Hifiverse

Preamplifiers — Aries Cerat INCITO S

Description, images, technical data and specifications

Aries Cerat INCITO S
Image source - (c) Aries Cerat

The Incito S is a tube preamplifier from Aries Cerat of Cyprus. It is the successor to the Incito and fits in the same chassis at the same weight. Its gain stage is a zero feedback small SET amplifier with a transformer coupled super triode, and volume is set by a transformer volume control. Aries Cerat also offers a low gain version with a different step-down transformer.

Key specs that matter

Full swing signal bandwidth is 4 Hz - 140 kHz (-6 dB). Harmonic distortion is 0.005% typical and below 0.1% THD at 20 V rms. Maximum gain is 20 dB or 14 dB, selectable, and maximum signal output swing is 32 Vrms into a 10 kohm load in the -6 dB setting. Output impedance is below 50 ohms, or 12 ohms in -6 dB mode. Inputs are five RCA pairs, one optional balanced pair and one proprietary AC link input. The tube complement is two E280F and one 5AR4 rectifier. Weight is 34 kg unpacked.

Engineering and use context

The SET stage uses the E280F, a high trans-conductance tube made primarily by Siemens. It is loaded with a step-down transformer whose secondary windings are reconfigurable, and switches on the back select the gain. Aries Cerat quotes voltage swings of over 320 V from this stage, stepped down to 80 Vpp, or 40 Vpp in the -6 dB configuration. According to the maker, the step-down transformer can drive any load down to 50 ohms.

In the low gain version a step-down transformer with a 20 to 1 ratio sets the gain to 8 dB, and the output can drive any load down to 12 ohms. The power supply uses the 5AR4 rectifier with separate double pi filtering for each channel, oversized chokes and high speed capacitors. Its power transformer is housed in an external chassis on a permanent umbilical cord, and Aries Cerat states that this lowered the noise floor by 20 dB, to below -110 dB.

Volume control and the input system are the same as in the larger Aries Cerat preamplifiers such as the Impera II. The SET bias uses the proprietary AC link technology and is adjustable on the fly with a variable pot, monitored on a built-in dual channel bias meter. A metal-cased remote control with volume, input selection and balance comes with the unit, along with the external power supply.

Pairing

The low gain version is the preferred choice with standard high-gain power amplifiers. Tube and solid-state power amplifiers are both suitable loads. The matching Aries Cerat components are the Symphonia horn speakers and Ianus Geminea monoblock amplifiers.

Alternatives

The Aries Cerat Impera II Ref is a preamplifier with a multi-tap input transformer for attenuation and an Inverted Triode output stage.

Specifications

  • Model name

    INCITO S

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    5

  • Analog outputs (balanced)

    N/A

  • Analog outputs (single-ended)

    N/A

  • Gain (dBu)

    N/A

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    50

  • Output impedance (single-ended) (Ω)

    50

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    N/A

  • Total Harmonic Distortion + Noise (THD+N) (%)

    0.005

  • Dimensions (mm)

    N/A

  • Weight (kg)

  • Official link

    34