Hifiverse

Regallautsprecher - Genelec G Three

Beschreibung, Bilder, technische Daten und Spezifikationen

Genelec G Three
Bildquelle - (c) Genelec

The G Three is a two-way active loudspeaker in Genelec's Home Audio range, positioned between the G Two and the G Four. Its amplifiers are contained within the cabinet, and it has both balanced XLR and RCA inputs. Genelec offers it in White, Black and RAW versions.

Key specs that matter

Drivers are a 130 mm cone bass driver and a 19 mm metal dome treble driver, with a crossover frequency of 3.0 kHz. Each driver has its own 50 W class D amplifier (short-term output power). Lower and upper cut-off frequencies are 47 Hz and 25 kHz (-6 dB), and free-field response is 54 Hz - 20 kHz (±2.5 dB). Maximum short-term sine wave output, averaged from 100 Hz to 3 kHz in half space, is 104 dB SPL or more at 1 m and 110 dB SPL or more at 0.5 m. Long-term RMS output is 96 dB SPL or more (IEC 60268-1 programme signal, 1 m). At 85 dB SPL, harmonic distortion is below 2% from 50 to 100 Hz and below 0.5% above 100 Hz. Amplifier THD, SMPTE-IM, CCIF-IM and DIM 100 are each 0.05% or less, and signal-to-noise ratio is 100 dB or more referred to full output. Both inputs have an impedance of 10 kOhm. Consumption is below 0.5 W in standby, 3 W idle and 60 W at full output. Dimensions are 299 x 189 x 178 mm (H x W x D) with the Iso-Pod, or 285 mm high without it, and weight is 5.0 kg.

Engineering and use context

Genelec die-casts the reflex-loaded cabinet from aluminium. It is a Minimum Diffraction Enclosure (MDE) with rounded edges, and a Directivity Control Waveguide (DCW) is integrated into its front. Long-term output power is limited by the driver unit protection circuitry.

On the rear panel, Treble gives -2 dB at 15 kHz, Tabletop -4 dB at 200 Hz, Bass 0 to -6 dB at 100 Hz in 2 dB steps and Low Bass -4 dB at 55 Hz. A Level switch changes sensitivity by 10 dB, and LED OFF turns off the power indicator. Two sources can be connected at once to the XLR and RCA inputs, as long as only one is used at a time. With autostart active, the speaker goes into standby one hour after playback has ended and starts again when an input signal is detected.

Three mounting points on the back of the cabinet accept the Iso-Pod vibration-insulating stand, for vertical or symmetrical horizontal positioning with tilt. A threaded hole in the base is compatible with a standard microphone stand, and two sets of rear threaded holes are for Omnimount and König & Meyer brackets. Each G Three is supplied with a 1.8 m mains cable, the operating manual and an Iso-Pod kit.

Pairing

A line-level source with a balanced XLR or RCA output is required. Speaker terminals of a power amplifier must not be connected. Genelec's F Series subwoofers are the matching subwoofers.

Alternatives

The G Four is the next Genelec Home Audio model, with a 165 mm bass driver, two 90 W amplifiers and a 41 Hz lower cut-off.

Spezifikationen

  • Modellbezeichnung

    G Three

  • Untere Grenzfrequenz +/- 3dB (Hz)

    47

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    50 + 50

  • Größe (sm)

    29.9 x 18.9 x 17.8

  • Gewicht (kg)

    5

  • Offizieller Link

Weitere Komponenten