Audio Note

Ultra-high efficiency is maintained across the entire frequency band, making the ANNE extremely well suited for use with high-quality tube amplifiers. The carefully selected shape of the ANNEX bass reflex case improves dispersion and bass output.

The AN-K has two drivers (a 0.75" dome tweeter made of lightweight polymer and a paper conical 8" woofer) in each case and works out a very wide frequency range for its modest size.

Like all other Audio Note speaker models, the AN-J goes through a rigorous drivers selection and matching process that ensures the lowest possible pair tolerances in the entire audio industry.

Ultra-high efficiency is maintained across the entire frequency band, making the ANNE extremely well suited for use with high-quality tube amplifiers. The carefully selected shape of the ANNEX bass reflex case improves dispersion and bass response.

The Audio Note AN-X speakers have enclosures with a bass reflex and are designed to be located close to the boundaries of the room (in this case, the efficiency in the low frequency range increases significantly), regardless of whether the speakers stand on high stands or lie on their side, on a rigid shelf.

The Audio Note AN-X speakers have enclosures with a bass reflex and are designed to be located close to the boundaries of the room (in this case, the efficiency in the low frequency range increases significantly), regardless of whether the speakers stand on high stands or lie on their side, on a rigid shelf.

The Audio Note AZ-Two speakers are floorstanding, with a rear folded quasi-parabolic horn with a mouth on the back wall. Speakers, with two drivers in each. They are highly efficient and offer a light load to the amplifier, making them very suitable for our excellent low-power tube amplifiers.

Audio Note vinyl players are distinguished by their careful attitude to vinyl sound. All the advantages of vinyl – warmth, naturalness, naturalness of sound – all this is present in the sound of the AN TT One Deluxe player.

The turntable is built on a high-quality aluminum sub-chassis with an optimized three-point suspension geometry. Two opposing AC electric motors deliver twice as much torque to the low-weight acrylic disc, and additionally stabilize the suspension. The sturdy and durable bearing holds the hardened and polished shaft in a brass cup with a solid thrust heel and precision steel ball. This player has a high and long-term value for analog playback, just like its progenitor Systemdek IIx..

The Audio Note UK TT Three has three speeds: 33, 45 and 78 revolutions per minute (the latter is adjustable from 60 to 120 rpm). The support disc is made of polycarbonate and weighs 900 g. (Traditionally for the company, instead of choosing a rotational mass, here the rotational energy is created in the drive system).

The Audio Note UK TT Three has three speeds: 33, 45 and 78 revolutions per minute (the latter is adjustable from 60 to 120 rpm). The support disc is made of polycarbonate and weighs 900 g. (Traditionally for the company, instead of choosing a rotational mass, here the rotational energy is created in the drive system).

Audio Note TT Tri Reference players are available as standard in the following finishes: silver base and silver chassis, silver base and black chassis, black base and silver chassis, black base and black chassis. Power supplies with a front panel made of brushed aluminum or polished black acrylic…

Audio Note TT Tri Reference players are available as standard in the following finishes: silver base and silver chassis, silver base and black chassis, black base and silver chassis, black base and black chassis. Power supplies with a front panel made of brushed aluminum or polished black acrylic…

The Audio Note IQ pickups represent the best embodiment of a moving magnet design at the moment. Thanks to the highest quality of the components, they provide excellent tracking, excellent dynamic range and long service life.

The coils in all IQ pickup models are made of high purity copper wire (99.999%) and incredibly small diameter. People often ask us why we don't release the "silver" version of IQ pickups. The reason is very simple: the production of silver wires of such a small caliber is impossible.

The IQ3, unlike the younger models in the series, uses a titanium needle holder. Combined with diamond-ground Gyger Type I profile, IQ3 pickups provide an incredible level of performance for moving magnet designs.

The Audio Note R Zero V2 phono corrector represents a new level in affordable, high-quality analog playback. Never before have products in this segment offered such a level of sonic authenticity, innovative design, and component quality at such an affordable price. With the same physical size as the rest of our new Zero line, it has the incredible advantage of its tiny body. Inside, it is equipped with a pair of miniature 6112WA dual triodes.

The Audio Note M1 has been specifically designed to reproduce musical imagery rather than showcase technical features, and offers an outstanding sound level at this cost. The Audio Note M1 Line meets all the criteria of Audio Note (UK) Level 1. It is characterized by a pure Class A amplifier, zero negative feedback, and high-quality materials and components. The line also includes Audio Note M1 RIAA and Audio Note M1 Phono preamps.

The Audio Note M2 is a Class A dual—channel tube preamp based on 5814a, 6X5 and ECL82 lamps, with fully discrete circuitry without feedback for maximum natural and musical sound. It is equipped with five inputs, two outputs, an input impedance of 100 kOhm and a gain of about 18 dB.

The Audio Note M3 is a third—level preamp built according to a pure Class A circuit, with a single-stroke topology without feedback and tube power for maximum musical and natural sound. The linear stage uses ECC82 and 5687WB lamps, and the power supply is implemented on a 6X5 lamp with additional ECL82 and 5651 lamps to stabilize the voltage.

The Audio Note M3 is a third—level preamp built according to a pure Class A circuit, with a single-stroke topology without feedback and tube power for maximum musical and natural sound. The linear stage uses ECC82 and 5687WB lamps, and the power supply is implemented on a 6X5 lamp with additional ECL82 and 5651 lamps to stabilize the voltage.

The Audio Note M5 Line preamp has been designed for maximum linearity and minimal transient distortion, and avoids the need for harmful "corrective" measures such as inherently error-prone feedback loops. Instead of using separate volume and balance controls. The Audio Note M5 is equipped with a dedicated Audio Note step attenuator for each channel.

The Audio Note M6 preamp is specifically designed to reproduce musical images, rather than demonstrate technical characteristics, and meets all the criteria for Level 4 Audio Note (UK).

Linear level 5 preamp. Linear cascade on 6463 lamps, 2-watt tantalum Audio Note resistors, Black Gate capacitors and silver foil Audio Note signal capacitors. The power supply unit is based on the M10. Output transformers with silver wire windings Audio Note (99.99% purity) on double U-shaped cores.

The Audio Note M9 RIAA phono corrector is without a doubt the best phono corrector we have ever produced. As expected, no third-party developers or components were involved in the development, and this is a full-fledged Audio Note Tier 5 product.

The M10 is a stereo control center that uses the best developments and components of Audio Note. The main highlight of the M10 is the Galahad power supplies developed by Audio Note. The patent obtained for them describes "devices that provide voltage and current with a quality higher than that of a battery."

The lamp set consists of four ECL82 triode pentodes operating in class A/B and producing 8 watts per channel. The ECL82 lamp operates in Class A up to 80% of its rated power, and switches to Class A/B closer to the maximum, which ensures low heat dissipation, reliability and long service life.

Single-stroke tube amplifier Audio Note Oto SE Signature, ( 2x EL84 ). The latest incarnation of our classic and award-winning integrated amplifier, the Audio Note Oto SE Signature retains all the legendary qualities that have made the Audio Note Oto SE such a worldwide favorite, and adds some very rare additional features. Not only the key internal components have been improved — tantalum resistors and copper foil capacitors installed at critical points of the circuit, but also the output transformers now have double C-cores on HiB plates.

Lamp Soro PP audio signal, ( 2x6L6 ) 20 W, Class A, 6L6G, push-pull integrated amplifier, 4 V, for recording, 4x ECC82/12AU7, 4x 6L6G. The two-stroke, pure Class A tube design offers an outstanding level of reproduction. The Soro audio play was specifically designed for music distribution, not technical interpretation, and represents a Level 1 criterion Audio Play (UK).

An integrated amplifier that outputs 28 watts per channel from a pair of EL34 lamps operating in push-pull mode. It is capable of controlling a wide range of speakers thanks to exceptional dual C-core output transformers specially designed and manufactured by Audio Note (UK).

The Audio Note Meishu Line 300B Tonmeister is a Class A integrated tube amplifier based on a single—stroke circuit with a 300B lamp, without feedback, with a power of 8-9 watts per channel. The amplifier is distinguished by its proprietary "musical" sound, hand-assembled, high-quality components and transformers of its own production.

The Audio Note Meishu Konzertmeister is a Class A integrated tube amplifier based on the 300B, built according to a single—stroke circuit without feedback, with an output power of about 8 watts per channel. It is based on Tonmeister, but has been brought up to level 4 in terms of internal components: proprietary transformers, copper and silver wiring, top-end capacitors and resistors, and manual spot wiring are used here.

Audio Note Jinro tube amplifier, ( 1x211 ). Single-stroke integrated amplifier with 211 lamps in the output and 5687 in the input stage; with a driver on a transformer designed and manufactured by us with a copper wire wound on a double C-core with 1:2 HiB plates; with standard Level 3 components (Beyschlag resistors) developed and manufactured by us with a copper wire wound on a double C-core with HiB plates, output transformers; with rectifiers on 2x NOS 5R4WGB; with a network transformer on a double C-core with HiB plates.

The Audio Note Toai, a pure Class A single-stroke tube amplifier that uses the highly prized 211 triodes, represents a level of performance radically superior to the vast majority of modern designs. The Audio Note Toai has been specifically designed for music playback, not a technical specification, and meets the Audio Note (UK) Level 4 criteria.

Audio Note Ongaku tube amplifier, ( 1x 211 ). Single-stroke integrated amplifier with 211 lamps in the output and Telefunken 6463 NOS in the input stage; with a driver on a silver wire wound by Audio Note on a double C-core with AN-Perma 50% nickel plates 1:2 transformer, with standard Level 5 components, 2 W tantalum resistors designed and manufactured by us Audio Note, Black Gate Electrolytic Capacitors.

Audio Note Conqueror power amplifier. ( 1x 300B ) Level 3, single-stroke 8W Class A triode stereo amplifier without feedback, power supply with tube rectifier and choke, Audio Note ( UK ) copper foil signal capacitors, Audio Note ( UK ) output transformers. Lamp set: 2x 300B, 2x 6SN7, 1x 5U4G.

Audio Note P1 SE Signature power amplifier ( 2x EL84), level 2, single-stroke 10 W Class A stereo amplifier with 4x EL84 and 2x ECC83 lamps connected in parallel, Audio Note signal capacitors, Audio Note 100 kOhm input volume control for independent, without pre-amplifier, operation with a single linear source.

Audio power amplifier mark R2 GP2 (in 2x 6L6), Level 2, 18 Watts in Class A single-stroke stereo amplifier with 5881 4x and 2x 6SL7 lamps connected in parallel, audio mark 100 kOhm input volume control for independent, without pre-amplifier, operation with a single linear source. Operating in pure class A, the single-stroke tube amplifier preserves the musical signal as a whole and, in terms of performance, radically surpasses most modern analogues. The P2SE audio note represents the entire criterion of the Level 2 Audio Note (UK).

Audio Note Tomei Kensei power amplifier. (1x 211 ) Level 4, single-stroke ~20W Class A stereo power amplifier. Using the same scheme as Audio Note Ongaku Kensei and Jinro Shochu, Audio Note Tomei Kensei fills the gap between them. The use of copper in the primary and silver in the secondary windings of transformers makes its design unique and attractive.

Audio Note Jinro Shochu power amplifier. (1x 211 ) Level 3, single-stroke ~20W Class A stereo power amplifier. For those who have been waiting for the unsurpassed performance level of our Audio Note Ongaku, but with the added flexibility of a symmetrical input, the wait is over.

Audio Note Vindicator Silver Signature Power Amplifier, ( 1x 2A3), Level 3, single-stroke 3.5 W Class A stereo power amplifier without feedback, power supply with tube rectifier and choke, copper foil signal capacitors Audio Note™, output transformers Audio Note™, Silver wire wiring Audio Note™, 1x 6SL7GT in the input stage, the output stage is based on a single 2A3 Sovtek with a 5R4GY cenotron.

Audio Note P3 Silver Signature power Amplifier. ( 1x 300B ) Level 3, single-stroke 8W Class A stereo amplifier, 2x 300B, Audio Note™ 100kOhm input volume control for independent, non-preamp operation with a single linear source.

The Audio Note Ongaku runs on a pair of 211 lamps (6072 x 2, 5687 x 2, GZ34 x 4 tubes are also used), develops a power of 2 x 27 watts with 5% distortion in the frequency response from 8 to 21,000 Hz. The device weighs 34 kg.

Audio Note Neiro Power Amplifier. ( 2x 2A3 ) Level 4; 8 Watts in Class A; single-stroke, feedback-free mono power amplifiers with parallel connection of 2A3 output triodes. Operating in pure Class A, the single-stroke monaural amplifier with parallel lamps, using a pair of highly prized 2A3 triodes in each case, represents a level of performance radically superior to the vast majority of modern analogues.

Audio Note Empress power amplifier. ( 2x 2A3 ) Level 3; 8 Watts in Class A; single-stroke, feedback-free mono power amplifiers with parallel connection of a pair of 2A3 output triodes, a lamp-rectified power supply and a smoothing choke.

The standard version of Audio Note Quest uses Audio Note™ copper foil signal capacitors, Beyschlag metal film resistors, standard electrolytic capacitors, ours, Audio Note (UK), I-E-core output transformers; lamp set: 4 x 300B, 2 x 6SN7, 2 x 5U4.

The standard version of Audio Note Quest uses Audio Note™ copper foil signal capacitors, Beyschlag metal film resistors, standard electrolytic capacitors, ours, Audio Note (UK), I-E-core output transformers; lamp set: 4 x 300B, 2 x 6SN7, 2 x 5U4.

The standard version of Audio Note Conquest uses Audio Note™ copper foil signal capacitors, Beyschlag metal film resistors, standard electrolytic capacitors, ours, Audio Note (UK), I-E-core output transformers; lamp set: 4 x 300B, 2 x 6SN7, 2 x 5U4.

The Audio Note P4 Balanced version is equipped with XLR connectors instead of RCA connectors. These connectors are connected to an extremely high-quality, Audio Note (UK)™ input transformer, providing the best possible connection for properly balanced equipment. The balancing transformers of the XLR inputs are manually wound in Audio Note (UK) with copper wire. The core material is of the highest quality, offering the best signal path from your preamplifier.

The Audio Note P4 Balanced version is equipped with XLR connectors instead of RCA connectors. These connectors are connected to an extremely high-quality, Audio Note (UK)™ input transformer, providing the best possible connection for properly balanced equipment. The balancing transformers of the XLR inputs are manually wound in Audio Note (UK) with copper wire. The core material is of the highest quality, offering the best signal path from your preamplifier.

Audio Note Shinri power amplifier. ( 1x 300B ) Level 4; 10 Watts in Class A; single-stroke, feedback-free mono power amplifiers on a single 300B output lamp. Operating in pure Class A, the single-stroke tube amplifier, which uses one 300V direct-channel triode in each channel, represents a performance level radically superior to most modern analogues. The Audio Note Shinri was specifically designed for music playback, not a technical specification, and meets the Audio Note Level 4 criteria.

Monoblock single-stroke amplifiers of the 4th level. Power 22 W, class A, without feedback with parallel activation of the output triodes 300B. Double C-cores made of Ultra HiB plates with copper primary and silver secondary windings, signal capacitors made of copper foil Audio Note™, 1 W tantalum resistors, Silmic and Black Gate decoupling capacitors. all internal wiring is with a silver Audio Note™ cable; a set of lamps for two Kassai monoblocks: 4x 300B, 2x NOS 6SN7, 2 x NOS 5U4GB.

The Audio Note Gaku-On amplifier is the pinnacle of our monaural amplifiers, and we did not consider any costs during their development and production. The most sophisticated components are used, including a variety of Black Gate™ capacitors, our own Audio Note (UK) silver foil capacitors and tantalum resistors, silver wire and the finest metals for all transformers, as well as silver wiring for the entire signal circuit.

Operating in pure Class A, the single-stroke monaural amplifier with parallel lamps, using a pair of highly prized 211 triodes in each case, represents a level of performance radically superior to the vast majority of modern analogues. They use a similar scheme and topology to the legendary Audio Note (UK) Gaku-On.

Audio Note Ginrei, a pair of single-stroke monoblock amplifiers with parallel output lights, operate in pure Class A and use a pair of highly valued 211 triodes per case, representing a performance level radically superior to most modern analogues.

The CD-Zero is equipped with a modified Philips front-loading transport. An analog output stage on a 6111WA dual triode. Finishing options: brushed aluminum or classic black acrylic.

An upgraded version of CD1.1x. CD player with Philips L1210 transport and remote control. Case color: Black, silver.

The Audio Note CD3.1xV2 is the first integrated CD player model in our range to use the highly prized AD1865 digital-to-analog converter chip, the same device we use in our more expensive standalone DACs.

CD-4.1x is a completely new CD player that has no analogues in the audio industry. It uses a Two/II CD transport with an upgraded DAC from the CD-2.1x Mk.II, on the digital printed circuit board there are Audio Note tantalum resistors and Black Gate capacitors, on the output stage there are Audio Note capacitors made of copper foil.

The model is based on the proprietary Pro 2LF optical disk transport with a top loading and a three-beam laser head. The device is designed in a hybrid concept — the analog part is made on dual triodes 5814a and 5687WB, powered by a pair of proprietary output transformers with SHiB cores.

Philips' customized front-loading internal modified mechanism is exclusively designed for reading authentic Red Book CDs, which, in our opinion, is still the best digital music format available.

Audio Note CDT-One V2 is equipped with digital outputs of both unbalanced RCA 75 ohm SPDif and balanced XLR 110 ohm AES/EBU, with transformer connection

Audio Note CDT-One V2 is equipped with digital outputs of both unbalanced RCA 75 ohm SPDif and balanced XLR 110 ohm AES/EBU, with transformer connection

Level 2 CD transport based on a modified Philips CD Pro2LF top-loading mechanism, remote control. Finishing options: brushed aluminum or classic black acrylic.

A Level 3 CD transport based on a modified Philips CD Pro2LF top-loading mechanism. A power supply unit with 3 power transformers. A silver Audio Note AN-Vx cable is used for internal digital signal transmission. Output transformer with silver wire windings with thin lamination. The circuit uses Audio Note tantalum resistors and keratin electrolyte capacitors.

A Level 3 CD transport based on a modified Philips CD Pro2LF top-loading mechanism. Power supply unit with 3 power transformers, with throttle filtration.

The device is built on an aluminum chassis weighing 22 kg, and the transport mechanism is a modified Phillips CD Pro2LF drive, which, in turn, is mounted on its own spring-loaded chassis for maximum mechanical insulation.

The best-in-class CD Transport Audio Note CDT Six, it has been specially designed to convey the most emotional sound characters, and meets all the criteria of Audio Note Level 6.

The Audio Note DAC 0.1 x digital-to-analog converter uses the Philips TDA1543 digital-to-analog stereo converter chip and has a zero feedback output stage on the 6111WA lamp. The DAC uses Audio Note's revolutionary and currently exclusive digital technology, called 1x oversampling, which comes directly from the CD topography.

The Audio Note 1.1x V2 Signature digital-to-analog converter has been specifically designed to reproduce musical characters, not technical specifications, and meets all the criteria of Audio Note (UK) Level 1.

The Audio Note DAC2.1x Signature has many updated components compared to the standard version, including our proprietary Audio Note (UK) tantalum resistors and copper coil capacitors used in key circuits.

The Audio Note DAC2.1x Signature has many updated components compared to the standard version, including our proprietary Audio Note (UK) tantalum resistors and copper coil capacitors used in key circuits.

Audio mark DAC3.1x V2-it does not have excessive sampling, does not reduce jitter, does not generate noise and does not perform re-synchronization. After removing all digital filtering necessary for over-sampling, all filtering is performed in the analog domain, where it is easier to maintain good broadband phase and dynamic coherent behavior.

Audio mark DAC3.1x V2-it does not have excessive sampling, does not reduce jitter, does not generate noise and does not perform re-synchronization. After removing all digital filtering necessary for over-sampling, all filtering is performed in the analog domain, where it is easier to maintain good broadband phase and dynamic coherent behavior.

CD-4.1x is a completely new CD player that has no analogues in the audio industry. It uses a Two/II CD transport with an upgraded DAC from the CD-2.1x Mk.II, on the digital printed circuit board there are Audio Note tantalum resistors and Black Gate capacitors, on the output stage there are Audio Note capacitors made of copper foil.

The Audio Note DAC 5 Signature is the most unique digital product available today. It uses the most unusual and innovative digital circuit on the market, combined with some of the best components, materials, and power supplies. The Audio Note DAC 5 Signature features an updated version of the M6 Line preamp output stage with a pair of 5814a (ECC82/12AU7a/6189) dual triodes and a Telefunken 6463.

The Audio Note Fifth Element digital-to-analog converter is without a doubt the best DAC we have ever produced. As expected, we did not use third-party developments in the design of the circuit or the components used, and this is a full-fledged Audio Note Level 5 product.

The Audio Note Fifth Element digital-to-analog converter is without a doubt the best DAC we have ever produced. As expected, we did not use third-party developments in the design of the circuit or the components used, and this is a full-fledged Audio Note Level 5 product.

The anniversary version of the Audio Note Oto SE 35 35th Anniversary Edition received new output transformers of its own design, an improved power supply with a choke and optimized time constants, as well as updates to the output stage board. The phono corrector with increased sensitivity has also been redesigned, eliminating the need for a linear preamplifier required in previous versions.

Audio Note Izvor is a digital-to-analog converter (DAC) developed by Audio Note (UK). The name comes from a Slavic word meaning "spring", "spring" or "well". The project was created after 12 years of research and aims to return to the basics of digital-to-analog conversion with an emphasis on component quality and engineering harmony.

The Audio Note Meishu Phono 300B Tonmeister is an integrated amplifier that embodies the philosophy of pure analog sound. He carefully conveys the finest shades of vinyl recordings, revealing their musical essence. The refined design and attention to detail emphasize the premium quality of the model. The perfect choice for connoisseurs of authentic sound and acoustic harmony.

Meishu Tonmeister Line is an integrated tube amplifier from Audio Note (UK). This is a high-end (High End) model using 300B tubes, designed according to a single‑ended circuit in pure class A without negative feedback.