Hifiverse

Bookshelf Speakers - Fyne Audio F1-8

Description, images, technical data and specifications

Fyne Audio F1-8
Image source - (c) Fyne Audio

The F1-8 is a two-way standmount loudspeaker in the F1 Series of Fyne Audio, built at the company's own facility in Scotland. It brings the technology of the F1 floorstanding models into a smaller cabinet, hand finished in Piano Gloss Walnut real wood veneer with a burr walnut inlay. UK price is GBP 7,999.99 per pair including VAT.

Key specs that matter

System type is 2 way, with a port that opens downwards onto a BassTrax Tractrix diffuser. Drive unit complement is one 200 mm IsoFlare point source driver with a multi-fibre bass/midrange cone, FyneFlute surround and a 25 mm magnesium dome compression tweeter, on a ferrite magnet system. Crossover frequency is 1.8 kHz. Sensitivity is 91 dB (2.83 V/1 m) and nominal impedance is 8 ohms. Frequency response is 33 Hz - 34 kHz (-6 dB typical in room). Recommended amplifier power is 30 - 180 W RMS, with 90 W RMS continuous and 360 W peak power handling. A front-panel control adjusts the 2.5 - 5.0 kHz region by ±3 dB. Dimensions are 470 x 280 x 441 mm (H x W x D) and net weight is 15.2 kg.

Engineering and use context

In the IsoFlare driver the bass/midrange cone shares a common centre with the high frequency unit, on a rigid cast aluminium chassis. A vented rear chamber in the HF magnet assembly places its low frequency resonance well below the crossover region. The magnesium diaphragm is terminated by a polyester surround, and its annular waveguide has a computer-optimised expansion rate. FyneFlute is a non-homogeneous surround interface that terminates cone energy, with geometry optimised by Finite Element Analysis.

Its crossover is bi-wired, low loss, 2nd order low pass and 1st order high pass, with laminated iron core inductors and Claritycap polypropylene capacitors hard wired on fibre board panels with a special mastic. The complete crossover is deep cryogenically treated. Internal wiring is Van den Hul Matched Crystal OFC copper with silver coating, terminals are gold-plated WBT Nextgen, and a grounding terminal connects to the drive unit chassis.

Below the vent in the base, the Tractrix profile diffuser converts the plane wave into a 360-degree spherical wavefront. BassTrax is patented by Fyne Audio, and the diffuser is part of the machined aluminium platform. The cabinet is pressed high density birch ply, internally braced, with the drive unit coupled to the bracing panels through damping material. Eight self-adhesive feet and four bi-wire links are supplied.

Pairing

Two sets of terminals allow single wiring, bi-wiring or bi-amping with two stereo power amplifiers or four monoblocks. The matching stand is the FS8.

Alternatives

The F1-5 is the smaller standmount of the F1 Series, with a 125 mm IsoFlare driver and a 19 mm magnesium dome compression tweeter.

Specifications

  • Model name

    F1-8

  • Frequency Response low +/- 3dB (Hz)

    33

  • Frequency Response high +/- 3dB (Hz)

    34 000

  • Sensitivity (dB at 1 W/1m)

    91

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    30 - 180

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    47.0 x 28.0 x 44.1

  • Weight (kg)

    15.2

  • Official link

More components