The Cubitt 5 is the first active loudspeaker pair from Fyne Audio in its Cubitt Series. Fyne engineered it in the UK as a self-contained stereo system, with amplification, a DSP crossover, a phono stage and digital inputs built in. It went on sale in June 2026 and reached North America in August 2026. Fyne lists it at GBP 549.98 per pair including VAT.
Key specs that matter
Each cabinet carries one 127 mm IsoFlare point source driver with a FyneFlute surround and a 19 mm concentric titanium dome tweeter, forming a time aligned point source. Amplifier power is 240 W total maximum, with a DSP active crossover. Frequency response is 43 Hz - 34 kHz (-6 dB, typical in room), and maximum resolution is 24 bit/96 kHz. Inputs are Bluetooth 5.0 with aptX HD and AAC, HDMI ARC (2.0 PCM), analogue RCA line, phono (MM or high output MC) and optical digital, and there is a subwoofer output. Mains voltage is 100 - 240 V, power consumption is 200 W, and standby activates after 20 minutes without a signal. The primary unit measures 260 x 165 x 215 mm and weighs 4.2 kg, and the secondary unit is 260 x 165 x 223 mm at 3.6 kg. Finishes are Arctic White, Midnight Black, Olive Green, Pearl Titanium and Pebble Grey.
Engineering and use context
All connections sit on the amplifier panel of the primary unit, which is the left speaker. A wired speaker level connection runs from its latching speaker socket to the right, secondary unit, and a 3 m cable is supplied, with an 8 m cable available as an accessory. Next to the phono inputs is a PHONO GND terminal for the turntable ground lead. The SUB OUT carries a mono signal. On HDMI only 2.0 PCM is supported, so on some televisions eARC has to be disabled. Firmware updates load from a FAT32 USB stick.
The system wakes from standby when a signal arrives on any input except phono. A holder on the rear of the secondary speaker stores the remote. The front LED shows red in standby and blue when it responds to a command. Cabinets are high density MDF with soft radius edges. In the box are eight self-adhesive feet, mains cable, the remote with two AAA batteries and the interconnecting cable.
Pairing
No external amplifier is required. A turntable with an MM or high output MC cartridge connects directly to the phono input. A powered subwoofer connects to the SUB OUT.
Alternatives
Fyne Audio has no other active bookshelf speaker in its range.