Hifiverse

Regallautsprecher - Genelec 8330A

Beschreibung, Bilder, technische Daten und Spezifikationen

Genelec 8330A
Bildquelle - (c) Genelec

Genelec's 8330A is a two-way Smart Active Monitor (SAM) that sits one step above the 8320A, with more SPL and lower bass extension in a still compact die-cast enclosure. It was introduced in 2014. Colour options are dark grey, white, black and RAW, the last with the aluminium left unpainted.

Key specs that matter

A 130 mm cone bass driver and a 19 mm metal dome tweeter are used, both magnetically shielded and each driven by a 50 W Class D amplifier (short-term, THD below 0.05%). The crossover is at 2.9 kHz. Frequency response is 45 Hz - 23 kHz (-6 dB) and ±1.5 dB from 58 Hz to 20 kHz. Maximum short-term SPL is ≥104 dB (sine, on axis in half space, averaged 100 Hz - 3 kHz, 1 m), long-term ≥96 dB and peak per pair ≥110 dB. At 85 dB SPL, harmonic distortion stays below 2% from 50 to 100 Hz and below 0.5% above 100 Hz. Self-generated noise is ≤5 dB SPL (A-weighted). Inputs are an analog XLR (balanced, 10 kOhm, maximum +24 dBu) and an AES/EBU XLR at 16-24 bit and 32-192 kHz, with a male XLR digital output, plus two RJ45 GLM ports. Power draw is ≤0.5 W in ISS, ≤3 W idle and 50 W at full output on 100-240 V AC. Dimensions are 285 x 189 x 178 mm (H x W x D), or 299 mm high on the Iso-Pod, and weight is 5.1 kg.

Engineering and use context

Each monitor carries its own SAM DSP, with the drivers directly connected to dedicated Class D power amplifiers and system protection implemented in the signal processing. High-frequency group delay is 2.9 ms with Extended Phase Linearity off. Genelec builds the Minimum Diffraction Enclosure (MDE) from die-cast aluminium shaped to reduce edge diffraction, together with a Directivity Control Waveguide (DCW), and the enclosure type is reflex port.

On the digital side, the AES/EBU output passes the signal on to the next monitor or subwoofer, and subframe A or B is selected in GLM. Up to 30 monitors and subwoofers can be daisy-chained to a computer through the GLM Adapter, and calibrated settings can be saved inside the monitors. ISS standby is off by default and is enabled in GLM. Its Iso-Pod stand is made of a lossy rubber-like material and allows a ±15° tilt. A threaded hole in the base suits a standard microphone stand, and two M6 x 10 mm rear inserts accept wall or ceiling brackets. Supplied with the monitor are a 1.8 m mains cable and a 5 m RJ45 cable.

Pairing

A source with a balanced analog XLR output or an AES/EBU digital output is required. Calibration needs GLM software and either the 9320A SAM Reference Controller or the GLM Calibration Kit, both sold separately.

Alternatives

The Genelec 8340A is the larger SAM two-way model, with a 165 mm bass driver, 150 W Class D amplifiers per driver and a 38 Hz lower limit at -6 dB.

Spezifikationen

  • Modellbezeichnung

    8330A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    45

  • Obere Grenzfrequenz +/- 3dB (Hz)

    23 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    50 + 50

  • Größe (sm)

    29.9 x 18.9 x 17.8

  • Gewicht (kg)

    5.1

  • Offizieller Link

Weitere Komponenten