02.01.2025 08:17 | ~1 minute read
Greek company Lab12 has released the Lab12 Mighty tube power amplifier, operating in class A and providing an output power of 2 x 10 W. The model is compatible with both the Lab12 Hpa and True branded preamplifiers, as well as with a wide range of preamplifiers from other manufacturers.
Lab12 Mighty is compatible with EL34, 6550, KT88 output tubes (EL34 from the factory), does not use feedback and has a triode/ultralinear mode switch.
The preamp is also equipped with Nissei analog volume meters.
Like all Lab12 products, the Mighty power amplifier is housed in an anodized case. The amplifier is already on sale at a price of 2,400 euros.
This product is in the Hi-Fi and High End Electronics and Acoustics database
Model name
Mighty
Input sensitivity (mV)
N/A
Input impedance (balanced) (Ω)
N/A
Input impedance (single-ended) (Ω)
N/A
Output impedance (balanced) (Ω)
N/A
Output impedance (single-ended) (Ω)
N/A
Max current (A)
N/A
Output power (8Ω) (W)
2 x 10
Output power (4Ω) (W)
N/A
Gain (dBu)
N/A
Frequency response low +/- 3dB (Hz)
20
Frequency response high +/- 3dB (Hz)
25000
Signal to Noise Ratio (dB)
N/A
Total Harmonic Distortion + Noise (0% global feedback) (%)
N/A
Total Harmonic Distortion + Noise (100% global feedback) (%)
N/A
Max power consumption (W)
N/A
Damping factor
N/A
Dimensions (mm)
320 x 170 x 290
Weight (kg)
9
Official link
Canor Audio has introduced the hybrid integrated amplifier Canor Virtus A3. The model uses the "dual mono" topology, a vacuum tube preamplifier on a pair of E88CC tubes, is equipped with a built-in digital-to-analog converter, a phono preamplifier and has a 1.3-inch touch LCD screen.
The new Nagaoka MP-700 cartridge tops the Moving Permalloy (MP) series and will be available in the standard MP-700 and premium MP-700H versions. Compared to conventional moving magnet (MM) cartridges, the Moving Permalloy (MP) variant features a lighter permalloy magnet attached to the cantilever.
Sennheiser has introduced the Sennheiser ACCENTUM Open TWS headphones – the model, designed in a stylish compact design, promises, according to the manufacturer, exceptional comfort during use and a secure fit.
The Ranieri Audio Labs Varieta preamplifier has been released – the model uses directly heated triodes and allows for a wide range of tubes (300B, 2A3/6A3, 12A/201A, 26, 30, 31, 45, 50, 71A, 801A/10Y, 275A/252A, 245 and 842/VT52 will do). Simply ideal for those wishing to experiment with tube rolling.
Accuphase has introduced the Accuphase C-57 phono preamplifier, based on a fully balanced circuit design from output to input with dual mono topology. The Accuphase C-57 also uses a two-stage solution: the first stage is the output stage to ensure matching with MM and MC cartridges, the second stage is the correction amplifier itself.