, azimuth and anti-skate, which is rare in this price segment.

MoFi Electronics StudioDeck+U is a belt—driven vinyl turntable made in the USA, which comes complete with a branded MoFi UltraTracker pickup head and dust cover.

This is a top-of-the-line phono corrector developed by Peter Mednik, designed for maximum flexibility and very low noise levels. The main feature is a dual chassis: a power supply and control unit in front, and an audio track in the back, which ensures galvanic isolation and minimal interference.

The compact MM/MC-class phono corrector with very low noise and built-in amplifier for Class A headphones. It supports amplification of 40, 46, 60 and 66 dB, has a configurable cartridge load, mono mode, a subsonic filter and a 31-step volume control for headphones - all for maximum comfort and flexibility when listening to vinyl even without acoustics.

Compact and versatile phono corrector for MM and MC cartridges, created with the participation of legendary engineer Tim De Paravicini. It offers adjustable gain (from 40 to 66 dB), a wide range of loads (75 ohms – 47 kOhms), mono mode and a subsonic filter to combat distortion from deformed plates.

Compact and versatile phono corrector for MM and MC cartridges, created with the participation of legendary engineer Tim De Paravicini. It offers adjustable gain (from 40 to 66 dB), a wide range of loads (75 ohms – 47 kOhms), mono mode and a subsonic filter to combat distortion from deformed plates.

If we talk about switching capabilities, Studio DC is equipped with optical, coaxial inputs, as well as a USB Type-C input. There are analog outputs on the RCA connectors. Signal conversion is the responsibility of the ESS ES9038Q2M chip. MQA support has been announced.

The MoFi Electronics UltraGold MC is a top—of-the-line MC cartridge created in Japan and customized by Allen Perkins (Spiral Groove). Its main feature is a Nude Shibata diamond needle holder and a boron cantilever, which gives a very wide frequency range (20-35,000 Hz), excellent dynamics, clear treble and deep, rich bass.

The MoFi Electronics StudioSilver MC is a high-end MC cartridge assembled in Japan and designed for the most accurate and emotional reproduction of vinyl. Its main features are a bare MicroLinear needle holder on a harrow cantilever, very clean PCOCC copper coils, a powerful neodymium magnet and an aluminum housing with threaded inserts for easy installation.

The MoFi Electronics MasterTracker is a top-of-the-line MM cartridge with a unique V-Twin dual magnetic system that follows the geometry of a vinyl laser cutter for maximum accurate tracking and a wide stereo base. It features a Micro-Line diamond needle, Ohno copper coils, and a solid aluminum body, and delivers clear, detailed sound with excellent dynamics and deep bass.

This is an MM cartridge with a unique V-Twin dual magnetic system that follows the geometry of a vinyl laser cutter for precise tracking and a wide stereo base. It has a Nude Elliptical needle, a solid aluminum body for resonance suppression, and outstanding detailed, dynamic sound without coloring or smudging parts.

This is an MM cartridge with a unique V-Twin dual magnetic system that follows the geometry of a vinyl laser cutter for precise tracking and a wide stereo base. It has a Nude Elliptical needle, a solid aluminum body for resonance suppression, and outstanding detailed, dynamic sound without coloring or smudging parts.

An affordable MM cartridge with a V-Twin dual magnetic system that follows the geometry of a vinyl laser cutter for precise tracking and a wide stereo base. It is equipped with an elliptical diamond needle, the body is made of polymer, and the sound is rich in detail, soft tops and good dynamics — a great option for the first serious upgrade head.

An affordable MM cartridge with a V-Twin dual magnetic system that follows the geometry of a vinyl laser cutter for precise tracking and a wide stereo base. It is equipped with an elliptical diamond needle, the body is made of polymer, and the sound is rich in detail, soft tops and good dynamics — a great option for the first serious upgrade head.