The Virgo is a two-chassis tube preamplifier in the Legend Series of Aries Cerat, the company from Cyprus. It is the matching preamplifier to the Achilleas power amplifier, the Zephyrus phono stage, the Homerus DAC and the Contendo II horn speaker system. Listed prices are GBP 144,950 in the UK and USD 144,000.
Key specs that matter
Topology is a dual/parallel SET single stage with one gain stage. Gain is 26 dB, switchable in 26, 22, 18, 14, 10 and 6 dB steps through the TVC system. Tube complement is four E280F, two 6AU4GTA bias rectifiers and four 3B28 xenon rectifiers. Volume control is a 26-step transformer volume control with a left/right balance function. Input impedance is 10 kohms (below 100 Hz), and output impedance is 12 - 300 ohms depending on configuration. Maximum output is 150 V RMS in the high-gain version, 30 V RMS in the medium-gain version and 15 V in the VLG version. Noise floor is below -120 dB unweighted. Inputs are four RCA and one true balanced XLR. Each chassis measures 550 mm wide and 530 mm deep and weighs 70 kg, 140 kg in total.
Engineering and use context
Per channel, a pair of triode-strapped E280F tubes runs in a dual parallel single-ended triode (SET) circuit. Its output stage drives a bifilar output transformer with a nanocrystalline core. Local power decoupling of this stage uses a film capacitor rated for 10,000 A maximum current delivery with an ESR of 1.5 mOhm.
Aries Cerat implements the volume control with specially wound multi-tap input transformers. An array of latching relays selects the active tap of the secondary, and these relays power down when they are not changing state.
Both power supplies are dual mono and tube rectified. A bank of xenon rectifiers powers the high-voltage rails, while the negative bias circuits use the 6AU4 damper diode as rectifier. The bias system also has choke filtration and double trimmed adjustments for each channel, monitored through internal dual meters. No electrolytic capacitors are used anywhere in the unit. Film supercapacitors take their place in the main supply rails and the bias circuits, and the local capacitor bank in the main unit has a maximum surge capability of 30,000 A.
Pairing
The matching power amplifier is the Achilleas. Its HT bypass and the Aries Cerat HT Link allow use with a home theatre processor. Sources with RCA or balanced XLR line outputs connect directly.
Alternatives
The Impera II Signature LE is another Aries Cerat preamplifier, a limited edition with Inverted Triode tubes and a 26-step transformer volume control.