Hifiverse

Preamplifiers — Aries Cerat Imperia II Sig

Description, images, technical data and specifications

Aries Cerat Imperia II Sig
Image source - (c) Aries Cerat

The Impera II Signature is a two-chassis tube preamplifier from Aries Cerat, based on the company's own Inverted Triode Technology. Aries Cerat calls the Signature its grand statement preamplifier. Introduced around 2020, it was the first Impera to fully exploit the second generation of that technology. According to the maker, it shares almost no parts with the Impera II Reference, and the range continues above it with the Impera II Signature Limited Edition.

Key specs that matter

Inputs are four unbalanced and one true balanced. Outputs are RCA and AC link, with XLR on demand. Maximum gain is x5 (14 dB) in the high gain version and x2.5 (8 dB) in the medium gain version, and maximum output is 10 Vrms in the high gain version. Output stage bandwidth is 2 Hz - 500 kHz. Attenuation uses a multi-tap input transformer. The power supply is a full-sized chassis with 10 independent supplies and 500 VA. Total weight is 110 kg.

Engineering and use context

Inside a conventional triode, the electron stream from a heated cathode travels to a flat plate anode and is controlled by a wire grid placed between them. In the Inverted Triode the anode is a wire-grid-like structure and no grid stands between anode and cathode. Control comes from a plate-like electrode, called the control grid, which envelops the cathode and anode and carries a very high negative field. Aries Cerat states that the device acts like a vacuum state transformer, with a gain that is a fraction of unity, a plate resistance 100 times lower than a 6SN7 and zero input capacitance.

Gen 2 uses dual Inverted Triodes in parallel at different operating conditions from Gen 1. Aries Cerat quotes lower distortion, noise and IM figures and almost doubled bandwidth. Its driver and bias stage is a stacked, folded configuration.

Each supply in the external chassis is rectified, filtered and stabilised, with 10 chokes and special quality capacitors. These supplies, mirrored for each channel, run from an encased transformer, and double umbilical cords connect them to the signal chassis for magnetic and EM isolation. Gen 2 tripled the number of independent supplies. Its output transformer uses nano-crystalline cores, and the signal chokes have half the parasitic capacitance of the earlier inductors. Volume is set by Aries Cerat's TVC (transformer volume control). All four heater supplies are triple filtered.

Pairing

A separate power amplifier is required, connected over RCA or, on request, XLR. Its true balanced input accepts a source with balanced outputs, and the four unbalanced inputs accept a DAC, a phono stage or a tuner.

Alternatives

Aries Cerat's Impera II Reference is the lower Impera II preamplifier, also based on Inverted Triode Technology.

Specifications

  • Model name

    Imperia II Sig

  • Analog inputs (balanced)

    1

  • Analog inputs (single-ended)

    4

  • Analog outputs (balanced)

    1

  • Analog outputs (single-ended)

    1

  • Gain (dBu)

    N/A

  • Input sensitivity (mV)

    N/A

  • Output voltage (V)

    N/A

  • Input impedance (balanced) (Ω)

    N/A

  • Input impedance (single-ended) (Ω)

    N/A

  • Output impedance (balanced) (Ω)

    N/A

  • Output impedance (single-ended) (Ω)

    N/A

  • Maximum output level (balanced) (dBu)

    N/A

  • Maximum output level (single-ended) (dBu)

    N/A

  • Volume control range (dBu)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Signal to Noise Ratio (SNR, unweighted) (dB)

    N/A

  • Total Harmonic Distortion + Noise (THD+N) (%)

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    110

  • Official link