The Incito is the smallest and most affordable preamplifier from Aries Cerat. It was developed for some time as a test machine before its launch and was created to keep cost and size below those of its Reference, Signature and Limited Edition preamplifiers. An Incito S version is also listed. The UK price is GBP 10,450.
Key specs that matter
Full swing signal bandwidth is 4 Hz - 100 kHz (-6 dB). Maximum output swing is 32 V RMS into a 10 kohm load, and output impedance is below 50 ohms. Harmonic distortion is 0.005% typical and below 0.1% THD at 20 V RMS. Its tube complement is two E280F and one 5AR4 rectifier. Inputs are five RCA pairs and one balanced pair, and true balanced outputs are standard. Weight is 33 kg unpacked.
Engineering and use context
At the core of the Incito is a zero feedback power gain stage, a transformer-coupled super-triode built on the high transconductance E280F, a tube made solely by Siemens. Each E280F is loaded with a step-down transformer. Voltage swings of over 320 V in the power stage are stepped down to 80 Vpp, and Aries Cerat states that noise figures stay at transistor-like levels. According to the company, the step-down transformer gives a very low output resistance and enough current to drive any load down to 250 ohms.
A 5AR4 rectifier sits at the head of the power supply, followed by separate double pi filtering for each channel with oversized chokes and high speed capacitors. An ultra low noise adjustable bias supply is also included. Volume is set by a discrete relay-latched resistor attenuator with signal relays. All inputs are custom configurable. From the metal-cased remote control, volume, input selection and balance can be adjusted.
Pairing
A power amplifier with balanced XLR inputs connects to the standard balanced outputs. Line-level sources such as a DAC or a phono stage connect to the RCA or balanced inputs.
Alternatives
The Impera II Reference is the larger Aries Cerat preamplifier, with Inverted Triode output tubes and a 26-tap transformer attenuator.