Peak Consult El Diablo floorstanders from Denmark, driven by a CH Precision M1.1 stereo power amplifier, anchor this four-component room from High End Munich 2025. Everything ahead of the speakers comes from the same Swiss maker, with a C1.2 DAC as the digital source and an L1 line stage handling volume and switching, so the electronics share one design approach from converter to output terminals.
The system at a glance
Four boxes make up the chain - a DAC, a line stage, a stereo power amp and two three-way speakers. The chain is purely digital, built for a large show room and for listeners who want a single-brand electronics stack in front of a heavy floorstander. The C1.2 was priced at about EUR 32,850 with one digital input card, which places the whole system firmly at the upper end of the market.
Why these components work together
The El Diablo is a three-way design rated at 90 dB sensitivity and a 5 ohm nominal impedance, with bass extension to 20 Hz and a weight of 90 kg per cabinet. That sensitivity is moderate, and a speaker reaching that deep asks for steady current more than for raw voltage. The M1.1 delivers 2 x 200 W into 8 ohm from a fully discrete circuit whose driver stage runs in pure class A, fed by a 2,200 VA transformer and a 250,000 microfarad capacitor bank inside a 71 kg chassis. That reserve keeps the supply rail from sagging when the woofers draw heavily. The L1 is a fully discrete, balanced, dual-monaural line stage with heavily regulated and filtered supplies and very wide bandwidth, so the balanced path stays intact from source to amplifier. The C1.2 uses four Burr-Brown PCM1704 R-2R chips for each channel, oversampling PCM to 705.6 or 768 kHz with CH's own PEtER filter, while DSD arrives via DoP up to DSD512. Its own volume control can be bypassed when it feeds the L1, so gain is set in one place only.
How it sounds
With a large supply behind the amplifier, deep bass keeps its weight and shape at show levels, and large orchestral or electronic material builds without the low end thickening. The quiet balanced chain lets small details and room ambience come through, and the speakers step back from the image so the stage forms between and beyond the cabinets.
Considering a similar setup
The amplifier is the part to protect. A replacement for the M1.1 needs a generous linear supply and stable current into the El Diablo rather than a high headline rating. The front end scales more easily, since the C1.2 can drive a power amplifier directly through its own volume control, leaving the L1 as a later addition.
by Peak Consult
The speakers completely disappear into space and leave the listener alone with the music, revealing sacred secrets and demonstrating the entire palette of antisocial shades of the author's performance. The three-band system plays from 20 Hz, has a sensitivity of 90 dB, a resistance of 5 ohms and weighs 90 kg.
by CH Precision
CH Precision is an M1.1. 2 x 200 W 8 Ohm power supply, the operation of the driver part is, of course, in pure class A, a fully discrete element base, a 2,200 VA transformer, a 250,000 UF capacitor bank – it can take a long time to list.
by CH Precision
Upsampling DAC with volume control and Linearized R-2R with four PCM1704 chips per channel offers PCM 24 bits, 705.6kHz or 768kHz, DSD via DoP up to DSD512.
by CH Precision
Fully discrete, balanced Dual Monaural line-stage (preamplifier) with heavily regulated and filtered power supplies and extreme wide-bandwidth frequency responses.