Hifiverse

Bookshelf Speakers - Fyne Audio VINTAGE CLASSIC VIII SM

Description, images, technical data and specifications

Fyne Audio VINTAGE CLASSIC VIII SM
Image source - (c) Fyne Audio

Fyne Audio's Vintage Classic VIII SM is a stand-mount loudspeaker from the Vintage Classic series, with design cues taken from 1970s bookshelf speakers. It is built in the UK. Each cabinet is hand-finished in walnut veneer with a deep black baffle and gold trim. Price at Fyne Audio is GBP 3,499.99 per pair including VAT.

Key specs that matter

This is a 2-way design with a downward-facing port and a BassTrax Tractrix diffuser. The drive unit complement is one 200 mm IsoFlare point source driver with a multi-fibre bass/midrange cone, a FyneFlute surround and a 25 mm magnesium dome compression tweeter, on a ferrite magnet system. Crossover frequency is 1.8 kHz. Sensitivity is 91 dB (2.83 V/1 m), and nominal impedance is 8 ohms. Frequency response is 34 Hz - 34 kHz (-6 dB, typical in room). Recommended amplifier power is 30 - 180 W RMS, continuous power handling is 90 W RMS and peak power handling is 360 W. Dimensions are 540 x 330 x 294 mm (H x W x D, with grille and terminals), and net weight is 16.1 kg each.

Engineering and use context

The crossover is a bi-wired passive low-loss network with a 2nd order low pass and a 1st order high pass, and Fyne Audio applies its Cryo-Lite treatment to it. Two level adjustments of ±3 dB are provided, one for the 1.8 kHz - 34 kHz band (High frequency energy) and one for the 2.5 kHz - 5.0 kHz band.

Fyne Audio states that the BassTrax porting is designed for the 360 degree LF wavefront with the speaker mounted above floor level on stands. The cabinet is high-density fibreboard, veneered in walnut, with extensive internal bracing.

Pairing

Tube and solid-state amplifiers within the recommended power range can drive it. The bi-wired crossover allows separate cable runs to the bass/midrange and tweeter sections. Its matching stand is the Fyne Audio FS5.

Alternatives

The Fyne Audio Vintage Classic VIII is the floorstanding version of this model in the same series.

Specifications

  • Model name

    VINTAGE CLASSIC VIII SM

  • Frequency Response low +/- 3dB (Hz)

    34

  • Frequency Response high +/- 3dB (Hz)

    34 000

  • Sensitivity (dB at 1 W/1m)

    91

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    30 - 180

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    54.0 x 33.0 x 29.4

  • Weight (kg)

    16.1

  • Official link

More components