The Impera II Signature Limited Edition is a two-chassis tube preamplifier from Aries Cerat and the second design in its Impera Series to use Gen 2 Inverted Triode technology. Compared with the Impera II it has upgraded quad choke-filtered power supplies, improved inductive coupling between stages and a new proprietary circuit for input stage biasing.
Key specs that matter
Maximum gain is x5 (14 dB) in the high gain version and x2.5 (8 dB) in the medium gain version. Output stage bandwidth is 2 Hz - 500 kHz. Attenuation is by a multi-tap input transformer with 26 taps, switched by small sealed signal relays. Inputs are four unbalanced and one true balanced. Outputs are RCA and AC link, with XLR on demand, and maximum output is 10 V RMS in the high gain version. The power supply is a full-sized chassis with 10 independent supplies rated at 500 VA in total. Total weight is 110 kg unpacked.
Engineering and use context
Gen 2 differs from Gen 1 by using two Inverted Triodes in parallel, at very different operating conditions. Aries Cerat states that this improved distortion, noise and IM figures and almost doubled bandwidth with the same passive components. A new operating point lowers grid (plate) consumption and improves tube life. Its driving and bias stage is a stacked, folded configuration. An amorphous Double C-Core signal choke couples the input tube to the output stage, which drives a Double C-Core output transformer with bifilar windings.
Inside the power supply chassis the layout is true dual mono. Each channel has a damper-diode tube-rectified unit for the driver stage, with dual choke PI filters, low DCR inductors and film capacitors, and a quad of 6AU4 rectifiers supplies these driver stages. Negative bias comes from a GZ34 or 5AR4 tube rectifier and is triple stage filtered. Both Inverted Triode stages have high energy supplies, one per channel, double filtered with low DCR inductors and low ESR capacitors. All stages are locally decoupled at the main unit, where the driver stage uses two custom film capacitors with about 100 times less ESR than most electrolytic capacitors.
Pairing
The AC link output matches Aries Cerat power amplifiers with an AC link input. A power amplifier with balanced inputs requires the XLR output option. The gain version is chosen at order.
Alternatives
The Impera II Reference is another Aries Cerat Inverted Triode preamplifier, with five unbalanced inputs and a 15 V RMS output.