The 8380A is an adaptive three-way SAM Main Monitor that joins the flagship 8381A in Genelec's The Main Ones series. Genelec launched it on 30 September 2025, with shipping from the first quarter of 2026. It is intended for medium and large control rooms in recording, film and video post-production, broadcast and mastering, either free-standing or flush-mounted, at a minimum listening distance of 1.3 m. Genelec builds it in Iisalmi, Finland.
Key specs that matter
Low frequencies come from a 380 mm cone in a 110 litre MDF bass reflex enclosure. A Minimum Diffraction Coaxial (MDC) driver combines a 130 mm midrange cone with a 25 mm aluminium dome tweeter. Its RAM-L2 amplifier unit has 500 W Class D for bass, 250 W Class D for midrange and 200 W Class AB for treble. Crossover frequencies are 470 Hz and 2.5 kHz. Frequency response is 29 Hz - 43 kHz (-6 dB), with ±1.5 dB accuracy from 38 Hz to 20 kHz. Maximum short-term SPL is >122 dB (averaged 100 Hz - 3 kHz, 1 m) and >118 dB averaged 50 - 100 Hz at 10% THD, long-term SPL is >115 dB, and peak output per pair is >124 dB at 2 m. Self-generated noise is ≤0 dB SPL (A-weighted, 1 m). Harmonic distortion at 95 dB SPL is ≤0.5% above 50 Hz. Latency is 2.8 ms, or 6.6 ms with Extended Phase Linearity on. The enclosure measures 810 x 480 x 420 mm (H x W x D), and weight is 54 kg, or 48 kg with the amplifier removed.
Engineering and use context
In the MDC driver the joints between tweeter, midrange cone and Directivity Control Waveguide form one continuous shape. Genelec says the coaxial driver is built for a more directive design than that of The Ones, and the tweeter is a dome rather than the compression driver of the 8381A. The reflex port design supports traditional soffit mounting.
The RAM-L2 is silently cooled and sits on vibration absorbers at the rear of the enclosure. It can also be detached and installed in an equipment rack, where its front panel is 3U (132 mm) by 483 mm and it weighs 6 kg. A front plate and two rack mount ears are included. Both the monitor and RAM-L2 have the same dimensions as the 1038A, 1038B and 1238A and the RAM-L amplifier. DSP in the amplifier includes driver and amplifier overload protection, parametric filters, level alignment and acoustic delay compensation, set through GLM. Inputs are a balanced 10 kOhm XLR analogue and an AES/EBU input at 32 - 192 kHz, 16 - 24 bit, with a thru output and two RJ45 GLM sockets. Power consumption is <0.5 W in standby and 21 W idle. Finishes are black and white.
Pairing
A balanced analogue or AES/EBU source is required. Genelec specifies phase matching with the 8300 series, The Ones and The Main Ones.
Alternatives
The Genelec 8381A is the flagship of The Main Ones series and the model above the 8380A.