Напольная акустика — Scansonic HD M20.2

The M20.2 belongs to the M line of three models from Scansonic HD, the Danish company that builds every model on the background of the Raidho high-end brand. It sits between the compact M15.2 and the M30.2, which the company presents as the leading model of the line, and is a passive floorstanding design that combines a ribbon tweeter with a pair of rear-facing passive bass drivers. Scansonic positions the M series as a line that pairs signature Scandinavian styling with high-fidelity engineering at an accessible price. The series, with M15.2 as its standmount member, became available in April 2025, and the M20.2 launched at EUR 2,600 per pair.

Key specs that matter

Up front is a ribbon tweeter with a Kapton membrane measuring 71.5 x 44.5 mm, then two 5.25-inch woofers with honeycomb cones and two passive bass drivers with paper cones. Scansonic quotes a frequency response of 38 Hz to 30 kHz and a sensitivity of 88 dB. Nominal impedance is 8 ohm, with a stated minimum of 4 ohm. The crossover point is 3.2 kHz with a second-order network. Each cabinet measures 240 mm wide, 935 mm high and 380 mm deep, and weighs 18.8 kg. Two finishes are offered, Silk White and Silk Black.

Engineering and use context

The M20.2 is described by its maker as a 2.5-way design with passive radiator bass loading rather than a conventional bass reflex port, a choice shared by all three M models. Both 5.25-inch woofers cover the midrange and the low frequencies, while the passive radiators on the back of the enclosure add low-frequency output without a reflex opening. The woofer cones are reinforced with a honeycomb structure, and Scansonic lists advanced cone materials working together with high-grade crossover parts, chosen for low distortion and good phase alignment between the drivers. Scansonic also notes the slim profile of this model. Its tweeter relies on a neodymium magnet. Across the M series the same recipe of a ribbon tweeter, rear passive bass units and a similar crossover approach is used, and technology from Raidho has trickled down into the range.

Pairing

For the M20.2 the maker advises amplification rated from 50 to 180 W. The catalogue of the brand also includes the L10 centre speaker and the L12 SUB active subwoofer from the L series for a multichannel system.

Alternatives

Above it in the range, the Scansonic HD M30.2 is a 3-way passive radiator design with two 6.5-inch woofers, a 4-inch mid-woofer and a response reaching down to 33 Hz.