The F701SP is the standmount model of the F700SP Series from Fyne Audio, which also includes the F702SP, F703SP and F704SP floorstanding speakers. According to Fyne, the SP models carry trickle-down upgrades from the F1 Series over the F700 models they are based on. Each F701SP is hand built in the UK. The UK price is GBP 6,499.99 per pair including VAT, and finishes are Natural Walnut plus Piano Gloss Black, Walnut or White. Fyne aims it at mid to large-sized rooms.
Key specs that matter
System type is two-way, with a port that vents downwards onto a BassTrax Tractrix diffuser. Drive unit complement is one 200 mm IsoFlare point source driver with a multi-fibre bass/midrange cone, a FyneFlute surround and a 25 mm magnesium dome compression tweeter on a ferrite magnet system. Crossover frequency is 1.8 kHz. Sensitivity is 90 dB (2.83 V/1 m) and nominal impedance is 8 ohms. Frequency response is 35 Hz - 34 kHz (-6 dB, typical in room). Recommended amplifier power is 30 - 180 W RMS, continuous power handling is 90 W RMS and peak power handling is 360 W. Dimensions are 465 x 278 x 393 mm (H x W x D), and net weight is 14.0 kg.
Engineering and use context
Its IsoFlare unit is the driver of the F1-8, here with a refined HF waveguide for a smoother frequency response. The cabinet is the F701 standmount enclosure in pressed high density birch ply with extensive internal bracing, trimmed in black anodised aluminium. Below it the BassTrax LF diffuser is mounted on a matching black metal plinth.
Fyne overhauled the crossover with computational modelling and extensive listening tests. It is a bi-wired passive low loss network with a 2nd order low pass and a 1st order high pass. HF capacitors are Claritycap high grade low resonance polypropylene types, internal wiring is Neotech PC-OCC, and the terminals are gold-plated WBT Nextgen 0703. After assembly the complete crossover receives Deep Cryogenic Treatment in Fyne's own facility, a process that relaxes stresses in materials, solder joints and cables. An earth terminal connected to the drive unit chassis grounds radio frequency interference.
Grilles attach magnetically. Eight self-adhesive feet and four bi-wire links come in the accessories bag, and Fyne specifies a running-in period of about 100 hours.
Pairing
A stand rated for 14 kg is required, and the matching stand is the Fyne Audio FS8. The separate HF and LF terminal pairs allow bi-wiring. An optional earth connection to the amplifier ground is provided.
Alternatives
The Fyne Audio F700 is the smaller bookshelf speaker of the original F700 Series, with a 150 mm IsoFlare driver and 89 dB sensitivity.