Hifiverse

Floorstanding loudspeakers - Peak Consult El Diablo

Description, images, technical data and specifications

Peak Consult El Diablo
Image source - (c) Peak Consult

The El Diablo is a three-way floorstanding loudspeaker from Peak Consult of Denmark, a company founded by Per Kristoffersen in 1996 and now presented under the PEAK Loudspeaker name. Peak Consult calls it one of its most successful products since launch, and the latest version is a complete redesign of the original, with changes to the cabinet, the drive units and the crossover. In the current range it sits between the Sinfonia and the SunFyre.

Key specs that matter

Design is a 3-way, double bass ported design. Crossover frequencies are 350 Hz and 2,400 Hz. Sensitivity is 90 dB (1 W/1 m). Impedance is 5 ohms, utilising PLIC (PEAK Linear Impedance Control). Each speaker measures 115 x 30 x 54 cm (H x W x D) and weighs 90 kg. Standard finishes are Ash, Walnut and Wenge, and full acrylic is available on special order with a 5% surcharge. Bi-wire termination is a no-cost option on special order.

Engineering and use context

Two custom-built 20 cm bass drivers sit in the ported cabinet, and all drive units are PEAK proprietary designs. According to Peak Consult, the PLIC linear impedance crossover allows compatibility with a wide range of amplifiers regardless of their power rating.

Its cabinet is a dense multi-layer construction with built-in dynamic damping properties. Four different adhesives are used in each cabinet, each selected for its specific mechanical properties.

Crossover components are hardwired without PCBs. They are mounted on three MDF boards, one each for HF, MF and LF, inside a sealed, sand-filled chamber that reduces microphonic effects and heat build-up. Speaker terminals are by Argento.

At floor level the El Diablo stands on four stainless steel feet, each decoupled by a double O-ring and equipped with internal ceramic ball bearings, for stable placement on any type of floor surface.

Pairing

No minimum amplifier power is specified, and the impedance curve is linearised by PLIC. Standard termination is single-wire, and bi-wiring requires the special-order terminal option.

Alternatives

The Peak Consult Sinfonia is a smaller three-way ported floorstanding loudspeaker from the same range, with a single 20 cm bass driver and a weight of 78 kg.

Specifications

  • Model name

    El Diablo

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    90

  • Impedance (Ohms)

    5

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    115 x 30 x 54

  • Weight (kg)

    90

  • Official link

More components